scholarly journals Analisis Penempatan Node Sensor Terhadap Jarak Pengambilan Data Pada Media Tanah

2019 ◽  
Vol 9 (1) ◽  
pp. 55
Author(s):  
Rahman Faisal ◽  
Roghib Muhammad Hujja
Keyword(s):  
Data Transmission ◽  
Sensor Nodes ◽  
Sensor Data ◽  
Wireless Sensor ◽  
Soil Composition ◽  
Soil Material ◽  
Average Percentage ◽  
Transmission Distance ◽  
Depth Increase ◽  
Sensor Node Placement

Badan Nasional Penanggulangan Bencana (BNPB) describes the number of casualties, property and environment resulting from landslides. Wireless sensor network technology can minimize the loss of life, property and environment [1, 2]. Wireless sensor networks are prone to interference, especially in data transmission. Transmission of wireless sensor data can be disrupted if material is blocked. Slides that are easily landslide in Indonesia consist mainly of soil material [3]. Soil is one material that can interfere with wireless sensor data transmission and is influenced by aspects such as temperature, weather, soil composition, soil moisture, and soil homogeneity [4, 5]. This study focuses on analyzing the effect of sensor node placement on data transmission distance on WiFi-based soil material. The results of the analysis of the placement of sensor nodes planted in the ground resulted in an average percentage attenuation of signal strength every 5 cm depth increase in soil material was 4.90%.

scholarly journals A Data-Based Fault-Detection Model for Wireless Sensor Networks

2019 ◽  
Vol 11 (21) ◽  
pp. 6171 ◽  
Author(s):  
Jangsik Bae ◽  
Meonghun Lee ◽  
Changsun Shin
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Fault Detection ◽  
Data Transmission ◽  
Sensor Node ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Sensors And Actuators ◽  
Detection Model ◽  
Management Platform

With the expansion of smart agriculture, wireless sensor networks are being increasingly applied. These networks collect environmental information, such as temperature, humidity, and CO2 rates. However, if a faulty sensor node operates continuously in the network, unnecessary data transmission adversely impacts the network. Accordingly, a data-based fault-detection algorithm was implemented in this study to analyze data of sensor nodes and determine faults, to prevent the corresponding nodes from transmitting data; thus, minimizing damage to the network. A cloud-based “farm as a service” optimized for smart farms was implemented as an example, and resource management of sensors and actuators was provided using the oneM2M common platform. The effectiveness of the proposed fault-detection model was verified on an integrated management platform based on the Internet of Things by collecting and analyzing data. The results confirm that when a faulty sensor node is not separated from the network, unnecessary data transmission of other sensor nodes occurs due to continuous abnormal data transmission; thus, increasing energy consumption and reducing the network lifetime.

scholarly journals Anomaly Detection in Medical Wireless Sensor Networks using SVM and Linear Regression Models

2014 ◽  
Vol 5 (1) ◽  
pp. 20-45 ◽  
Author(s):  
Osman Salem ◽  
Alexey Guerassimov ◽  
Ahmed Mehaoua ◽  
Anthony Marcus ◽  
Borko Furht
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Anomaly Detection ◽  
Patient Data ◽  
Sensor Nodes ◽  
Sensor Data ◽  
Wireless Sensor ◽  
Smart Devices ◽  
Support Vector ◽  
Processing Unit

This paper details the architecture and describes the preliminary experimentation with the proposed framework for anomaly detection in medical wireless body area networks for ubiquitous patient and healthcare monitoring. The architecture integrates novel data mining and machine learning algorithms with modern sensor fusion techniques. Knowing wireless sensor networks are prone to failures resulting from their limitations (i.e. limited energy resources and computational power), using this framework, the authors can distinguish between irregular variations in the physiological parameters of the monitored patient and faulty sensor data, to ensure reliable operations and real time global monitoring from smart devices. Sensor nodes are used to measure characteristics of the patient and the sensed data is stored on the local processing unit. Authorized users may access this patient data remotely as long as they maintain connectivity with their application enabled smart device. Anomalous or faulty measurement data resulting from damaged sensor nodes or caused by malicious external parties may lead to misdiagnosis or even death for patients. The authors' application uses a Support Vector Machine to classify abnormal instances in the incoming sensor data. If found, the authors apply a periodically rebuilt, regressive prediction model to the abnormal instance and determine if the patient is entering a critical state or if a sensor is reporting faulty readings. Using real patient data in our experiments, the results validate the robustness of our proposed framework. The authors further discuss the experimental analysis with the proposed approach which shows that it is quickly able to identify sensor anomalies and compared with several other algorithms, it maintains a higher true positive and lower false negative rate.

scholarly journals Time-selective data fusion for in-network processing in ad hoc wireless sensor networks

2018 ◽  
Vol 14 (11) ◽  
pp. 155014771881130 ◽  
Author(s):  
Jaanus Kaugerand ◽  
Johannes Ehala ◽  
Leo Mõtus ◽  
Jürgo-Sören Preden
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Data Fusion ◽  
Data Streams ◽  
Ad Hoc ◽  
Sensor Nodes ◽  
Sensor Data ◽  
Wireless Sensor ◽  
Temporal Consistency ◽  
Variable Delays

This article introduces a time-selective strategy for enhancing temporal consistency of input data for multi-sensor data fusion for in-network data processing in ad hoc wireless sensor networks. Detecting and handling complex time-variable (real-time) situations require methodical consideration of temporal aspects, especially in ad hoc wireless sensor network with distributed asynchronous and autonomous nodes. For example, assigning processing intervals of network nodes, defining validity and simultaneity requirements for data items, determining the size of memory required for buffering the data streams produced by ad hoc nodes and other relevant aspects. The data streams produced periodically and sometimes intermittently by sensor nodes arrive to the fusion nodes with variable delays, which results in sporadic temporal order of inputs. Using data from individual nodes in the order of arrival (i.e. freshest data first) does not, in all cases, yield the optimal results in terms of data temporal consistency and fusion accuracy. We propose time-selective data fusion strategy, which combines temporal alignment, temporal constraints and a method for computing delay of sensor readings, to allow fusion node to select the temporally compatible data from received streams. A real-world experiment (moving vehicles in urban environment) for validation of the strategy demonstrates significant improvement of the accuracy of fusion results.

scholarly journals Energy-efficient hierarchical routing in wireless sensor networks based on Fog Computing

2020 ◽  
Author(s):  
Ademola Abidoye ◽  
Boniface Kabaso
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Data Transmission ◽  
Energy Efficient ◽  
Fog Computing ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Hierarchical Routing

Abstract Wireless sensor networks (WSNs) have been recognized as one of the most essential technologies of the 21st century. The applications of WSNs are rapidly increasing in almost every sector because they can be deployed in areas where cable and power supply are difficult to use. In the literature, different methods have been proposed to minimize energy consumption of sensor nodes so as to prolong WSNs utilization. In this article, we propose an efficient routing protocol for data transmission in WSNs; it is called Energy-Efficient Hierarchical routing protocol for wireless sensor networks based on Fog Computing (EEHFC). Fog computing is integrated into the proposed scheme due to its capability to optimize the limited power source of WSNs and its ability to scale up to the requirements of the Internet of Things applications. In addition, we propose an improved ant colony optimization (ACO) algorithm that can be used to construct optimal path for efficient data transmission for sensor nodes. The performance of the proposed scheme is evaluated in comparison with P-SEP, EDCF, and RABACO schemes. The results of the simulations show that the proposed approach can minimize sensor nodes’ energy consumption, data packet losses and extends the network lifetime

scholarly journals Performance Analysis of Q-Leach Algorithm in WSN

2020 ◽  
Vol 5 (10) ◽  
pp. 1-4
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Data Transmission ◽  
Short Range ◽  
Sensor Node ◽  
Life Time ◽  
Time Span ◽  
Sensor Nodes ◽  
Wireless Sensor

Sensor nodes are exceedingly energy compelled instrument, since it is battery operated instruments. In wsn network, every node is liable to the data transmission through the wireless mode [1]. Wireless sensor networks (WSN) is made of a huge no. of small nodes with confined functionality. The essential theme of the wireless sensor network is energy helpless and the WSN is collection of sensor. Every sensor terminal is liable to sensing, store and information clan and send it forwards into sink. The communication within the node is done via wireless network [3].Energy efficiency is the main concentration of a desining the better routing protocol. LEACH is a protocol. This is appropriate for short range network, since imagine that whole sensor node is capable of communication with inter alia and efficient to access sink node, which is not always correct for a big network. Hence, coverage is a problem which we attempt to resolve [6]. The main focus within wireless sensor networks is to increase the network life-time span as much as possible, so that resources can be utilizes efficiently and optimally. Various approaches which are based on the clustering are very much optimal in functionality. Life-time of the network is always connected with sensor node’s energy implemented at distant regions for stable and defect bearable observation [10].

Applications of Wireless Sensor Networks

2010 ◽  
pp. 1076-1090 ◽  
Author(s):  
Corinna Schmitt ◽  
Georg Carle
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Large Scale ◽  
Sensor Nodes ◽  
Sensor Data ◽  
Wireless Sensor ◽  
Radio Communication ◽  
Power Resources ◽  
Limited Power

Today the researchers want to collect as much data as possible from different locations for monitoring reasons. In this context large-scale wireless sensor networks are becoming an active topic of research (Kahn1999). Because of the different locations and environments in which these sensor networks can be used, specific requirements for the hardware apply. The hardware of the sensor nodes must be robust, provide sufficient storage and communication capabilities, and get along with limited power resources. Sensor nodes such as the Berkeley-Mote Family (Polastre2006, Schmitt2006) are capable of meeting these requirements. These sensor nodes are small and light devices with radio communication and the capability for collecting sensor data. In this chapter the authors review the key elements for sensor networks and give an overview on possible applications in the field of monitoring.

Sensor Data Geographic Forwarding in Two-Dimensional and Three-Dimensional Spaces

2017 ◽  
pp. 317-352
Author(s):  
Habib M. Ammari ◽  
Amer Ahmed
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Three Dimensional ◽  
Geographic Routing ◽  
Sensor Nodes ◽  
Sensor Data ◽  
Wireless Sensor ◽  
Two Dimensional ◽  
Geographic Forwarding ◽  
Limited Power

A wireless sensor network is a collection of sensor nodes that have the ability to sense phenomena in a given environment and collect data, perform computation on the gathered data, and transmit (or forward) it to their destination. Unfortunately, these sensor nodes have limited power, computational, and storage capabilities. These factors have an influence on the design of wireless sensor networks and make it more challenging. In order to overcome these limitations, various power management techniques and energy-efficient protocols have been designed. Among such techniques and protocols, geographic routing is one of the most efficient ways to solve some of the design issues. Geographic routing in wireless sensor networks uses location information of the sensor nodes to define a path from source to destination without having to build a network topology. In this paper, we present a survey of the existing geographic routing techniques both in two-dimensional (2D) and three-dimensional (3D) spaces. Furthermore, we will study the advantages of each routing technique and provide a discussion based on their practical possibility of deployment.

scholarly journals A Cloud Based Disaster Management System

2020 ◽  
Vol 9 (1) ◽  
pp. 6 ◽  
Author(s):  
Omar Cheikhrouhou ◽  
Anis Koubaa ◽  
Anis Zarrad
Keyword(s):  
Real Time ◽  
Disaster Management ◽  
Sensor Nodes ◽  
Sensor Data ◽  
Wireless Sensor ◽  
Game Engine ◽  
New Paradigm ◽  
Lossy Networks ◽  
Training Environment ◽  
3D Environment

The combination of wireless sensor networks (WSNs) and 3D virtual environments opens a new paradigm for their use in natural disaster management applications. It is important to have a realistic virtual environment based on datasets received from WSNs to prepare a backup rescue scenario with an acceptable response time. This paper describes a complete cloud-based system that collects data from wireless sensor nodes deployed in real environments and then builds a 3D environment in near real-time to reflect the incident detected by sensors (fire, gas leaking, etc.). The system’s purpose is to be used as a training environment for a rescue team to develop various rescue plans before they are applied in real emergency situations. The proposed cloud architecture combines 3D data streaming and sensor data collection to build an efficient network infrastructure that meets the strict network latency requirements for 3D mobile disaster applications. As compared to other existing systems, the proposed system is truly complete. First, it collects data from sensor nodes and then transfers it using an enhanced Routing Protocol for Low-Power and Lossy Networks (RLP). A 3D modular visualizer with a dynamic game engine was also developed in the cloud for near-real time 3D rendering. This is an advantage for highly-complex rendering algorithms and less powerful devices. An Extensible Markup Language (XML) atomic action concept was used to inject 3D scene modifications into the game engine without stopping or restarting the engine. Finally, a multi-objective multiple traveling salesman problem (AHP-MTSP) algorithm is proposed to generate an efficient rescue plan by assigning robots and multiple unmanned aerial vehicles to disaster target locations, while minimizing a set of predefined objectives that depend on the situation. The results demonstrate that immediate feedback obtained from the reconstructed 3D environment can help to investigate what–if scenarios, allowing for the preparation of effective rescue plans with an appropriate management effort.

scholarly journals Pseudo-Random Encryption for Security Data Transmission in Wireless Sensor Networks

Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2452 ◽  
Author(s):  
Liang Liu ◽  
Wen Chen ◽  
Tao Li ◽  
Yuling Liu
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Data Fusion ◽  
Data Transmission ◽  
Multiple Scales ◽  
Sensor Data ◽  
Wireless Sensor ◽  
Fusion Center ◽  
Inverse Mapping ◽  
The Matrix

The security of wireless sensor networks (WSN) has become a great challenge due to the transmission of sensor data through an open and wireless network with limited resources. In the paper, we discussed a lightweight security scheme to protect the confidentiality of data transmission between sensors and an ally fusion center (AFC) over insecure links. For the typical security problem of WSN’s binary hypothesis testing of a target’s state, sensors were divided into flipping and non-flipping groups according to the outputs of a pseudo-random function which was held by sensors and the AFC. Then in order to prevent an enemy fusion center (EFC) from eavesdropping, the binary outputs from the flipping group were intentionally flipped to hinder the EFC’s data fusion. Accordingly, the AFC performed inverse flipping to recover the flipped data before data fusion. We extended the scheme to a more common scenario with multiple scales of sensor quantification and candidate states. The underlying idea was that the sensor measurements were randomly mapped to other quantification scales using a mapping matrix, which ensured that as long as the EFC was not aware of the matrix, it could not distract any useful information from the captured data, while the AFC could appropriately perform data fusion based on the inverse mapping of the sensor outputs.

scholarly journals A Method for Energy Balance and Data Transmission Optimal Routing in Wireless Sensor Networks

Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 3017 ◽  
Author(s):  
Xuesong Liu ◽  
Jie Wu
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Balance ◽  
Energy Distribution ◽  
Data Transmission ◽  
Line Length ◽  
Wireless Sensor ◽  
Hop Count ◽  
Transmission Distance

Wireless sensor networks are widely used in many fields. Nodes in the network are typically powered by batteries. Because the energy consumption of wireless communication is related to the transmission distance, the energy consumption of nodes in different locations is different, resulting in uneven energy distribution of nodes. In some special applications, all nodes are required to work at the same time, and the uneven energy distribution makes the effective working time of the system subject to the node with the largest energy consumption. The commonly used clustering protocol can play a role in balancing energy consumption, but it does not achieve optimal energy consumption. This paper proposes to use the power supply line to connect the nodes to fully balance the energy. The connection scheme with the shortest power line length is also proposed. On the basis of energy balance, the method of transmitting data with the best hop count is proposed, which fully reduces the power consumption of the data transmission. The simulation results show that the proposed method can effectively reduce the energy consumption and prolong the lifetime of wireless sensor networks.

Sign in / Sign up

Export Citation Format

Share Document