scholarly journals Effect of Ti and B additions as powder and preliminary alloy with Al-Si alloy on microstructure and mechanical properties of AlSi9Mg alloy intended for parts of agricultural machinery

2020 ◽  
Author(s):  
Tomasz Lipinski ◽  
Dariusz Karpisz
Keyword(s):  
Mechanical Properties ◽  
Agricultural Machinery ◽  
Microstructure And Mechanical Properties ◽  
B Additions

Effects of Sr and B addition on microstructure and mechanical properties of AZ91 magnesium alloy

2007 ◽  
Vol 22 (9) ◽  
pp. 2423-2428 ◽  
Author(s):  
H.L. Zhao ◽  
S.K. Guan ◽  
F.Y. Zheng
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Tensile Strength ◽  
Az91 Alloy ◽  
Az91 Magnesium Alloy ◽  
Solidification Range ◽  
Microstructure And Mechanical Properties ◽  
Average Grain Size ◽  
B Additions ◽  
Az91 Magnesium

The effects of Sr and B addition on the microstructure and mechanical properties of AZ91 alloy were studied. The results of this work show that a small amount of Sr addition to AZ91 refined the grain size. The highest tensile strength was obtained from the alloy with the optimal composition of 0.5% Sr and 0.09% B added, in which the average grain size was 42 μm. The tensile strength and elongation of the AZ91–0.5%Sr–0.09%B alloy were 151 MPa and 1.62%, respectively. Some needle-shaped Al4Sr particles distributed mainly at grain boundaries have been observed in the alloys with Sr and B additions. The fluidity is improved significantly, and the solidification range decreased by adding Sr and B. The liquidus of AZ91 alloy decreased markedly with the addition of Sr and B, but the solidus hardly changed. Therefore, the solidification range can be decreased, which will improve the die-casting properties.

Sign in / Sign up

Export Citation Format

Share Document