scholarly journals Waste glass as additive to clayey material in subgrade and embankment of road pavement

2012 ◽  
Vol 10 (2) ◽  
pp. 215-222 ◽  
Author(s):  
Nebojsa Davidovic ◽  
Zoran Bonic ◽  
Verka Prolovic
Keyword(s):  
Civil Engineering ◽  
Road Construction ◽  
Waste Glass ◽  
Clay Material ◽  
Road Pavement ◽  
Technical Requirements ◽  
Clayey Material ◽  
Intended Purpose ◽  
Geotechnical Tests ◽  
General Technical

In this paper the possibility of using waste glass in road construction is discussed. Samples of clay material with the addition of waste glass were subjected to a series of laboratory geotechnical tests performed at the Laboratory of Geotechnics at the Faculty of Civil Engineering and Architecture in Nis. The obtained results were compared with criteria defined in the document ?General technical requirements for road construction?. On this basis, the conclusions on the suitability of this mixture for the intended purpose are given.

CREDO RADON UA – INFORMATION MODEL FOR CALCULATION OF ROAD CONSTRACTION

2019 ◽  
pp. 34-42
Author(s):  
Volodymyr Karedin ◽  
Nadiya Pavlenko
Keyword(s):  
Design Process ◽  
Static Loading ◽  
Computer Aided Design ◽  
Experimental Studies ◽  
Construction Materials ◽  
Residual Deformation ◽  
Road Construction ◽  
Information Support ◽  
Existing Structures ◽  
Road Pavement

CREDO RADON UA software provides an automated calculation of the strength of the pavement structures of non-rigid and rigid types, as well as the calculation of the strengthening of existing structures. In the article, one can see the main features and functionality of the CREDO RADON UA software, the main points in the calculations according to the new regulations. Information support of the design process includes necessary databases, informational and helping materials that make up the full support of the pavement design process. The concept of CREDO RADON UA 1.0 software is made on the use of elasticity theory methods in calculations of initial information models of pavements. Performing optimization calculations, the roadwear in CREDO RADON UA is designed in such a way that no unacceptable residual deformation occurs under the influence of short-term dynamic or static loading in the working layer of the earth bed and in the structural layers during the lifetime of the structure. The calculation algorithms were made in accordance with the current regulatory documents of Ukraine. CREDO RADON UA software allows user to create information bases on road construction materials and vehicles as part of the traffic flow for calculations. The presented system of automated modeling makes it easier for the customer to control the quality of design solutions, to reasonably assign designs to layers of reinforcement, to quickly make comparisons of calculations of different designs for the optimal use of allocated funds. Prospects for further improvement of the program should be the results of theoretical and experimental studies on filling the databases, which are used as information support for automated design of road structures. Keywords: CREDO RADON UA, road, computer-aided design, repair project, road pavement, strengthening, construction, rigid pavement, elasticity module, a transport stream, calculation method, information support, dynamic or static loading.

Bitumen-Mineral Compositions for Road Construction with the Use of Household Waste Glass (Cullet)

2019 ◽  
Vol 770 (5) ◽  
pp. 51-56
Author(s):  
Yu.G. BORISENKO ◽  
◽  
R.M. AZAN ◽  
D.P. SHVACHEV ◽  
D.A. VOROBIEV ◽  
...  
Keyword(s):  
Road Construction ◽  
Waste Glass ◽  
Household Waste ◽  
Glass Cullet ◽  
Mineral Compositions

scholarly journals Research on the Properties of Mineral–Cement Emulsion Mixtures Using Recycled Road Pavement Materials

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 563
Author(s):  
Łukasz Skotnicki ◽  
Jarosław Kuźniewski ◽  
Antoni Szydło
Keyword(s):  
Road Construction ◽  
Base Layer ◽  
Asphalt Emulsion ◽  
Reclaimed Asphalt ◽  
Pavement Materials ◽  
Road Pavement ◽  
Road Surfaces ◽  
Cement Binder ◽  
Pavement Structures ◽  
By Products

The reduction in natural resources and aspects of environmental protection necessitate alternative uses of waste materials in the area of construction. Recycling is also observed in road construction where mineral–cement emulsion (MCE) mixtures are applied. The MCE mix is a conglomerate that can be used to make the base layer in road pavement structures. MCE mixes contain reclaimed asphalt from old, degraded road surfaces, aggregate improving the gradation, asphalt emulsion, and cement as a binder. The use of these ingredients, especially cement, can cause shrinkage and cracks in road layers. The article presents selected issues related to the problem of cracking in MCE mixtures. The authors of the study focused on reducing the cracking phenomenon in MCE mixes by using an innovative cement binder with recycled materials. The innovative cement binder based on dusty by-products from cement plants also contributes to the optimization of the recycling process in road surfaces. The research was carried out in the field of stiffness, fatigue life, crack resistance, and shrinkage analysis of mineral–cement emulsion mixes. It was found that it was possible to reduce the stiffness and the cracking in MCE mixes. The use of innovative binders will positively affect the durability of road pavements.

Use of soils and recycled industrial products treated with water glass in the road pavement base courses

2021 ◽  
Vol 2021 ◽  
pp. 86-93
Author(s):  
Anatolii Mudrychenko ◽  
◽  
Andrii Hrinchuk ◽  
Ivan Balashov ◽  
Sergey Illyasch ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Sodium Silicate ◽  
Water Glass ◽  
Water Solution ◽  
Road Construction ◽  
The Road ◽  
Road Pavement ◽  
Stone Materials ◽  
Pavement Base ◽  
Local Materials

Introduction. Growing volumes of road construction increase the need to expand and rationally use of raw materials. The need for stone materials can be solved through the wide spread using of local materials, recycled products of industry in the pavement base courses and decreasing the use of natural construction materials by replacing them with alternatives, including soils, slag materials that are metallurgical industry wastes. Experience of ferrous metallurgy slag usage has been accumulated in the road industry of Ukraine. Their usage makes it possible to extend the construction season, increases the strength and reliability of road structures due to their physical and mechanical properties, significantly reduces the road pavement energy consumption, simplifying the technology of works and the estimated cost of road construction. It was determined that the layers of pavement made from blast furnace slag have a high bearing capacity. Slag structures in 5–10 years of hardening are not inferior to, and in 10–20 years surpass cement structures on durability and deformation resistance. However, there is an urgent need to provide strength and open road traffic on the already built road section in a shortest possible term, so there is a need to accelerate the activation of the slow-setting binder. Therefore water glass (water solution of sodium silicate) is used.Purpose. The purpose of the work is to study the feasibility of using the soils and recycled industry products treated with water glass in the road pavement base courses.Materials and methods. Experimental tests of soils and blast furnace slags treated with water glass with different content of water solution of sodium silicate were performed.Results. The feasibility of using the asphalt concrete mixtures on the basis of soils and recycled products of industry treated with water glass in the pavement base courses is determined. Recommendations regarding technological parameters of preparation, transportation, laying and compaction of such mixes are given.Conclusions. Performed studies have shown that the physical and mechanical parameters of soils and blast furnace slags treated with water glass meet the requirements of current regulations of Ukraine. The advantages of use are noted, namely: the possibility of replacement of traditional stone materials by the local materials and recycled products of industry, reducing the transport component in the cost of construction. The obtained results indicate the feasibility of using the soils and recycled products of industry treated with water glass in the road construction.Keywords: soils, recycled products of industry, graded blast furnace slag, water solution of sodium silicate, water glass

scholarly journals GENERAL TECHNICAL ISSUES AS TO INTRODUCTION OF ILLUMINATING AND ORIENTING AND LIGHTING FIRE EQUIPMENT

2018 ◽  
Vol 1 (2) ◽  
pp. 37-42
Author(s):  
O Тymoshenko ◽  
O Borys ◽  
T Skorobahatko
Keyword(s):  
Light Flux ◽  
Test Methods ◽  
Technical Committee ◽  
Performance Standard ◽  
Light Power ◽  
Power Sources ◽  
Technical Requirements ◽  
Technical Specifications ◽  
Conducting Research ◽  
General Technical

The issue of the necessity of developing state standards in the sphere of illuminating and orienting and lighting fire equipment in Ukraine as for classification and general requirements in general and general technical requirements and methods of fire-rescuer lantern tests, in particular, are considered. The main provisions of these standards, which are developed in the Ukrainian Civil Protection Research Institute (UkrCPRI) and on the recommendation of the Standardization Technical Committee of Ukraine TC 25 "Fire safety and fire protection equipment" are outlined and have been earlier introduced to the Program of works for the national standardization for the year of 2018. The application of the basic provisions of these standards will contribute to the introduction of the leading world scientific and technological achievements in Ukraine in the development and production of illuminating and orienting and lighting fire equipment in general, and in particular testing of purchased foreign lanterns for compliance with standardized technical requirements, which will allow more objectively evaluate and compare their technical specifications. In this case, the results of the testing of some test methods and test equipment are presented, according to ANSI/NEMA FL1-2009 Flashlight Basic Performance Standard, when conducting research in UkrCPRI of the best world models of lanterns equipped with modern LED sources of light, power sources, electronics, etc., in particular two fire-rescuer lanterns: Peli 3765 LED (USA) and Vantage®180 (USA), a group fire lantern VULCAN® LED ATEX LANTERN (USA), which are currently supplied domestic fire trucks ООО «VК «Pozhmashyna» and experimental model of  personnel fire lantern developed in UkrCPRI. The specified test methods apply to the following basic lighting technology characteristics of the lantern, such as: light flux, peak power of light and duration of operation of the lantern, useful range of light beam.

scholarly journals STUDI PERENCANAAN TEBAL PERKERASAN KONSTRUKSI JALAN RAYA (MENGGUNAKAN METODE BINA MARGA) PADA RUAS JALAN UMASUKAER DI KABUPATEN MALAKA

2019 ◽  
Vol 2 (1) ◽  
pp. 75
Author(s):  
Philipus Resato Nahak ◽  
Yosef Cahyo ◽  
Sigit Winarto
Keyword(s):  
Road Construction ◽  
Traffic Volume ◽  
Traffic Density ◽  
The Road ◽  
Technical Requirements ◽  
Road Section ◽  
Road Capacity ◽  
Data Survey ◽  
Pavement Thickness

The increase in traffic volume will cause a decrease in service due to decreased road capacity due to an increase in side constraints and due to the increase in traffic volume itself, which will ultimately cause the level of road saturation to increase. The situation occurred in the Umasukaer road section of the Malacca Regency. Therefore it is necessary to address improvements in the quality of the road in order to meet the feasibility of transportation facilities by taking into account the existing technical requirements. The results of planning found that through the 2015 LHR survey data with a prediction of an increase in traffic density of 6% per year, the LHR was obtained with a planned age of 7 years = 2540.7 vehicles/day/department and a 20-year plan life LHR = 5419.1 ked/day / major. The results of a gradual construction planning pavement study can be concluded that the planning model that has been designed is effective in strengthening road construction in accordance with existing technical requirements and efficient in terms of financing. The final results of gradual construction pavement thickness results are: Ashburton thickness (MS 744) = 8 cm, Ashburton (MS 744) = 13 cm, broken stone (CBR 100) = 20 cm, Sirtu (CBR 50) = 10 cm and CBR subgrade 5%. Pertambahan volume lalu lintas akan menyebabkan penurunan layanan diakibatkan menurunnya kapasitas jalan karena adanya peningkatan hambatan samping maupun karena beratambahnya volume lalu lintas itu sendiri yang pada akhirnya akan meyebabkan tingkat kejenuhan jalan meningkat. Keadaan tersebut terjadi ruas jalan Umasukaer Kabupaten Malaka, oleh karena itu perlu adanya penanganan perbaikan kualitas jalan agar memenuhi segi kelayakan sarana transportasi dengan memperhatikan syarat-syarat teknik yang ada. Hasil perencanaan didapatkan bahwa melalui data survey LHR tahun 2015 dengan prediksi peningkatan kepadatan lalu lintas sebesar 6% pertahun maka didapatkan LHR dengan umur rencana 7 tahun = 2540,7 kend/hr/jurusan dan LHR umur rencana 20 tahun = 5419,1 ked/hr/jurusan. Hasil studi perencanaan perkerasan konstruksi bertahap dapat diambil kesimpulan bahwa model perencaaan yang telah dirancang efektif dalam memperkerasa konstruksi jalan sesuai dengan syarat teknis yang ada serta efisien dalam hal pembiayaan. Hasil akhir tebal perkerasan konstruksi bertahap diperoleh hasil: Ketebalan Asbuton (MS 744) = 8 cm, Asbuton (MS 744) = 13 cm, batu pecah (CBR 100) = 20 cm, Sirtu (CBR 50) = 10 cm dan CBR tanah dasar 5%.

Sign in / Sign up

Export Citation Format

Share Document