Practical Application of SPC in the Wire and Cable Industry

Technometrics ◽  
1992 ◽  
Vol 34 (1) ◽  
pp. 101
Author(s):  
Karen L. Jensen ◽  
Douglas B. Relyea
1983 ◽  
Vol 56 (2) ◽  
pp. 287-298 ◽  
Author(s):  
H. Kato ◽  
H. Adachi ◽  
H. Fujita

Abstract A series of experiments on the flammability of EPDM formulations which contained a minimum amount (30 phr) of aromatic organic flame retardant (DBDO) revealed that increasing the crosslink density increased the flame resistance. This was especially true when the formulations were cured by a combination of DCP, TAIC, and HVA-2. The best result was obtained in a formulation which was cured by DCP/TAIC/HVA-2 at 2.5/1.0/0.5 phr, respectively. This material had excellent physical properties that would be well suited for use in the wire and cable industry. It was also found that good dispersion of individual ingredients was needed to obtain optimum flame resistance.


1967 ◽  
Author(s):  
J. B. Martin ◽  
W. O. Bracken ◽  
E. W. Cronin
Keyword(s):  

2012 ◽  
Vol 590 ◽  
pp. 309-312
Author(s):  
Yu Bao Cao

Wire feeder is a welding wire delivery device widely used in TIG and CO2 gas welding. Smooth wire feeding directly affects the quality of welding. A small welding wire feeder was improved. The wire feeder and the welding wire plate were centrally located in the torch. This has reduced the wire transmission resistance and increased the mobile flexibility. Practical application proved that it has the characteristics of wire feeding stable and reliable, high welding productivity and high quality and stability of weldments. It has a significant impact on improvement of the existing welding and broad application prospects in welding industrial production.


Author(s):  
F. A. Heckman ◽  
E. Redman ◽  
J.E. Connolly

In our initial publication on this subject1) we reported results demonstrating that contrast is the most important factor in producing the high image quality required for reliable image analysis. We also listed the factors which enhance contrast in order of the experimentally determined magnitude of their effect. The two most powerful factors affecting image contrast attainable with sheet film are beam intensity and KV. At that time we had only qualitative evidence for the ranking of enhancing factors. Later we carried out the densitometric measurements which led to the results outlined below.Meaningful evaluations of the cause-effect relationships among the considerable number of variables in preparing EM negatives depend on doing things in a systematic way, varying only one parameter at a time. Unless otherwise noted, we adhered to the following procedure evolved during our comprehensive study:Philips EM-300; 30μ objective aperature; magnification 7000- 12000X, exposure time 1 second, anti-contamination device operating.


Author(s):  
A. W. West

The influence of the filament microstructure on the critical current density values, Jc, of Nb-Ti multifilamentary superconducting composites has been well documented. However the development of these microstructures during composite processing is still under investigation.During manufacture, the multifilamentary composite is given several heat treatments interspersed in the wire-drawing schedule. Typically, these heat treatments are for 5 to 80 hours at temperatures between 523 and 573K. A short heat treatment of approximately 3 hours at 573K is usually given to the wire at final size. Originally this heat treatment was given to soften the copper matrix, but recent work has shown that it can markedly change both the Jc value and microstructure of the composite.


2000 ◽  
Vol 5 (6) ◽  
pp. 1-7
Author(s):  
Christopher R. Brigham ◽  
James B. Talmage ◽  
Leon H. Ensalada

Abstract The AMA Guides to the Evaluation of Permanent Impairment (AMA Guides), Fifth Edition, is available and includes numerous changes that will affect both evaluators who and systems that use the AMA Guides. The Fifth Edition is nearly twice the size of its predecessor (613 pages vs 339 pages) and contains three additional chapters (the musculoskeletal system now is split into three chapters and the cardiovascular system into two). Table 1 shows how chapters in the Fifth Edition were reorganized from the Fourth Edition. In addition, each of the chapters is presented in a consistent format, as shown in Table 2. This article and subsequent issues of The Guides Newsletter will examine these changes, and the present discussion focuses on major revisions, particularly those in the first two chapters. (See Table 3 for a summary of the revisions to the musculoskeletal and pain chapters.) Chapter 1, Philosophy, Purpose, and Appropriate Use of the AMA Guides, emphasizes objective assessment necessitating a medical evaluation. Most impairment percentages in the Fifth Edition are unchanged from the Fourth because the majority of ratings currently are accepted, there is limited scientific data to support changes, and ratings should not be changed arbitrarily. Chapter 2, Practical Application of the AMA Guides, describes how to use the AMA Guides for consistent and reliable acquisition, analysis, communication, and utilization of medical information through a single set of standards.


Sign in / Sign up

Export Citation Format

Share Document