MHD stirring of liquid metal in crucibles with circular and square cross sections under rotating magnetic field

2018 ◽  
Vol 54 (3) ◽  
pp. 277-286
2014 ◽  
Vol 753 ◽  
pp. 472-498 ◽  
Author(s):  
Tobias Vogt ◽  
Dirk Räbiger ◽  
Sven Eckert

AbstractThe dynamics of free and forced inertial waves inside cylinders of different aspect ratios ($\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}A=H_0/2R_0$) were investigated experimentally in this study. The liquid metal GaInSn was chosen as the fluid in order to enable a contactless stimulation of the flow by means of alternating electromagnetic fields. A rotating magnetic field generates the rotating motion of the liquid, whereas periodic modulations of the field strength and short pulses excite specific wave modes. Ultrasound Doppler velocimetry was used to record the flow structure and to identify inertial waves in the set-up. Our experiments demonstrate selective excitation of different inertial wave modes by deliberate variation of the magnetic field parameters. Furthermore, it was found that turbulent perturbations in the boundary layers of the swirling flow are able to induce an inertial wave mode that survives over a long time. Experiments at the fundamental resonance have shown that multiple harmonic wave modes appeared simultaneously. The measured inertial wave frequencies were compared to the predictions of the linear inviscid theory.


2019 ◽  
Vol 9 (7) ◽  
pp. 1421 ◽  
Author(s):  
Jian Shu ◽  
Shi-Yang Tang ◽  
Sizepeng Zhao ◽  
Zhihua Feng ◽  
Haoyao Chen ◽  
...  

The self-rotation of liquid metal droplets (LMDs) has garnered potential for numerous applications, such as chip cooling, fluid mixture, and robotics. However, the controllable self-rotation of LMDs utilizing magnetic fields is still underexplored. Here, we report a novel method to induce self-rotation of LMDs solely utilizing a rotating magnetic field. This is achieved by rotating a pair of permanent magnets around a LMD located at the magnetic field center. The LMD experiences Lorenz force generated by the relative motion between the droplet and the permanent magnets and can be rotated. Remarkably, unlike the actuation induced by electrochemistry, the rotational motion of the droplet induced by magnetic fields avoids the generation of gas bubbles and behaves smoothly and steadily. We investigate the main parameters that affect the self-rotational behaviors of LMDs and validate the theory of this approach. We further demonstrate the ability of accelerating cooling and a mixer enabled by the self-rotation of a LMD. We believe that the presented technique can be conveniently adapted by other systems after necessary modifications and enables new progress in microfluidics, microelectromechanical (MEMS) applications, and micro robotics.


2001 ◽  
Vol 436 ◽  
pp. 131-143 ◽  
Author(s):  
L. MARTIN WITKOWSKI ◽  
P. MARTY ◽  
J. S. WALKER

A liquid-metal flow driven by a rotating magnetic field in a finite-length cylinder is studied numerically as a function of the field frequency. In the high-frequency case, the magnetic field is expelled from the liquid-metal except in a skin-depth layer along the side and top walls of the cylinder. In the corner region, where the skin-depth layers intersect, the body force exhibits a large positive and negative azimuthal component as well as inward radial and axial components which are rotational. The flows for various frequencies are compared to the low-frequency flow.


2010 ◽  
Vol 649 ◽  
pp. 263-268 ◽  
Author(s):  
Jenő Kovács ◽  
Arnold Rónaföldi ◽  
András Roósz

The topic of this paper is the unidirectional solidification of ternary Al7Si0.6Mg aluminium alloy in a rotating magnetic field of 30 -150 mT and the characterisation of effect of stirring on the solidified structure. During performing the experiment-series, one of the three solidification parameters (temperature gradient, solid/liquid interface velocity and magnetic induction) was continuously changed and the other two of them was kept on a constant value. The effect of these parameters on the developed structures was analysed during the evaluation of the experimental results. Moreover, the extent of Si-macrosegregation as well as the change of the secondary dendrite arm spacing were investigated on the longitudinal and cross-sections of samples as a function of the three basic parameters.


2012 ◽  
Vol 339 (1) ◽  
pp. 52-60 ◽  
Author(s):  
V. Travnikov ◽  
K. Eckert ◽  
P.A. Nikrityuk ◽  
S. Odenbach ◽  
T. Vogt ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document