National Surety Co. et al. v. Commonwealth ex rel. Westinghouse Electric & Mfg. Co. June 12, 1919. [99 S. E. 657.]

1920 ◽  
Vol 5 (10) ◽  
pp. 777
Alloy Digest ◽  
1963 ◽  
Vol 12 (9) ◽  

Abstract Westinghouse Alloy B66 is a columbium-base alloy exhibiting superior strength at temperatures in excess of 2000 F, yet retaining sufficient ductility for formability and weldability by conventional means. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cb-5. Producer or source: Westinghouse Electric Corporation.


Alloy Digest ◽  
1954 ◽  
Vol 3 (12) ◽  

Abstract K-42-B is a nickel-cobalt-chromium-iron alloy having high resistance to heat and corrosion. It responds to a precipitation-hardening heat treatment producing high tensile and creep characteristics at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-13. Producer or source: Westinghouse Electric Corporation.


Alloy Digest ◽  
1964 ◽  
Vol 13 (6) ◽  

Abstract Nivco 10 is a cobalt-base turbine alloy having a combination of high damping capacity, high strength and high ductility. It is a precipitation hardening alloy recommended for use at temperatures up to 1200 F, such as turbine blades. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-37. Producer or source: Westinghouse Electric Corporation.


Author(s):  
S. H. DeWitt ◽  
W. B. Boyum

An Internally fired semi-closed cycle gas turbine for Naval propulsion was designed and built for the U.S. Navy by the Westinghouse Electric Corporation. Due to a revision of the overall Navy propulsion program the plant was not tested at design conditions or mode of operation, but feasibility information for this configuration of gas turbine plant was obtained. Plant tests indicated that this cycle configuration can be expected to attain a significant reduction in shipboard space and weight requirements while matching existing conventional propulsion plant fuel and air consumption rates over a wide load range. The plant further is simply controlled to minimize manning personnel, permit bridge control, and has a brief transient period from cruise power to full load. Plants of this cycle configuration can be expected to produce large powers such as required for main ship propulsion while employing components of the size where considerable industrial experience has been accumulated. Fouling and corrosion of the internally fired, semi-closed cycle gas turbine were evaluated by the tests. Conventional gas turbine components are satisfactory for low sulfur fuel operation, and with additional precooler equipment development it is expected that high sulfur fuel operation will be achieved.


1950 ◽  
Vol 43 (1) ◽  
pp. 35-36
Author(s):  
Phillip S. Jones

Are you helping your students to “miss a boat”? You are if you have not realized the possibilities offered to your students by the Westinghouse Science Scholarships. The forty final contestants for the $1,000 worth of scholarships donated annually by the Westinghouse Electric Corporation are determined through a Science Talent Search administered by Science Service. One of the requirements for each competitor is that he write an essay on “My Scientific Project.” Four of the projects submitted by the 1949 finalists dealt with mathematical topics.


Author(s):  
Joseph K. Rabovitser ◽  
Mark J. Khinkis ◽  
Ronald L. Bannister ◽  
Frank Q. Miao

An investigation into the potential benefits of thermochemical recuperation and partial oxidation in advanced natural gas-fired turbine systems is being carried out by a team consisting of the Westinghouse Electric Corporation and the Institute of Gas Technology under contract to the U.S. Department of Energy and the Gas Research Institute. The purpose of this study is to determine whether the application of thermochemical recuperation and/or partial oxidation technologies to advanced natural gas-fired power generation systems provides performance and/or cost benefits. This paper presents an overview of the concepts and technologies which are under investigation, as well as several of the thermodynamic cycles which are being developed to determine their viability.


Sign in / Sign up

Export Citation Format

Share Document