scholarly journals An alkali catalyzed trans-esterification of rice bran, cottonseed and waste cooking oil

2014 ◽  
Vol 68 (3) ◽  
pp. 347-355 ◽  
Author(s):  
Faheem Akhtar ◽  
Yasir Elsheikh ◽  
M. Bassyouni ◽  
Monazza Kaukab ◽  
Ayyaz Muhammad ◽  
...  
Keyword(s):  
Rice Bran ◽  
Rice Bran Oil ◽  
Research Work ◽  
Maximum Yield ◽  
Waste Cooking Oil ◽  
Edible Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Biodiesel Fuel ◽  
Cooking Oil

In this research work, biodiesel production by trans-esterification of three raw materials including virgin and used edible oil and non edible oil has been presented. A two step method following acidic and alkali catalyst was used for non edible oil due to the unsuitability of using the straight alkaline-catalyzed trans-esterification of high FFA present in rice bran oil. The acid value after processing for rice bran, cottonseed and waste cooking oil was found to be 0.95, 0.12 and 0.87 respectively. The influence of three variables on percentage yield i.e., methanol to oil molar ratio, reaction temperature and reaction time were studied at this stage. Cottonseed oil, waste cooking oil and rice bran oil showed a maximum yield of 91.7%, 84.1% and 87.1% under optimum conditions. Fuel properties of the three biodiesel satisfied standard biodiesel fuel results.

scholarly journals Hybrid Response Surface Method-African Buffalo Optimization Technique for Ultrasonic Production of Biodiesel from Waste Cooking Oil using Li doped CaO Nanocatalyst

2020 ◽  
Vol 9 (5) ◽  
pp. 1938-1947
Keyword(s):  
Response Surface ◽  
Methyl Esters ◽  
Optimization Technique ◽  
Research Work ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
African Buffalo ◽  
Cooking Oil ◽  
Used Cooking Oil

In the current era, there is an increasing emphasis on green fuels for a clean environment. Authors in this work have tried to devise an innovative method to optimize ultrasonic production of biodiesel from used cooking oil, using composite technique combining Response surface Methodology and African Buffalo optimization. In this research work, heterogeneous catalyst Lithium doped CaO has been obtained from a new natural source by high-temperature thermal decomposition of Musa Balbisiana root ash and tested its Conversion efficiency for conversion of waste cooking oil into methyl esters. It was observed that the catalyst is really effective for the production of biodiesel from even high Free Fatty Acid waste cooking oil. For optimization of production parameters authors have used ABO complemented with RSM to maximize the biodiesel production yield. The maximum biodiesel yield of 96.67% was achieved using ABO which is about 15% higher than provided by RSM which is 81.01%. The highest biodiesel yield of 96.67 % is obtained at 15:1 Molar Ratio with 3.5% catalyst wt. percent, 60 Degree C Temp. in 45 Minutes with an error of 2.5 % in yield prediction by ABO. The work may be utilized by industries and researchers to use ultrasonic reactors optimally to extract better biodiesel volume in very short time instead of presently used slow mechanical stirring tank reactors.

scholarly journals Optimization of Waste Cooking Oil’s FFA as Biodiesel Feedstock

Teknomekanik ◽  
2021 ◽  
Vol 4 (1) ◽  
pp. 14-21
Author(s):  
Sri Rizki Putri Primandari ◽  
Andril Arafat ◽  
Harumi Veny
Keyword(s):  
Irradiation Time ◽  
Control Variable ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Cooking Oil ◽  
Biodiesel Feedstock ◽  
Temperature Irradiation ◽  
Acid Esterification ◽  
Central Composite

Waste cooking oil has high Free Fatty Acid (FFA). It affected on decreasing a biodiesel production. FFA reduction is one of important processes in biodiesel production from waste cooking oil. Thus, this study aimed to examine the optimum condition in FFA reduction. The process is assisted by using ultrasonic irradiation on acid esterification. Variables of the process are acid concentration, molar ratio of methanol and oil, and irradiation time. Meanwhile temperature irradiation on 45oC is a control variable. Process optimization is conducted by Response Surface Methodology (RSM) with Central Composite Design (CCD). The optimum conditions of response were 7.22:1 (methanol to oil molar ratio), 0.92% wt H2SO4, 26.04 minutes (irradiation time), and 45oC (irradiation temperature). Ultrasonic system reduced FFA significantly compared to conventional method.

scholarly journals Evaluation of Shell-Derived Calcium Oxide Catalysts for the Production of Biodiesel Esters from Cooking Oils

2021 ◽  
pp. 20-27
Author(s):  
Ngee Sing Chong ◽  
Francis Uchenna Okejiri ◽  
Saidi Abdulramoni ◽  
Shruthi Perna ◽  
Beng Guat Ooi
Keyword(s):  
Calcium Oxide ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
X Ray ◽  
Cooking Oil ◽  
Biodiesel Synthesis ◽  
Cooking Oils ◽  
The Cost ◽  
Percentage Conversion

Due to the high cost of feedstock and catalyst in biodiesel production, the viability of the biodiesel industry has been dependent on government subsidies or tax incentives. In order to reduce the cost of production, food wastes including eggshells and oyster shells have been used to prepare calcium oxide (CaO) catalysts for the transesterification reaction of biodiesel synthesis. The shells were calcined at 1000 °C for 4 hours to obtain CaO powders which were investigated as catalysts for the transesterification of waste cooking oil. The catalysts were characterized by Fourier Transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray powder diffraction (XRD), and X-ray fluorescence (XRF) spectroscopy. Reaction parameters such as methanol-to-oil molar ratio, CaO catalyst concentration, and reaction time were evaluated and optimized for the percentage conversion of cooking oil to biodiesel esters. The oyster-based CaO showed better catalytic activity when compared to the eggshell-based CaO under the same set of reaction conditions.

Genetic Algorithm Approach to Optimize Biodiesel Production by Ultrasonic System

2014 ◽  
Vol 9 (1) ◽  
pp. 59-70 ◽  
Author(s):  
Ebrahim Fayyazi ◽  
Barat Ghobadian ◽  
Gholamhassan Najafi ◽  
Bahram Hosseinzadeh
Keyword(s):  
Genetic Algorithm ◽  
Catalyst Concentration ◽  
Ultrasonic Method ◽  
Research Work ◽  
Optimization Method ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Genetic Algorithm Approach ◽  
Mixing Method

Abstract Ultrasonic processing is an effective tool to attain required mixing while providing the necessary activation energy in the field of biofuels. In this regard, optimization of fast transesterification of waste cooking oil is very important. The goal of this research paper is therefore to determine the effect of important parameters such as methanol to oil molar ratio, catalyst concentration (potassium hydroxide), temperature, and horn position on oil conversion to methyl ester in ultrasonic mixing method. Result of experiments showed that the optimum conditions for the transesterification process have been obtained as molar ratio of alcohol to oil as 6:1, catalyst concentration of 1 wt.%, temperature as 45°C, and horn position at the interface of methanol to oil. The results show that the ultrasonic method decreases the reaction time as much as up to eight times compare to the conventional stirring. For practically evaluating the theoretical optimum point using genetic algorithm, the obtained values were verified experimentally. In order to perform this, the catalyst concentration, temperature, and the time of reaction were determined, and the values are 1%, 48°C, and 449s, respectively. For the obtained values, the biodiesel conversion was 93.2%, so that the experimental optimum value is closed to that of the theoretical values. As a result, experimental data confirmed the obtained values from optimization method in this research work.

Evaluation of the tribological properties and oxidative stability of epoxidized and ring opened products of pure rice bran oil

2020 ◽  
pp. 135065012095053
Author(s):  
Ananthan D Thampi ◽  
Abhishek R John ◽  
M Muhammed Arif ◽  
S Rani
Keyword(s):  
Hydrogen Peroxide ◽  
Vegetable Oils ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Research Work ◽  
Viscosity Index ◽  
Oxidation Stability ◽  
High Viscosity ◽  
Molar Ratio ◽  
Four Levels

Vegetable oils constitute a potential base stock for bio-lubricants, which has good biodegradability, high flash point, high viscosity index and excellent boundary lubrication properties. They also possess some limitations like low thermal and oxidation stability, poor low temperature properties and narrow range of viscosities. These limitations can be altered by modifying the vegetable oils chemically or by providing additives into the oils. This research work focused on the chemical modification of pure rice bran oil by epoxidation process using 30% hydrogen peroxide and glacial acetic acid. The epoxidized rice bran oil was then subjected to ring opening process using butanoic acid. The epoxidation process was optimized with four factors (Temperature, Time, Weight % of Catalyst, Hydrogen Peroxide molar ratio), each factors having four levels. The lubricant properties of pure rice bran oil (RBO), epoxidized rice bran oil (ERBO) and ring opened rice bran oil (RRBO) were studied. It was noted that the lubricant properties of ERBO and RRBO were better compared to pure RBO.

scholarly journals Waste cooking oil processing for fatty acid methyl ester and mono glycerides production with magnetite catalyst

Food Research ◽  
2020 ◽  
Vol 4 (S1) ◽  
pp. 220-226
Author(s):  
Widayat ◽  
Hadiyanto ◽  
D.A. Putra ◽  
Nursafitri I. ◽  
H. Satriadi ◽  
...  
Keyword(s):  
Acid Methyl Ester ◽  
Chemical Precipitation ◽  
Waste Cooking Oil ◽  
Acid Number ◽  
Biodiesel Production ◽  
National Standard ◽  
Molar Ratio ◽  
Oil Processing ◽  
Cooking Oil ◽  
Acid Methyl

The objective of this research was to produce biodiesel using waste cooking oil and various magnetite catalysts with the esterification-transesterification process. Magnetite catalysts tested were α- Fe2O3, α- Fe2O3/Al2O3, α- Fe2O3/ZSM-5 catalysts. Catalysts were prepared through chemical precipitation and calcination. The esterificationtransesterification process was carried out with the conditions WCO: methanol molar ratio of 15:1, catalyst (1% wt of oil), heated at 65℃ for 3 hrs. The results showed biodiesel production using α- Fe2O3-ZSM-5 catalyst obtained higher %FAME (83.28%), yield (91.915%) and monoglyceride content (16.72%) compared to others due to larger pore volume. Biodiesel produced passed the requirement of Indonesian National Standard (SNI) based on density, acid number and viscosity.

scholarly journals Sustainable Biodiesel Production from Waste Cooking Oil and Chicken Fat as an Alternative Fuel for Diesel Engine

2017 ◽  
Vol 13 (3) ◽  
pp. 235
Author(s):  
Ribwar K. Abdulrahman
Keyword(s):  
Global Warming ◽  
Greenhouse Gases ◽  
Fossil Fuels ◽  
Oil And Gas ◽  
Recent Decade ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Biodiesel Fuel ◽  
Chicken Fat ◽  
Cooking Oil

In recent decade, the demand for fuel as a source of energy has been dramatic. In fact, many oil and gas reservoirs are declining around the world. The use of fossil fuels such as oil, coal, and natural gas is contributing to the phenomenon of global warming. This is because it emits high quantities of carbon dioxide and other greenhouse gases to the atmosphere. Thus, many researchers and energy companies are investigating the production of an environmental friendly fuel that reduces the emission of greenhouse gases. Thus, bio fuel is one of the most obvious alternative sustainable fuels that can be produced from used vegetable oil and animal fats as well. Indeed, it has several advantages. For example, a biodegradable and a renewable energy reduces global warming phenomenon. Thus, this work is an attempt to produce a biodiesel fuel from chicken fat and waste cooking oil. Also, it was found that it is possible to produce biodiesel from chicken fat and waste cooking oils using transesterification reaction method. Furthermore, the process optimization was also adopted; for example, methanol to oil ratio. It has been found that the yield percentages of the produced biodiesel is increased by increasing the amount of methanol. In addition, the maximum conversion to ester could be achieved at methanol: oil ratio about 7:1. at 60 °C.

scholarly journals Surfactant Imprinting Hyperactivated Immobilized Lipase as Efficient Biocatalyst for Biodiesel Production from Waste Cooking Oil

Catalysts ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 914 ◽  
Author(s):  
Yang ◽  
Zhang
Keyword(s):  
Burkholderia Cepacia ◽  
Energy Demand ◽  
Immobilized Lipase ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Enzymatic Production ◽  
Burkholderia Cepacia Lipase ◽  
Cooking Oil ◽  
Highly Active

Enzymatic production of biodiesel from waste cooking oil (WCO) could contribute to resolving the problems of energy demand and environment pollutions.In the present work, Burkholderia cepacia lipase (BCL) was activated by surfactant imprinting, and subsequently immobilized in magnetic cross-linked enzyme aggregates (mCLEAs) with hydroxyapatite coated magnetic nanoparticles (HAP-coated MNPs). The maximum hyperactivation of BCL mCLEAs was observed in the pretreatment of BCL with 0.1 mM Triton X-100. The optimized Triton-activated BCL mCLEAs was used as a highly active and robust biocatalyst for biodiesel production from WCO, exhibiting significant increase in biodiesel yield and tolerance to methanol. The results indicated that surfactant imprinting integrating mCLEAs could fix BCL in their active (open) form, experiencing a boost in activity and allowing biodiesel production performed in solvent without further addition of water. A maximal biodiesel yield of 98% was achieved under optimized conditions with molar ratio of methanol-to-WCO 7:1 in one-time addition in hexane at 40 °C. Therefore, the present study displays a versatile method for lipase immobilization and shows great practical latency in renewable biodiesel production.

Biodiesel Production through Direct Transesterification of Waste Cooking Oil with Alcohol via Ultrasonic Wave

2013 ◽  
Vol 389 ◽  
pp. 12-16
Author(s):  
Yong Feng Kang ◽  
Hua Jin Shi ◽  
Lin Ge Yang ◽  
Jun Xia Kang ◽  
Zi Qi Zhao
Keyword(s):  
Reaction Time ◽  
Reaction Temperature ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Ultrasonic Power ◽  
Cooking Oil ◽  
Biodiesel Synthesis ◽  
Optimum Reaction ◽  
Ester Exchange Reaction

Biodiesel is prepared from waste cooking oil and methanol. The ester exchange reaction is conducted under ultrasonic conditions with alkali as the catalysts. Five factors influencing on the transesterification reaction of biodiesel production are discussed in this study, including the reaction time, reaction temperature, catalyst amount, methanol to oil molar ratio, ultrasonic power. A series of laboratory experiments were carried out to test the conversion of biodiesel under various conditions. The process of biodiesel production was optimized by application of orthogonal test obtain the optimum conditions for biodiesel synthesis. The results showed that the optimum reaction conditions were:molar ratio of oil to methanol 8:1,catalysts 1.2g KOH/100g oil,reaction temperature 70°C, reaction time 50 min,Ultrasonic power 400W. The conversion may up to 96.48%.

scholarly journals Study on Biodiesel Production and Characterization for Used Cooking Oil

2020 ◽  
pp. 76-86
Author(s):  
M. S. Dulawat ◽  
J. M. Makavana ◽  
S. V. Kelaiya ◽  
M. J. Gojiya ◽  
G. A. Gadhiya ◽  
...  
Keyword(s):  
Waste Cooking Oil ◽  
Diesel Oil ◽  
Environmental Benefits ◽  
Biodiesel Production ◽  
Biodiesel Fuel ◽  
Potential Candidate ◽  
Ample Evidence ◽  
Cooking Oil ◽  
Used Cooking Oil ◽  
The Cost

The increasing awareness of the depletion of fossil fuel resources and the environmental benefits of biodiesel fuel has made it more attractive in recent times. Its primary advantages deal with it being one of the most renewable fuels currently available and it is also non-toxic and biodegradable. It can also be used directly in most diesel engines without requiring extensive engine modifications. However, the cost of biodiesel is the major hurdle to its commercialization in comparison to petroleum-based diesel fuel. Biodiesel is proved to be a potential candidate for partial substitute of mineral diesel oil. The environmental issues associated with the use of fossil-based energy sources have informed the search for more sustainable energy alternatives. This work investigated the potential of producing biodiesel from waste cooking oil (WCO). The work gives ample evidence that oil from eateries in WCO could be used in producing high quality biodiesel in an easy, one-step transesterification reaction without the need for acid esterification which increases the overall cost of the production process.

Sign in / Sign up

Export Citation Format

Share Document