scholarly journals Adsorption Analysis of Fluoride Removal Using Graphene Oxide/Eggshell Adsorbent

2020 ◽  
Vol 20 (3) ◽  
pp. 579
Author(s):  
Norhusna Mohamad Nor ◽  
Nur Hidayahtul Nazrah Kamil ◽  
Amirul Izan Mansor ◽  
Hawaiah Imam Maarof
Keyword(s):  
Graphene Oxide ◽  
Second Order ◽  
Fluoride Removal ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Fluoride Ions ◽  
Thermodynamic Studies ◽  
Adsorption Analysis ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Graphene oxide with eggshells (GO/ES) adsorbent has been studied for fluoride ions (F–) removal. An adsorption study was conducted in batch experiments at different adsorption parameters, which are initial F– concentration, contact time, and temperature. The effects of these adsorption parameters towards F– removal by using GO/ES adsorbent were investigated. The adsorption parameters were then analyzed with adsorption isotherms (Langmuir and Freundlich), kinetics (pseudo-first-order and second-order) and thermodynamic studies. Under various parameters, GO/ES is proven as an effective adsorbent with an adsorption capacity of F– are up to 48 mg/g. The experimental data were satisfactorily fitted with Langmuir isotherm, which illustrated the monolayer pattern of F– adsorption into GO/ES adsorbent. The adsorption kinetic analysis indicated that the adsorption data could be well described by Pseudo-second-order kinetic model, which indicated the chemisorption process, while thermodynamic studies revealed that the adsorption of F– was an exothermic process.

scholarly journals Equilibrium and kinetics studies for the adsorption of Ni2+ and Fe3+ ions from aqueous solution by graphene oxide

2017 ◽  
Vol 19 (3) ◽  
pp. 120-129 ◽  
Author(s):  
Wojciech Konicki ◽  
Małgorzata Aleksandrzak ◽  
Ewa Mijowska
Keyword(s):  
Graphene Oxide ◽  
Kinetic Model ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Intraparticle Diffusion Model ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, the adsorption of Ni2+ and Fe3+ metal ions from aqueous solutions onto graphene oxide (GO) have been explored. The effects of various experimental factors such as pH of the solution, initial metal ion concentration and temperature were evaluated. The kinetic, equilibrium and thermodynamic studies were also investigated. The adsorption rate data were analyzed using the pseudo-first-order kinetic model, the pseudo-second-order kinetic model and the intraparticle diffusion model. Kinetic studies indicate that the adsorption of both ions follows the pseudo-second-order kinetics. The isotherms of adsorption data were analyzed by adsorption isotherm models such as Langmuir and Freundlich. Equilibrium data fitted well with the Langmuir model. The maximum adsorption capacities of Ni2+ and Fe3+ onto GO were 35.6 and 27.3 mg g−1, respectively. In addition, various thermodynamic parameters, such as enthalpy (ΔHO), entropy (ΔSO) and Gibbs free energy (ΔGO), were calculated.

scholarly journals Removal of Pb(II) using Hydroxyapatite from Golden Snail Shell (Pomacea canaliculata L.) Modified with Silica

Molekul ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 130
Author(s):  
Poedji Loekitowati Hariani ◽  
Fahma Riyanti ◽  
Fatma Fatma ◽  
Addy Rachmat ◽  
Aldi Herbanu
Keyword(s):  
Contact Time ◽  
Second Order ◽  
Pomacea Canaliculata ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
First Order ◽  
Optimum Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The composites of hydroxyapatite and SiO2 were successfully synthesized. The hydroxyapatite was prepared from golden snail shells (Pomacea canaliculata L). The hydroxyapatite and hydroxyapatite-SiO2 composites were characterized using XRD, FTIR, SEM-EDS. Furthermore, hydroxyapatite and hydroxyapatite-SiO2 composites were used to remove Pb(II) from aqueous solution. Various adsorption parameters such as pH of the solution, contact time, and initial Pb(II) concentration were used to study the adsorption process. The optimum pH of the solution for removal of Pb(II) by hydroxyapatite and hydroxyapatite-SiO2 composite at pH 6 and contact time at 60 minutes. Both adsorbents follow the Langmuir isotherm. The maximum adsorption capacity of the hydroxyapatite-SiO2 composite is greater compare to hydroxyapatite, respectively 135.14 and 123.46 mg/g. The pseudo-second order kinetic model had a correlation coefficient (R2) greater than the pseudo-first order so pseudo-second order kinetic is better to describe adsorption kinetics

Isothermal, Kinetic, and Thermodynamic Studies of Graphene Oxide Adsorption on Silk

2021 ◽  
Vol 8 (5) ◽  
pp. 18-29
Author(s):  
Arobindo Chatterjee ◽  
Vinit Kumar Jain
Keyword(s):  
Graphene Oxide ◽  
Freundlich Isotherm ◽  
Sorption Process ◽  
Order Kinetic ◽  
Solution Ph ◽  
Thermodynamic Studies ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Isothermal Kinetic ◽  
Kinetics Of

The properties of graphene enriched silk depend on the amount of graphene oxide (GO) adsorption on silk. GO dipping parameters include the GO solution pH, initial GO concentration, dipping time and temperature, and the type of substrate. The effects of GO dipping parameters on the sorption process are studied to achieve the maximum GO adsorption on the silk surface for the preparation of an economical graphene/silk-based textile product. In addition, equilibrium isotherms, kinetics, and thermodynamics of GO adsorption on the silk surface in a batch sorption process are examined to understand the adsorption mechanism. The Freundlich isotherm best describes the adsorption of GO onto the silk. A pseudo-second order kinetic model best describes the kinetics of GO adsorption. Thermodynamic studies reveal that GO adsorption is spontaneous and exothermic.

Studies of Chromium Removal from Tannery Effluents by Dead Streptomyces Rimosus

2008 ◽  
Vol 3 (1) ◽  
Author(s):  
Mohamed Nasser Sahmoune ◽  
Krim Louhab ◽  
Aissa Boukhiar
Keyword(s):  
Fractional Power ◽  
Kinetic Studies ◽  
Second Order ◽  
Order Kinetic ◽  
Streptomyces Rimosus ◽  
Tannery Effluents ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ph Range

Dead streptomyces rimosus was found to be an effective biosorbent for the removal of chromium from industrial tanning effluents. A sorption level of 65 mg/g was observed at pH 4.8 while the precipitation effect augmented this value at a higher pH range. Chromium desorption increased with decreasing desorption agents pH (including HCl and H2SO4) to a maximum value of 95% at approximately zero pH. The biosorption data of trivalent chromium by streptomyces rimosus has been used for kinetic studies based on fractional power, Elovich, pseudo-first order and pseudo-second order rate expressions. The time-dependent Cr (III) biosorption data were well-described by a pseudo-second-order kinetic model. The intraparticle diffusion is not the rate-limiting step for the whole reaction. It was found that the biosorption equilibrium data fit well with the Langmuir model.

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

scholarly journals Comparison of adsorptions by rice hull and Lewatit TP 214 of platinum in chloride solution

2013 ◽  
Vol 78 (6) ◽  
pp. 811-826 ◽  
Author(s):  
M.H. Morcali ◽  
B. Zeytuncu ◽  
O. Yucel
Keyword(s):  
Waste Product ◽  
Second Order ◽  
Attenuated Total Reflection ◽  
Rate Equations ◽  
Rice Hull ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Biomass Waste ◽  
Equilibrium Data ◽  
Pseudo Second Order

Rice hull, a biomass waste product, and Lewatit TP 214, a thiosemicarbazide sorbent, were investigated as adsorbents for the adsorption of platinum (IV) ions from synthetically prepared dilute chloroplatinic acid solutions. The rice hull was characterized by Attenuated Total Reflection-Fourier transform infrared spectroscopy (ATR-FTIR). The effects of the different adsorption parameters, sorbent dosage, contact time, temperature and pH of solution on adsorption percentage were studied in detail on a batch sorption. The adsorption equilibrium data were best fitted with the Langmuir isotherm model. The maximum monolayer adsorption capacities, Qmax, at 25?C were found to be 42.02 and 33.22 mg g-1 for the rice hull and Lewatit TP 214, respectively. Thermodynamic calculations using the measured ?H?, ?S? and ?G? values indicate that the adsorption process was spontaneous and exothermic. The pseudo-first-order and pseudo-second-order rate equations were investigated; the adsorption of platinum ions for both sorbents was found to be described by the pseudo-second-order kinetic model. The kinetic rate, k2, using 30 mg sorbent at 25?C was found to be 0.0289 and 0.0039 g min-1 mg-1 for the rice hull and Lewatit TP 214, respectively. The results indicated that the rice hull can be effectively used for the removal of platinum from aqueous solution.

Dyeing mechanism and photodegradation kinetics of gardenia yellow natural colorant

2020 ◽  
pp. 004051752095848
Author(s):  
Huiyu Jiang ◽  
Xiaodong Hu ◽  
Asfandyar Khan ◽  
Jinbo Yao ◽  
Muhammad Tahir Hussain
Keyword(s):  
Kinetic Model ◽  
Cotton Fabric ◽  
Reaction Rate Constant ◽  
Second Order ◽  
Order Kinetic ◽  
Natural Colorant ◽  
Yellow Solution ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Dyeing Rate

In this study, gardenia yellow solution is used to dye 100% cotton fabric. The dyeing rate curve and adsorption isotherms were recorded to explore the thermodynamic model and to calculate the corresponding parameters. A definite concentration of gardenia yellow solution was placed under the xenon arc lamp for irradiation to test its photodegradability. Absorbance of the solution was measured at different degradation times and the corresponding varying curve of the absorbance was drawn to explore the photodegradation reaction order of the natural colorant and consistent parameters were calculated. The experimental results proved that the dyeing of cotton fabric with gardenia yellow colorant followed the pseudo second order kinetic model whereas adsorption isotherm followed the Langmuir model and the photodegradation process followed the second order kinetic model. Values of different parameters were calculated: reaction rate constant k = 2.26 × 10–3 (mg · L−1)1−m h−1, the correlation coefficient R2 = 0.994, and half decay time t1/2 = 5.82 h.

scholarly journals Modified Spruce Sawdust for Sorption of Hexavalent Chromium in Batch Systems and Fixed-Bed Columns

Molecules ◽  
2020 ◽  
Vol 25 (21) ◽  
pp. 5156
Author(s):  
Dororthea Politi ◽  
Dimitrios Sidiras
Keyword(s):  
Sulfuric Acid ◽  
Adsorption Capacity ◽  
Hexavalent Chromium ◽  
Diethylene Glycol ◽  
Fixed Bed ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order

This study investigated the potential use of spruce sawdust that was pretreated with diethylene glycol and sulfuric acid for the removal of hexavalent chromium from wastewater. The sawdust pretreatment process was conducted at different temperatures and times. The adsorbent was characterized by quantitative saccharification, scanning electron microscopy, and Brunauer–Emmet–Teller surface area analysis. Adsorption capacity was studied for both batch and column processes. The experimental adsorption isotherms were simulated using seven isotherm models, including Freundlich and Langmuir models. By using the Langmuir isotherm model, the maximal Cr(VI) adsorption capacity of organosolv-pretreated spruce sawdust (qm) was 318.3 mg g−1. Furthermore, the kinetic data were fitted to Lagergren, pseudo-second-order, and intraparticle diffusion models, revealing that the adsorption of Cr(VI) onto spruce sawdust pretreated with diethylene glycol and sulfuric acid is best represented by the pseudo-second-order kinetic model. Three kinetic models, namely, the Bohart–Adams model, Thomas model, and modified dose–response (MDR) model, were used to fit the experimental data obtained from the column experiments and to resolve the characteristic parameters. The Thomas adsorption column capacity of the sawdust was increased from 2.44 to 31.1 mg g−1 upon pretreatment, thus, demonstrating that organosolv treatment enhances the adsorption capability of the material.

Alkaline deoxygenated graphene oxide as adsorbent for cadmium ions removal from aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1611-1619 ◽  
Author(s):  
Jun Liu ◽  
Hongyan Du ◽  
Shaowei Yuan ◽  
Wanxia He ◽  
Pengju Yan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Alkaline deoxygenated graphene oxide (aGO) was prepared through alkaline hydrothermal treatment and used as adsorbent to remove Cd(II) ions from aqueous solutions for the first time. The characterization results of transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared (FT-IR) spectra indicate that aGO was successfully synthesized. The batch adsorption experiments showed that the adsorption kinetics could be described by the pseudo-second-order kinetic model, and the isotherms equilibrium data were well fitted with the Langmuir model. The maximum adsorption capacity of Cd(II) on aGO was 156 mg/g at pH 5 and T = 293 K. The adsorption thermodynamic parameters indicated that the adsorption process was a spontaneous and endothermic reaction. The mainly adsorption mechanism speculated from FT-IR results may be attributed to the electrostatic attraction between Cd2+ and negatively charged groups (–CO−) of aGO and cation-π interaction between Cd2+ and the graphene planes. The findings of this study demonstrate the potential utility of the nanomaterial aGO as an effective adsorbent for Cd(II) removal from aqueous solutions.

Second-Order Kinetic Model for the Sorption of Cu(II) Ions in Aqueous Solutions of Zeolite NaA

2012 ◽  
Vol 560-561 ◽  
pp. 1174-1177 ◽  
Author(s):  
Dimitar Petrov Georgiev ◽  
Bogdan Iliev Bogdanov ◽  
Yancho Hristov ◽  
Irena Markovska
Keyword(s):  
Kinetic Model ◽  
Aqueous Solutions ◽  
Kinetic Parameters ◽  
Linear Equations ◽  
Linear Method ◽  
Second Order ◽  
Order Kinetic ◽  
Zeolite Naa ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this study, the sorption of Cu(II) ions in aqueous solutions of Zeolite NaA by performing batch kinetic sorption experiments. The equilibrium kinetic data were analyzed using the pseudo-second-order kinetic model. A comparison was made of the linear least-squares method and nonlinear method of the widely used pseudo-second-order kinetic model for the sorption of Cu(II) ions of Zeolite . Four pseudo-second-order kinetic linear equations are discussed. Kinetic parameters obtained from the four kinetic linear equations using the linear method differed but they were the same when using the non-linear method. Kinetic parameters obtained from four kinetic linear equations using the linear method differed. Equation type 1 pseudo-second-order kinetic model very well represented the kinetic of the adsorption Cu(II) ions by Zeolite NaA. Equation type 4 exhibited the worst fit. Present investigation showed that the non-linear method may be a better way to determine the kinetic parameters.

Sign in / Sign up

Export Citation Format

Share Document