scholarly journals Rapid liquid-liquid extraction of thallium(III) from succinate media with 2-octylaminopyridine in chloroform as the extractant

2008 ◽  
Vol 73 (4) ◽  
pp. 435-451 ◽  
Author(s):  
Sandip Mahamuni ◽  
Prakash Wadgaonkar ◽  
Mansing Anuse
Keyword(s):  
Sodium Succinate ◽  
Volume Ratio ◽  
Selective Extraction ◽  
Analysis Method ◽  
Extraction Equilibrium ◽  
Slope Analysis ◽  
Liquid Liquid Extraction ◽  
Extraction Study ◽  
Quantitative Extraction

A simple solvent extraction study of thallium(III) was conducted. Selective and quantitative extraction of thallium(III) by 2-octylaminopyridine (2-OAP) in chloroform occurred from aqueous sodium succinate medium (0.0075 M) at pH 3.0. Thallium(III) was back extracted with acetate buffer (pH 4.63). The effect of the concentration of succinate and 2-OAP, the role of various diluents, stripping agents, loading capacity of 2-OAP, equilibrium time and aqueous:organic volume ratio on the extraction of thallium(III) was studied. The stoichiometry of the extracted species was determined based on the slope analysis method and found to be 1: 2: 1 (metal:acid:extractant). The temperature dependence of the extraction equilibrium constant was also examined to estimate the apparent thermodynamic functions ?H, ?G and ?S for the extraction reaction. The method is free from interference of a large number of cations and anions. The method was used for the selective extraction of thallium(III) from its binary mixture with Zn(II), Cd(II), Hg(II), Bi(III), Pb(II), Se(IV), Te(IV), Sb(III), Ga(III), In(III), Al(III), Tl(I) and Fe(III). The proposed method was applied to the synthetic mixtures and alloys. It is simple, selective, rapid and eco-friendly.

scholarly journals Development of a Reliable Analytical Method for Liquid Anion-Exchange Extraction and Separation of Neodymium(III)

2012 ◽  
Vol 2012 ◽  
pp. 1-7
Author(s):  
Balasaheb N. Kokare ◽  
Ganesh S. Kamble ◽  
Balasaheb M. Sargar ◽  
Mansing A. Anuse
Keyword(s):  
Volume Ratio ◽  
Selective Extraction ◽  
Liquid Extraction ◽  
Back Extraction ◽  
Extractant Concentration ◽  
Extraction And Separation ◽  
Slope Analysis ◽  
Liquid Liquid Extraction ◽  
Exchange Extraction ◽  
Reliable Analytical Method

The liquid-liquid extraction of neodymium(III) from succinate media (0.06 M) has been studied at pH 6.0 with the solution of 0.1 M of N-n-octylaniline in xylene when equilibrium is maintained for 5 min. The back-extraction of neodymium(III) has been performed by using 0.1 M HClO4. The effect of various parameters, such as pH, equilibrium time, extractant concentration, stripping agents, organic diluents, and aqueous to organic volume ratio on the extraction of neodymium(III) has been studied. On the basis of slope analysis, the stoichiometry of the extracted species was determined as 1 : 1 : 2[RR′NH2+Nd(succinate)2-](org). The method is free from interference of large number cations and anions. The method was used for the selective extraction of neodymium(III) from its binary mixture with U(VI), Zr(IV), Nb(V), La(III), Th(IV), Ce(IV), and Y(III). The proposed method is selective and was successfully applied to the synthetic mixtures to show the practical utility of the extractant.

Liquid-liquid extraction of succinate using a dicopper cryptate

2020 ◽  
Author(s):  
Riccardo Mobili ◽  
Sonia La Cognata ◽  
Francesca Merlo ◽  
Andrea Speltini ◽  
Massimo Boiocchi ◽  
...  
Keyword(s):  
Aqueous Phase ◽  
Visible Spectrum ◽  
Tca Cycle ◽  
Residual Concentration ◽  
Waste Products ◽  
Liquid Liquid Extraction ◽  
The Tca Cycle ◽  
Quantitative Extraction ◽  
Uv Visible

<div> <p>The extraction of the succinate dianion from a neutral aqueous solution into dichloromethane is obtained using a lipophilic cage-like dicopper(II) complex as the extractant. The quantitative extraction exploits the high affinity of the succinate anion for the cavity of the azacryptate. The anion is effectively transferred from the aqueous phase, buffered at pH 7 with HEPES, into dichloromethane. A 1:1 extractant:anion adduct is obtained. Extraction can be easily monitored by following changes in the UV-visible spectrum of the dicopper complex in dichloromethane, and by measuring the residual concentration of succinate in the aqueous phase by HPLC−UV. Considering i) the relevance of polycarboxylates in biochemistry, as e.g. normal intermediates of the TCA cycle, ii) the relevance of dicarboxylates in the environmental field, as e.g. waste products of industrial processes, and iii) the recently discovered role of succinate and other dicarboxylates in pathophysiological processes including cancer, our results open new perspectives for research in all contexts where selective recognition, trapping and extraction of polycarboxylates is required. </p> </div>

scholarly journals Liquid-liquid extraction of succinate using a dicopper cryptate

2020 ◽  
Author(s):  
Riccardo Mobili ◽  
Sonia La Cognata ◽  
Francesca Merlo ◽  
Andrea Speltini ◽  
Massimo Boiocchi ◽  
...  
Keyword(s):  
Aqueous Phase ◽  
Visible Spectrum ◽  
Tca Cycle ◽  
Residual Concentration ◽  
Waste Products ◽  
Liquid Liquid Extraction ◽  
The Tca Cycle ◽  
Quantitative Extraction ◽  
Uv Visible

<div> <p>The extraction of the succinate dianion from a neutral aqueous solution into dichloromethane is obtained using a lipophilic cage-like dicopper(II) complex as the extractant. The quantitative extraction exploits the high affinity of the succinate anion for the cavity of the azacryptate. The anion is effectively transferred from the aqueous phase, buffered at pH 7 with HEPES, into dichloromethane. A 1:1 extractant:anion adduct is obtained. Extraction can be easily monitored by following changes in the UV-visible spectrum of the dicopper complex in dichloromethane, and by measuring the residual concentration of succinate in the aqueous phase by HPLC−UV. Considering i) the relevance of polycarboxylates in biochemistry, as e.g. normal intermediates of the TCA cycle, ii) the relevance of dicarboxylates in the environmental field, as e.g. waste products of industrial processes, and iii) the recently discovered role of succinate and other dicarboxylates in pathophysiological processes including cancer, our results open new perspectives for research in all contexts where selective recognition, trapping and extraction of polycarboxylates is required. </p> </div>

scholarly journals Extraction and separation of titanium(IV) with D2EHPA and PC-88A from aqueous perchloric acid solutions

2002 ◽  
Vol 67 (7) ◽  
pp. 507-521 ◽  
Author(s):  
Rajeev Singh ◽  
Purshottamm Dhadke
Keyword(s):  
Liquid Extraction ◽  
Acid Solutions ◽  
Extraction And Separation ◽  
Slope Analysis ◽  
Liquid Liquid Extraction ◽  
Quantitative Extraction ◽  
Aqueous Perchloric Acid ◽  
Loaded Organic Phase ◽  
Species Being

The liquid-liquid extraction of Ti(IV) from perchlorate media using di(2-ethylhexyl) phosphoric acid (D2EHPA) and 2-ethylhexyl prosphonic acid mono-2-ethylhexyl ester (PC-88A) in toluene as the extractant was studied Quantitative extraction of Ti(IV) was observed in the lower acidity range of 0.01 to 0.1 mol dm-3 with 0.003 mol dm-3 D2EHPA and 0.01 mol dm-3 PC-88A in toluene, respectively, and in the higher acidity range of 9.0 to 10.0 mol dm-3 with 0.1 mol dm-3 D2EHPA and PC-88A in toluene. Ti(IV) was completely stripped from the metal loaded organic phase of both the extractants with 3%H2O2 in 1M H2SO4 and determined spectrophotometrically. The stoichiometry of the extracted species was determined on the basis of slope analysis. The extraction in the lower acidity range was found to proceed by a cation-exchange mechanism with the extracted species being TiOR2.2HR while in the higher acidity range it was by solvation with the extracted species being Ti(OH)3ClO4.4HR. Separation of Ti(IV) was also carried out from some associated metals like Fe(III), Al(III), V(V), Ce(IV), Mg(II) and Mn(II). The developed methods were extended for the determination of Ti(IV) in real samples like ilmenite, magnetite and red mud in order to show the practical utility of the extractants.

Liquid-liquid extraction of Nd+3 and Eu+3 from aqueous medium using oxytetracycline in dichloromethane

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Shabnam Shahida ◽  
Faisal Hayat ◽  
Akbar Ali ◽  
Muhammad Imran Khan ◽  
Shagufta Zafar ◽  
...  
Keyword(s):  
Sea Water ◽  
Liquid Extraction ◽  
Equilibration Time ◽  
Analysis Method ◽  
Acidic Solutions ◽  
Slope Analysis ◽  
Liquid Liquid Extraction ◽  
Extraction Parameters ◽  
Conjugate Base ◽  
Radiometric Technique

Abstract Liquid-liquid extraction system consisting of oxytetracycline (HOTC) in dichloromethane was developed for extraction of Nd+3 and Eu+3 from acidic solutions using radiometric technique. Various extraction parameters such as pH, equilibration time and metals concentration were optimized. Slope analysis method was used to study the composition of product and was found to be M(OTC)3 [here M=Nd+3 or Eu+3 and OTC = conjugate base of HOTC]. Among cations Al+3 and Fe+3 while among anions F− effected the extraction of these metals. Higher separation factor of these metals was found with many others. The method was successfully applied on spiked sea water.

scholarly journals Solvent Extraction of Scandium and Yttrium Using Carboxylic Acid

2021 ◽  
Vol 333 ◽  
pp. 04010
Author(s):  
Jeong-Yi Moon ◽  
Syouhei Nishihama ◽  
Kazuharu Yoshizuka
Keyword(s):  
Solvent Extraction ◽  
Analysis Method ◽  
Adsorption Model ◽  
Organic Solution ◽  
Extraction Equilibrium ◽  
Langmuir Adsorption ◽  
Langmuir Adsorption Model ◽  
Slope Analysis ◽  
Impregnated Resin ◽  
Aqueous Chloride

Separation of scandium (Sc) from yttrium (Y) in aqueous chloride media by solvent extraction using Versatic acid 10 was investigated. Conventional slope analysis method revealed the extraction equilibrium formulation of the metals. Sc is more strongly extracted than Y by Versatic acid 10, and the separation factor of the metals is quite high at 1.93 × 104. Complete stripping of Sc from the loaded organic solution of Versatic acid 10 was achieved by 3M HCl solution. Then Versatic acid 10 was applied to solvent impregnated resin (SIR), separation of Sc was progressed via Langmuir adsorption model.

The Role of Muslim Women in Civil Society In Promoting Values and Principles for Building Peace: Action Guide from The Qur’ān

Sains Insani ◽  
2019 ◽  
Vol 4 (1) ◽  
pp. 30-36
Author(s):  
Che Amnah Bahari ◽  
Fatimah Abdullah
Keyword(s):  
Civil Society ◽  
Lifelong Learning ◽  
Significant Role ◽  
Textual Analysis ◽  
Muslim Women ◽  
Peace Building ◽  
Analysis Method ◽  
Pluralistic Society ◽  
Women And Children

The whole world, the Muslim in particular has witnessed conflicts in different areas, which have hindered the developmental efforts of the nations concerned. It should be learned that most victims of these conflicts are women and children. This article attempts to elaborate the role of Muslims Women as a crucial segment in civil society in initiating peace building through nurturing process. It maintains that the adoption of the principles and values derived from the Qur’ān and Sunnah of the Prophet is necessary as a process of lifelong learning.  Those identified values constituted the framework of this article and it adopts the textual analysis method.   This article concludes that through the implementation of those values and frameworks for peace building, women as one of the important segments of civil society are able to play significant role towards initiating peace building and promoting peaceful co-existence in pluralistic society. Abstrak: Dunia Islam khususnya telah menyaksikan konflik di pelbagai daerah yang berbeza. Konflik ini telah menghalang usaha kearah pembangunan Kawasan yang berkenaan. Kebanyakan mangsa konflik ini adalah wanita dan kanak-kanak. Artikel ini cuba untuk menghuraikan peranan wanita Islam sebagai segmen penting dalam masyarakat madani dalam membangun proses kedamaian dengan mendidik dan memupuk prinsip dan nilai murni janaan al-Qur’an. Penggunaan prinsip dan nilai yang dikutip dari ayat-ayat Qur'an dan hadis Rasulullah adalah keperluan yang mendesak sebagai wadah bagi proses pembelajaran sepanjang hayat. Nilai-nilai yang dikenal pasti merupakan rangka kerja artikel ini, dan metod yang dirujuk adalah analisis teks. Artikel ini menyimpulkan bahawa melalui pelaksanaan nilai-nilai dan kerangka kerja Islam bagi proses kedamaian, wanita Islam dalam masyarakat madani mampu memainkan peranan penting dalam memulakan pembinaan keamanan dan menggalakkan kehidupan yang harmonis, sejahtera dan saling bantu membantu dalam masyarakat majmuk.

Efficient trace-scale extraction method of reactor produced 199Au adequate for nuclear medicine applications

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Mohamed F. Attallah ◽  
Ahmed M. Shahr El-Din ◽  
Mohamed A. Gizawy ◽  
Amal M. I. Ali
Keyword(s):  
Aqueous Media ◽  
Selective Extraction ◽  
Extraction Process ◽  
High Yield ◽  
High Recovery ◽  
Rapid Separation ◽  
Efficient Separation ◽  
Liquid Liquid Extraction ◽  
Cyanex 302 ◽  
Cyanex 923

Abstract Production of no carrier-added (NCA) 199Au through natPt(n, γ) reaction and subsequent purification using liquid-liquid extraction from other radioisotopes is studied in the context of theranostic application. Comparative separation of NCA 199Au after dissolution of activated Pt target using three Cyanex compounds (Cyanex-272, Cyanex-302 and Cyanex-923) is evaluated. The extraction process is optimized in terms of the type of extractant, the concentration of extractant, extraction time and aqueous media (HNO3, NH4OH). Among these extractants, the Cynaex-923 is efficient and promising for rapid separation and production of NCA 199Au from HNO3 by high extraction %. Selective extraction of 199Au from other Pt and Ir radioisotopes is observed. High recovery of 199Au was obtained in the case of Cyanex-923 using 0.05 M thiourea dissolved in HCl or 2 M NaOH. Our results find the Cyanex-923 as a promising extractant for efficient separation of 199Au from irradiated Pt target with high yield (99%).

The “Halalification” of tourism

2017 ◽  
Vol 8 (4) ◽  
pp. 558-577 ◽  
Author(s):  
Faiza Khan ◽  
Michelle Callanan
Keyword(s):  
Design Methodology ◽  
Secondary Data ◽  
Market Segment ◽  
Analysis Method ◽  
Review Of Literature ◽  
Primary Research ◽  
Content Type ◽  
Starting Point ◽  
Practical Implications

Purpose The purpose of this paper is to address the confusing use of terminology associated with tourism undertaken by Muslims and to identify key concerns associated with this type of tourism. Design/methodology/approach This is an exploratory study and adopts a critical review of literature following the evolutionary concept analysis method. Content analysis of popular UK media, UK-based tour operators’ websites and tourism strategies of destinations popular with Muslim tourists were conducted to examine the use of terminology. Findings There is no clear difference between the various terms (halal, Muslim friendly, Islamic, etc.) used. Overall, academia uses the term Islamic tourism, while the industry and media use various terms. Among destinations, however, there is no clear and consistent use of terminology. A key concern of Islamic tourism is the role of certification in assuring travellers and the lack of standardisation of halal certification. Research limitations/implications The paper is based on literature review and secondary data analysis. It lacks primary research. Practical implications This study highlights the need for consistent use of terminology across industry. Another implication is the issue surrounding halal certification of food and the importance of trust in the seller/service provide. Another trend that industry providers need to consider is the growth of the Muslim millennial traveller and the needs of this market segment. Originality/value The paper highlights the importance of studying the Muslim tourist market and provides a starting point for further research. It highlights several issues such as the need to develop a typology of Muslim tourists. Of particular interest is the concern whether halal values in danger of being commodified in the absence of a universal agreed criterion for halal certification.

scholarly journals Tantalum and Niobium Selective Extraction by Alkyl-Acetophenone

Metals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 654 ◽  
Author(s):  
Moussa Toure ◽  
Guilhem Arrachart ◽  
Jean Duhamet ◽  
Stephane Pellet-Rostaing
Keyword(s):  
Extraction Efficiency ◽  
Methyl Isobutyl Ketone ◽  
Selective Extraction ◽  
Extraction Process ◽  
Liquid Extraction ◽  
Methyl Isobutyl ◽  
Isobutyl Ketone ◽  
Waste Solution ◽  
Liquid Liquid Extraction ◽  
D Values

A study has been carried out on Ta and Nb recovery by a liquid-liquid extraction process using 4-methylacetophenone (4-MAcPh) as the organic phase. The 4-MAcPh was compared to methyl isobutyl ketone (MIBK) with respect to extraction efficiencies (D values) at different concentrations of H2SO4 in the aqueous phase. The results showed a similar extraction of Nb for both solvents. However, for Ta, extraction efficiency is increased by a factor of 1.3 for 4-MAcPh. In addition, the MIBK solubilized completely after 6 mol∙L−1 of H2SO4 against only a loss of 0.14–4% for 4-MAcPh between 6 and 9 mol∙L−1 of H2SO4. The potential of 4-MAcPh has also been studied to selectively recover Ta from a model capacitor waste solution. The results showed a selectivity for Ta in the presence of impurities such as Ag, Fe, Ni and Mn. The 4-MAcPh also presents the advantage of having physicochemical properties adapted to its use in liquid-liquid extraction technologies such as mixer-settlers.

Sign in / Sign up

Export Citation Format

Share Document