scholarly journals Functionalization of Cellulose through Polyurethanization by the Addition of Polyethylene Glycol and Diisocyanate

2019 ◽  
Vol 19 (1) ◽  
pp. 124
Author(s):  
Imam Prabowo ◽  
Ghiska Ramahdita ◽  
Mochamad Chalid
Keyword(s):  
Hard Segment ◽  
Soft Segment ◽  
Simultaneous Thermal Analysis ◽  
High Strength ◽  
Melting Temperatures ◽  
Grafting Technique ◽  
Plastic Materials ◽  
1H Nuclear Magnetic Resonance ◽  
A Chain ◽  
The Impact

Plastic consumption becomes a main factor of land pollution due to poor degradability. To reduce the impact of land pollution, a biodegradable material such as cellulose, which has biodegradability, high strength, and specific modulus, is combined with plastic materials. However, the combination result poor compatibility because of different properties. Through grafting technique, the compatibility can be improved. The experimental results were conducted using Fourier-Transform Infrared (FT-IR), Simultaneous Thermal Analysis (STA), Scanning Electron Microscope (SEM) and 1H-Nuclear Magnetic Resonance (1H-NMR). The results revealed that the structure of hybrid material consists of cellulose as a chain extender in a hard segment which connects two diisocyanate compounds and polyol as a soft segment. The addition of 2.5 g of cellulose and 5 mole of diisocyanate can increase the melting temperature (Tm) of the hard segment from 417.92 to 460.72 °C and from 417.92 to 467.04 °C respectively. However, its melting temperatures of soft segment decrease from 378.53 to 350.74 °C and from 378.53 to 350.74 °C as well as the glass transition temperature (Tg) of the soft segment from 73.7 to 57.2 °C and from 73.7 to 71.8 °C. This study also discovers that cellulose and diisocyanate can raise thermal stability and create good interfacial bonding.

scholarly journals Synthesis of thermoplastic poly(ester-siloxane)s in the melt and in solution

2005 ◽  
Vol 70 (12) ◽  
pp. 1469-1485 ◽  
Author(s):  
Biljana Dojcinovic ◽  
Vesna Antic ◽  
Marija Vuckovic ◽  
Jasna Djonlagic
Keyword(s):  
1H Nmr Spectroscopy ◽  
Hard Segment ◽  
Soft Segment ◽  
Weight Ratio ◽  
Thermoplastic Elastomers ◽  
Degree Of Crystallinity ◽  
Mechanical Spectroscopy ◽  
Scanning Calorimetry ◽  
Melting Temperatures ◽  
High Boiling Solvent

Two series of thermoplastic elastomers, based on poly(dimethylsiloxane) PDMS, as the soft segment and poly(butylene terephthalate), PBT, as the hard segment, were synthesized by catalyzed transesterification, from dimethyl terephthalate, DMT, silanol-terminated poly(dimethylsiloxane), PDMS-OH Mn=1750g/mol, and 1,4-butanediol, BD. The mole ratio of the starting comonomers was selected to result in a constant hard to soft weight ratio of 55:45. The first series was synthesized in order to determine the optimal mole ratio of BD and DMT for the synthesis of high molecular weight thermoplastic poly(ester-siloxane)s, TPESs. The second series was performed in the presence of the high-boiling solvent, 1,2,4-trichlorbenzene in order to increase the mixing between the extremely non-polar siloxane prepolymer and the polar reactants, DMT and BD, and, therefore, avoid phase separation during synthesis. The structure and composition of the synthesized poly(ester-siloxane)s were verified by 1H-NMR spectroscopy, while the melting temperatures and degree of crystallinity were determined by differential scanning calorimetry (DSC). The effectiveness of the incorporation of the silanol-terminated poly( dimethylsiloxane) into the polyester chains was verified by chloroform extraction. The rheological properties of the poly(ester-siloxane)s were investigated by dynamic mechanical spectroscopy (DMA).

scholarly journals Effective Demand Forecasting in Health Supply Chains: Emerging Trend, Enablers, and Blockers

Logistics ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 12
Author(s):  
Lakshmy Subramanian
Keyword(s):  
Supply Chains ◽  
Demand Forecasting ◽  
Weak Links ◽  
Key Factors ◽  
Scarce Resources ◽  
Weakest Link ◽  
Emerging Trends ◽  
A Chain ◽  
Health Commodities ◽  
The Impact

Health supply chains aim to improve access to healthcare, and this can be attained only when health commodities appropriate to the health needs of the global population are developed, manufactured, and made available when and where needed. The weak links in the health supply chains are hindering the access of essential healthcare resulting in inefficient use of scarce resources and loss of lives. A chain is only as strong as its weakest link, and demand forecasting is one of the weakest links of health supply chains. Also, many of the existing bottlenecks in supply chains and health systems impede the accurate forecasting of demand, and without the ability to forecast demand with certainty, the stakeholders cannot plan and make commitments for the future. Forecasts are an important feeder for budgeting and logistics planning. Under this backdrop, the study examines how improved forecasting can lead to better short-term and long-term access to health commodities and outlines market-related risks. It explores further how incentives are misaligned creating an uneven distribution of risks, leading to the inability to match demand and supply. For this purpose, a systematic literature review was performed, analyzing 71 articles from a descriptive and content approach. Findings indicate the emerging trends in global health and the consequences of inaccurate demand forecasting for health supply chains. The content analysis identifies key factors that can pose a varying degree of risks for the health supply chain stakeholders. The study highlights how the key factors emerge as enablers and blockers, depending on the impact on the overall health supply chains. The study also provides recommendations for actions for reducing these risks. Consequently, limitations of this work are presented, and opportunities are identified for future lines of research. Finally, the conclusion confirms that by adopting a combination of approaches, stakeholders can ensure better information sharing, identify avenues of diversifying risks, and understand the implications.

scholarly journals Impact resistance of steel materials to ballistic ejecta and shelter development using steel deck plates

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Hiroyuki Yamada ◽  
Kohei Tateyama ◽  
Shino Naruke ◽  
Hisashi Sasaki ◽  
Shinichi Torigata ◽  
...  
Keyword(s):  
Impact Energy ◽  
Impact Test ◽  
Impact Resistance ◽  
Protective Layer ◽  
High Strength ◽  
Steel Plates ◽  
Corrugated Plates ◽  
Shelter Construction ◽  
The Impact ◽  
Ballistic Ejecta

AbstractThe destruction caused by ballistic ejecta from the phreatic eruptions of Mt. Ontake in 2014 and Mt. Kusatsu-Shirane (Mt. Moto-Shirane) in 2018 in Japan, which resulted in numerous casualties, highlighted the need for better evacuation facilities. In response, some mountain huts were reinforced with aramid fabric to convert them into shelters. However, a number of decisions must be made when working to increase the number of shelters, which depend on the location where they are to be built. In this study, we propose a method of using high-strength steel to reinforce wooden buildings for use as shelters. More specifically, assuming that ballistic ejecta has an impact energy of 9 kJ or more, as in previous studies, we developed a method that utilizes SUS304 and SS400 unprocessed steel plates based on existing impact test data. We found that SUS304 is particularly suitable for use as a reinforcing material because it has excellent impact energy absorption characteristics due to its high ductility as well as excellent corrosion resistance. With the aim of increasing the structural strength of steel shelters, we also conducted an impact test on a shelter fabricated from SS400 deck plates (i.e., steel with improved flexural strength provided by work-hardened trapezoidal corrugated plates). The results show that the shelter could withstand impact with an energy of 13.5 kJ (2.66 kg of simulated ballistic ejecta at 101 m/s on impact). In addition, from the result of the impact test using the roof-simulating structure, it was confirmed the impact absorption energy is further increased when artificial pumice as an additional protective layer is installed on this structure. Observations of the shelter after the impact test show that there is still some allowance for deformation caused by projectile impact, which means that the proposed steel shelter holds promise, not only structurally, but also from the aspects of transportation and assembly. Hence, the usefulness of shelters that use steel was shown experimentally. However, shelter construction should be suitable for the target environment.

scholarly journals Toughness Property Control by Nb and Mo Additions in High-Strength Quenched and Tempered Boron Steels

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 95
Author(s):  
Irati Zurutuza ◽  
Nerea Isasti ◽  
Eric Detemple ◽  
Volker Schwinn ◽  
Hardy Mohrbacher ◽  
...  
Keyword(s):  
Solid Solution ◽  
Transition Temperature ◽  
High Strength ◽  
Unit Size ◽  
Tempered Martensite ◽  
Size Refinement ◽  
Direct Quenching ◽  
Property Control ◽  
The Impact ◽  
Impact Transition Temperature

The synergetic effect on hardenability by combining boron with other microalloying elements (such as Nb, Mo and Nb + Mo) is widely known for high-strength medium carbon steels produced by direct quenching and subsequent tempering treatment. The improvement of mechanical properties could be reached through optimization of different mechanisms, such as solid solution hardening, unit size refinement, strain hardening, fine precipitation hardening and the effect of carbon in solid solution. The current study proposes a procedure for evaluating the contribution of different microstructural aspects on Charpy impact toughness. First, the effect that austenite conditioning has on low-temperature transformation unit sizes and microstructural homogeneity was analysed for the different microalloying element combinations. A detailed crystallographic characterization of the tempered martensite was carried out using electron backscattered diffraction (EBSD) in order to quantify the effect of unit size refinement and dislocation density. The impact of heterogeneity and presence of carbides was also evaluated. The existing equations for impact transition temperature (ITT50%) predictions were extended from ferrite-pearlite and bainitic microstructures to tempered martensite microstructures. The results show that microstructural refinement is most beneficial to strength and toughness while unit size heterogeneity has a particularly negative effect on ductile-to-brittle transition behaviour. By properly balancing alloy concept and processing, steel having a yield strength above 900 MPa and low impact transition temperature could be obtained by direct quenching and tempering.

scholarly journals Ultrahigh Ballistic Resistance of Twisted Bilayer Graphene

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 206
Author(s):  
Qing Peng ◽  
Sheng Peng ◽  
Qiang Cao
Keyword(s):  
Weight Ratio ◽  
High Strength ◽  
Bilayer Graphene ◽  
Energy Propagation ◽  
Dynamic Simulations ◽  
Protective Material ◽  
Impact Performance ◽  
Ballistic Resistance ◽  
Twisted Bilayer Graphene ◽  
The Impact

Graphene is a good candidate for protective material owing to its extremely high stiffness and high strength-to-weight ratio. However, the impact performance of twisted bilayer graphene is still obscure. Herein we have investigated the ballistic resistance capacity of twisted bilayer graphene compared to that of AA-stacked bilayer graphene using molecular dynamic simulations. The energy propagation processes are identical, while the ballistic resistance capacity of the twisted bilayer graphene is almost two times larger than the AA-bilayer graphene. The enhanced capacity of the twisted bilayer graphene is assumed to be caused by the mismatch between the two sheets of graphene, which results in earlier fracture of the first graphene layer and reduces the possibility of penetration.

scholarly journals Tempforming as an Advanced Processing Method for Carbon Steels

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1566
Author(s):  
Anastasiya Dolzhenko ◽  
Rustam Kaibyshev ◽  
Andrey Belyakov
Keyword(s):  
Impact Toughness ◽  
Crack Propagation ◽  
Large Strain ◽  
High Strength ◽  
Close Relation ◽  
Carbon Steels ◽  
Processing Method ◽  
Propagation Mode ◽  
Displacement Curve ◽  
The Impact

The microstructural mechanisms providing delamination toughness in high-strength low-alloyed steels are briefly reviewed. Thermo-mechanical processing methods improving both the strength and impact toughness are described, with a close relation to the microstructures and textures developed. The effect of processing conditions on the microstructure evolution in steels with different carbon content is discussed. Particular attention is paid to tempforming treatment, which has been recently introduced as a promising processing method for high-strength low-alloyed steel semi-products with beneficial combination of strength and impact toughness. Tempforming consists of large strain warm rolling following tempering. In contrast to ausforming, the steels subjected to tempforming may exhibit an unusual increase in the impact toughness with a decrease in test temperature below room temperature. This phenomenon is attributed to the notch blunting owing to easy splitting (delamination) crosswise to the principle crack propagation. The relationships between the crack propagation mode, the delamination fracture, and the load-displacement curve are presented and discussed. Further perspectives of tempforming applications and promising research directions are outlined.

Physical Simulation of Weldability of Weldox 1300 Steel

2013 ◽  
Vol 762 ◽  
pp. 551-555 ◽  
Author(s):  
Marek Stanislaw Węglowski ◽  
Marian Zeman ◽  
Miroslaw Lomozik
Keyword(s):  
Mechanical Properties ◽  
Impact Toughness ◽  
Physical Simulation ◽  
High Strength ◽  
Parent Material ◽  
Cooling Time ◽  
Electron Microscopies ◽  
Transmission Electron ◽  
Transformation Diagrams ◽  
The Impact

In the present study, the investigation of weldability of new ultra-high strength - Weldox 1300 steel has been presented. The thermal simulated samples were used to investigate the effect of welding cooling time t8/5 on the microstructure and mechanical properties of the heat affected zone (HAZ). In the frame of these investigation the microstructure was studied by the light (LM) and transmission electron microscopies (TEM). It has been shown that the microstructure of the Weldox 1300 steel is composed of tempered martensite, and inside the laths the minor precipitations mainly V(CN) and molybdenum carbide Mo2C were observed. Mechanical properties of parent material were analysed by the tensile, impact and hardness tests. In details the influence of cooling time in the range of 2,5 - 300 s. on hardness, impact toughness and microstructure of simulated HAZ was studied by using welding thermal simulation test. The results show that the impact toughness and hardness decrease with the increase of t8/5 under the condition of a single thermal cycle in simulated HAZ. The continuous cooling transformation diagrams (CCT-W for welding conditions) of Weldox 1300 steel for welding purposes was also elaborated. The steel Weldox 1300 for cooling time in the range of 2,5 - 4 s showed martensite microstructure, for time from 4 s to 60 s mixture of martensite and bainite, and for longer cooling time mixture of ferrite, bainite and martensite. The results indicated that the weldability of Weldox 1300 steel is limited and to avoid the cold cracking the preheating procedure or medium net linear heat input should be used.

Effect of Catalysts on the Properties of Fluorinated Polyurethanes

2013 ◽  
Vol 464 ◽  
pp. 9-13 ◽  
Author(s):  
Zan Li ◽  
Xia Wang ◽  
Ying Li ◽  
Wei Chain ◽  
Jiao Jiao Hu
Keyword(s):  
Hard Segment ◽  
Soft Segment ◽  
Force Microscopy ◽  
Atomic Force ◽  
Structure Surface ◽  
Improved Stability ◽  
Ft Ir ◽  
Tin Metal ◽  
Polyether Polyol ◽  
Catalyst Efficiency

Fluorinated polyurethanes (FPU) was prepared using fluorinated polyether polyol (FPO) as the soft segment, 4,4`-diphenylmethane diisocyanate (MDI) as the hard segment, 1,4-butanodiol (BDO) as the chain extender and catalysts. Tin metal catalysts were used to catalyze the polyurethane reaction of polyether polyols and isocyanate. The effect of different catalysts including stannous octoate (T-9) and dibutyltindalautrate (DBTDL) on the structure, surface properties and thermal properties of FPU was studied. The structural elucidation of the synthesized FPU was performed by Fourier transform infrared (FT-IR) and discovered that with decreasing catalyst efficiency or without catalyst, the strength of hydrogen bounds were enhanced. The FPU films surface was characterized by contact angle (CA) and atomic force microscopy (AFM) and it was found that the phase separation was increasing with increasing catalyst efficiency. The thermal property was exhibited by Thermo gravimetric (TG) and showed that joining catalyst improved stability significantly.

The impact of neutralizer-free ignition of a radio frequency ion thruster on the lifetime of the ion optics system

2021 ◽  
pp. 2140017
Author(s):  
Long-Fei Ma ◽  
Li Duan ◽  
Jian-Wu He ◽  
Qi Kang ◽  
Keyword(s):  
Radio Frequency ◽  
Pyrolytic Graphite ◽  
High Strength ◽  
Surface Damage ◽  
External Source ◽  
Ion Thruster ◽  
Neutral Gas ◽  
Discharge Ignition ◽  
Ion Optical System ◽  
The Impact

In the initial stage of a radio frequency ion thruster (RIT) ignition, an influx of electrons is required from an external source into the discharge chamber and ionization of the neutral gas propellant. A neutralizer-free method for Townsend breakdown discharge ignition based on Paschen’s law was developed in this study. The feasibility of the ignition method was confirmed by performing thousands of ignition experiments. Metallic Molybdenum (Mo), pyrolytic graphite (PG) and Zr[Formula: see text]Ti[Formula: see text]Cu[Formula: see text]Ni[Formula: see text]Be[Formula: see text]alloy acceleration grids were prepared, and ignition-induced damage on the grids was investigated. A field-emission scanning electron microscope was used to inspect surface damage on the grids after multiple ignitions and to analyze the influence of the ignition method on the lifetime of the ion optical system. Grid materials for space missions that require multiple RIT ignitions (10[Formula: see text] should be high-strength blocks that are resistant to sputtering corrosion and high temperature.

Sign in / Sign up

Export Citation Format

Share Document