scholarly journals Modeling the Permanent Deformation Behavior of Asphalt Mixtures Using a Novel Hybrid Computational Intelligence

2016 ◽  
Author(s):  
Min-Yuan Cheng ◽  
Doddy Prayogo
Keyword(s):  
Computational Intelligence ◽  
Deformation Behavior ◽  
Permanent Deformation ◽  
Asphalt Mixtures

scholarly journals Effects of Aggregate Mesostructure on Permanent Deformation of Asphalt Mixture Using Three-Dimensional Discrete Element Modeling

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3601 ◽  
Author(s):  
Deyu Zhang ◽  
Linhao Gu ◽  
Junqing Zhu
Keyword(s):  
Surface Texture ◽  
Deformation Behavior ◽  
Negative Impact ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Three Dimensional ◽  
Vertical Direction ◽  
Discrete Element ◽  
Asphalt Mixtures ◽  
Creep Tests

This paper investigated the effects of aggregate mesostructures on permanent deformation behavior of an asphalt mixture using the three-dimensional (3D) discrete element method (DEM). A 3D discrete element (DE) model of an asphalt mixture composed of coarse aggregates, asphalt mastic, and air voids was developed. Mesomechanical models representing the interactions among the components of asphalt mixture were assigned. Based on the mesomechanical modeling, the uniaxial static load creep tests were simulated using the prepared models, and effects of aggregate angularity, orientation, surface texture, and distribution on the permanent deformation behavior of the asphalt mixtures were analyzed. It was proven that good aggregate angularity had a positive effect on the permanent deformation performance of the asphalt mixtures, especially when approximate cubic aggregates were used. Aggregate packing was more stable when the aggregate orientations tended to be horizontal, which improved the permanent deformation performance of the asphalt mixture. The influence of orientations of 4.75 mm size aggregates on the permanent deformation behavior of the asphalt mixture was significant. Use of aggregates with good surface texture benefitted the permanent deformation performance of the asphalt mixture. Additionally, the non-uniform distribution of aggregates had a negative impact on the permanent deformation performance of the asphalt mixtures, especially when aggregates were distributed non-uniformly in the vertical direction.

Effect of aggregate gradation on permanent deformation behavior of a warm mix asphalt

2016 ◽  
Vol 58 (7-8) ◽  
pp. 678-688 ◽  
Author(s):  
Ebrahim Sangsefidi ◽  
Ali Mansourkhaki ◽  
Hasan Ziari
Keyword(s):  
Deformation Behavior ◽  
Permanent Deformation ◽  
Warm Mix Asphalt ◽  
Aggregate Gradation

Permanent Deformation Behavior of Naturally Occurring Bituminous Sands

2008 ◽  
Vol 2059 (1) ◽  
pp. 31-40 ◽  
Author(s):  
Joseph Anochie-Boateng ◽  
Erol Tutumluer ◽  
Samuel H. Carpenter
Keyword(s):  
Deformation Behavior ◽  
Permanent Deformation ◽  
Naturally Occurring

scholarly journals Performance Evaluation of WMA Containing Re-Refined Acidic Sludge and Amorphous Poly Alpha Olefin (APAO)

2021 ◽  
Vol 13 (6) ◽  
pp. 3315
Author(s):  
Mansour Fakhri ◽  
Danial Arzjani ◽  
Pooyan Ayar ◽  
Maede Mottaghi ◽  
Nima Arzjani
Keyword(s):  
Resilient Modulus ◽  
Permanent Deformation ◽  
Road Construction ◽  
Moisture Damage ◽  
Asphalt Mixtures ◽  
Modified Bitumen ◽  
Alternative Source ◽  
The Road ◽  
Marshall Test ◽  
Alpha Olefin

The use of waste materials has been increasingly conceived as a sustainable alternative to conventional materials in the road construction industry, as concerns have arisen from the uncontrolled exploitation of natural resources in recent years. Re-refined acidic sludge (RAS) obtained from a waste material—acidic sludge—is an alternative source for bitumen. This study’s primary purpose is to evaluate the resistance of warm mix asphalt (WMA) mixtures containing RAS and a polymeric additive against moisture damage and rutting. The modified bitumen studied in this research is a mixture of virgin bitumen 60/70, RAS (10, 20, and 30%), and amorphous poly alpha olefin (APAO) polymer. To this end, Marshall test, moisture susceptibility tests (i.e., tensile strength ratio (TSR), residual Marshall, and Texas boiling water), resilient modulus, and rutting assessment tests (i.e., dynamic creep, Marshall quotient, and Kim) were carried out. The results showed superior values for modified mixtures compared to the control mix considering the Marshall test. Moreover, the probability of a reduction in mixes’ moisture damage was proved by moisture sensitivity tests. The results showed that modified mixtures could improve asphalt mixtures’ permanent deformation resistance and its resilience modulus. Asphalt mixtures containing 20% RAS (substitute for bitumen) showed a better performance in all the experiments among the samples tested.

scholarly journals Effect of Rubberized Bitumen Blending Methods on Permanent Deformation of SMA Rubberized Asphalt Mixtures

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Herda Yati Katman ◽  
Mohd Rasdan Ibrahim ◽  
Mohamed Rehan Karim ◽  
Suhana Koting ◽  
Nuha Salim Mashaan
Keyword(s):  
Creep Behaviour ◽  
Permanent Deformation ◽  
Asphalt Mixtures ◽  
Creep Model ◽  
Materials Testing ◽  
Wet Process ◽  
Test Conditions ◽  
Dynamic Creep ◽  
Different Temperatures ◽  
Stone Mastic Asphalt

This study aims at comparing the permanent deformation of Stone Mastic Asphalt (SMA) rubberized asphalt mixtures produced by the wet process. In this study, rubberized binders were prepared using two different blending methods, namely, continuous blend and terminal blend. To study the creep behaviour of control and rubberized asphalt mixtures, the dynamic creep test was performed using Universal Materials Testing Apparatus (UMATTA) at different temperatures and stress levels. Zhou three-stage creep model was utilized to evaluate the deformation characteristics of the mixtures. In all test conditions, the highest resistance to permanent deformation is showed by the rubberized mixtures produced with continuous blend binders. This study also reveals that the permanent deformation of rubberized mixtures cannot be predicted based on the characteristics of the rubberized binders.

Use of Superpave Technology for Design and Construction of Rubberized Asphalt Mixtures

1997 ◽  
Vol 1583 (1) ◽  
pp. 71-81 ◽  
Author(s):  
H. Barry Takallou ◽  
Hussain U. Bahia ◽  
Dario Perdomo ◽  
Robert Schwartz
Keyword(s):  
Fatigue Behavior ◽  
Permanent Deformation ◽  
Performance Testing ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Mix Design ◽  
Asphalt Rubber ◽  
Constant Height ◽  
Overlay Design ◽  
Gyratory Compaction

The effect of different mixing times and mixing temperatures on the performance of asphalt-rubber binder was evaluated. Four different types of asphalt-rubber binders and neat asphalt were characterized using the Strategic Highway Research Program (SHRP) binder method tests. Subsequently, mix designs were carried out using both the SHRP Levels I and II mix design procedures, as well as the traditional Marshall mix design scheme. Additionally, performance testing was carried out on the mixtures using the Superpave repetitive simple shear test at constant height (RSST-CH) to evaluate the resistance to permanent deformation (rutting) of the rubberized asphalt mixtures. Also, six rectangular beams were subjected to repeated bending in the fatigue tester at different microstrain levels to establish rubberized asphalt mixtures’ resistance to fatigue cracking under repeated loadings. The results indicate that the Superpave mix design produced asphalt-rubber contents that are significantly higher than values used successfully in the field. Marshall-used gyratory compaction could not produce the same densification trends. Superpave mixture analysis testing (Level II) was used successfully for rubberized asphalt mixtures. Results clearly indicated that the mixture selected exhibited acceptable rutting and fatigue behavior for typical new construction and for overlay design. Few problems were encountered in running the Superpave models. The results of the RSST-CH indicate that rubber-modified asphalt concrete meets the criteria for a maximum rut depth of 0.5 in.; and more consistent results were measured for fatigue performance analysis using the repeated four-point bending beam testing (Superpave optional torture testing). The cycles to failure were approximately 26,000 at 600 microstrain.

Sign in / Sign up

Export Citation Format

Share Document