scholarly journals Activated Carbon from Spent Brewery Barley Husks for Cadmium Ion Adsorption from Aqueous Solution

2018 ◽  
Vol 18 (1) ◽  
pp. 145 ◽  
Author(s):  
Ilesanmi Osasona ◽  
Kayode Aiyedatiwa ◽  
Jonathan Johnson ◽  
Oluwabamise Lekan Faboya
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Solution Concentration ◽  
Isotherm Models ◽  
Cadmium Ion ◽  
Solution Ph ◽  
Barley Husk ◽  
Equilibrium Data

This study investigated the feasibility of using acid activated carbon prepared from brewery spent barley husks for the adsorption of cadmium from aqueous solution. The effects of operation parameters such as pH, contact time, adsorbent dosage, concentration and temperature were verified. The amount of cadmium adsorbed increased with increase in solution pH, initial solution concentration and with the amount of adsorbent dosed. A time of 5 minutes was required for attainment of equilibrium. The equilibrium data obtained were analysed using both Langmuir and Freundlich isotherm models and the data were better described by Langmuir model with correlation coefficient of 0.9183. The thermodynamic parameters revealed that the removal of cadmium by the activated carbon was exothermic and spontaneous. Thus, activated carbon obtained from brewery spent barley husk can be employed as an economically viable low-cost adsorbent for removing cadmium from aqueous solution. 

scholarly journals Equilibrium, Kinetics, and Thermodynamics of the Removal of Nickel(II) from Aqueous Solution Using Cow Hooves

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
I. Osasona ◽  
O. O. Ajayi ◽  
A. O. Adebayo
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Room Temperature ◽  
Physical Adsorption ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Equilibrium Data

The feasibility of using powdered cow hooves (CH) for removing Ni2+ from aqueous solution was investigated through batch studies. The study was conducted to determine the effect of pH, adsorbent dosage, contact time, adsorbent particle size, and temperature on the adsorption capacity of CH. Equilibrium studies were conducted using initial concentration of Ni2+ ranging from 15 to 100 mgL−1 at 208, 308, and 318 K, respectively. The results of our investigation at room temperature indicated that maximum adsorption of Ni2+ occurred at pH 7 and contact time of 20 minutes. The thermodynamics of the adsorption of Ni2+ onto CH showed that the process was spontaneous and endothermic. Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were used to quantitatively analysed the equilibrium data. The equilibrium data were best fitted by Freundlich isotherm model, while the adsorption kinetics was well described by pseudo-second-order kinetic equation. The mean adsorption energy obtained from the D-R isotherm revealed that the adsorption process was dominated by physical adsorption. Powdered cow hooves could be utilized as a low-cost adsorbent at room temperature under the conditions of pH 7 and a contact time of 20 minutes for the removal of Ni(II) from aqueous solution.

Adsorptive Removal of Ni2+ from Aqueous Solution Using Rice Husk-Based Activated Carbon

2015 ◽  
Vol 754-755 ◽  
pp. 950-954
Author(s):  
Mohd Faisal Taha ◽  
Anis Suhaila Shuib ◽  
Maizatul Shima Shaharun ◽  
Azry Borhan
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Rice Husk ◽  
Textural Properties ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Adsorption Studies ◽  
Adsorptive Removal ◽  
Equilibrium Data ◽  
Good Potential

An attempt was made to study the potential of rice husk as an alternative cheap precursor for activated carbon to remove Ni2+ from aqueous solution. Rice husk was treated chemically (with NaOH) and physically (carbonization) to prepare rice husk based activated carbon (RHAC). The textural properties of RHAC, i.e. surface area (255 m2/g) and pore volume (0.17 cm2/g), were determined by N2 adsorption using Brunauer-Emmett-Teller (BET) surface analyzer. RHAC was also characterized for its morphology and its elemental compositions. The adsorption studies for the removal of Ni2+ from aqueous solution were carried out using different dosage of RHAC as adsorbent as a function of varied contact time. The concentration of Ni2+ was determined by atomic absorption spectrometer (AAS). The results obtained from adsorption studies indicate good potential of rice husk as a cheap precursor to produce activated carbon for the removal of Ni2+ from aqueous solution. The equilibrium data from adsorption studies fitted well the of Langmuir and Freundlich isotherm models.

scholarly journals Adsorption of Methylene Blue from aqueous solution using Senegal River Typha australis

2020 ◽  
Vol 10 (1) ◽  
pp. 22-32
Author(s):  
Abdoulaye Demba N'diaye ◽  
Youcef Aoulad El Hadj Ali ◽  
Mohamed Abdallahi Bollahi ◽  
Mostafa Stitou ◽  
Mohamed Kankou ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Activation Parameters ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Senegal River ◽  
Typha Australis ◽  
Equilibrium Data

In this work, batch adsorption experiments were carried out for the removal of Methylene Blue (MB) from aqueous solutions using Typha australis leaf as a low cost adsorbent. The effects of some variables governing the efficiency of the process such as adsorbent mass, pH, ionic strength, contact time and temperature were investigated. The adsorption kinetic data were analyzed using the Pseudo First Order (PFO) and Pseudo Second Order (PSO) models. The experimental equilibrium data were analyzed using Langmuir and Freundlich isotherm models. The results show that the PSO model is the best for describing the adsorption of MB by Typha australis for all initial MB concentrations. The equilibrium data fitted well with the Langmuir model with the monolayer adsorption capacity for MB-Typha australis leaf system was of 103.12 mg g-1. The values of activation parameters such as free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were also determined as - 4.44 kJ mol−1, 55.13 kJ mol−1 and 203.21 J mol−1 K−1, respectively. The thermodynamics parameters of MB-Typha australis system indicate spontaneous and endothermic process. These results indicate that the Typha australis leaf can be feasibly employed for the eradication of MB from aqueous solution.

scholarly journals Removal of Copper (II) Ions from Aqueous Solutions by Adsorption with Low Cost Acid Activated Cynodon Dactylon Carbon

2011 ◽  
Vol 8 (s1) ◽  
pp. S377-S391 ◽  
Author(s):  
U. Gayathri ◽  
B. R. Venkatraman ◽  
S. Arivoli
Keyword(s):  
Aqueous Solution ◽  
Cynodon Dactylon ◽  
Low Cost ◽  
Copper Ion ◽  
Freundlich Isotherm ◽  
Experimental Results ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Model Parameters ◽  
Equilibrium Data

The main purpose of this work was to exploit low cost and efficient sorbents for the removal of copper from aqueous solution usingCynodon dactyloncarbon. It was observed from the experimental results that almost 90-100% copper can be removed from the aqueous solution. Adsorption kinetics and equilibrium have been investigated as a function of initial copper ion concentration. pH, contact time and adsorbent dosage. Kinetics studies suggested that the adsorption allowed first order reaction. Equilibrium data were analyzed using Langmuir and Freundlich isotherm models. On the basis of experimental results and the model parameters, it can be concluded that the carbonaceousCynodon dactylonis effective for the removal of copper ion from aqueous solution.

Lotus seedpod as a low-cost biomass for potential methylene blue adsorption

2016 ◽  
Vol 74 (11) ◽  
pp. 2560-2568 ◽  
Author(s):  
Qiulai He ◽  
Hongyu Wang ◽  
Jing Zhang ◽  
Zhuocheng Zou ◽  
Jun Zhou ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Solution Ph ◽  
Monolayer Adsorption ◽  
Pseudo Second Order ◽  
Central Composite ◽  
Lotus Seedpod

The adsorption of methylene blue (MB) by low cost biomass lotus seedpod (LSP) was optimized by a central composite design combined with response surface methodology in aqueous solution. Solution pH, initial dye concentration and adsorbent dosage were studied as independent variables at five levels each, respectively. Analysis of variance suggested the validity of the regression model. LSP was characterized by Fourier transform infrared spectra and energy dispersive spectroscopy. The kinetics revealed that the adsorption behavior followed the pseudo-second-order model. Langmuir and Freundlich isotherm models were used to evaluate the adsorption, and the experimental data were better fitted by the Langmuir isotherm than the Freundlich isotherm. The maximum monolayer adsorption capacity of the LSP was 157.98 mg g−1 at 30 °C for MB adsorption. In addition, 0.2 M HCl solution could be used for reusability of LSP via desorption tests. LSP was proven to be an available and effective biosorbent for MB removal from aqueous solution.

scholarly journals Adsorption of Cr(VI) from aqueous solution by adsorbent prepared from paper mill sludge: Kinetics and thermodynamics studies

2017 ◽  
Vol 36 (1-2) ◽  
pp. 149-169 ◽  
Author(s):  
Fatemeh Gorzin ◽  
MM Bahri Rasht Abadi
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Contact Time ◽  
Metal Ion ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Experimental Tests ◽  
Paper Mill ◽  
Isotherm Models ◽  
Paper Mill Sludge

In the present work, a new low-cost activated carbon was prepared from paper mill sludge in order to remove Cr(VI) ions from aqueous solution. The effects of adsorbent dosage, pH, contact time, metal ion concentrations, and temperature on adsorption efficiency were studied by experimental tests. The maximum equilibrium uptake of Cr(VI) by the adsorbent was 23.18 mg g−1 at optimum pH = 4.0, contact time of 180 min, and temperature of 45℃. Analysis of equilibrium adsorption data in terms of several isotherm models revealed that Langmuir isotherm with respect to Freundlich isotherm indicates better agreement with the experimental data. The kinetics of Cr(VI) adsorption onto activated carbon was described with the pseudo-second-order model which indicates the dominance of chemisorption mechanism. Thermodynamic parameters indicated that the Cr(VI) adsorption onto adsorbent was feasible in nature, spontaneous, and endothermic.

scholarly journals Biosorption of Pb2+ and Cd2+ from Simulated Wastewater Using Melina (Gmelina arborea) Tree Leaves Powder

2018 ◽  
pp. 1-12
Author(s):  
N. O. Ilelaboye ◽  
A. A. Oderinde
Keyword(s):  
Metal Ions ◽  
Waste Treatment ◽  
Anthropogenic Activities ◽  
Freundlich Isotherm ◽  
Solution Concentration ◽  
Isotherm Models ◽  
Operational Parameters ◽  
Solution Ph ◽  
Separation Parameter ◽  
Optimum Solution

Increased anthropogenic activities have led to serious environmental problems due to pollution caused by toxic materials such as heavy metals whose levels are rising in the environment. The inefficiency and high cost of conventional methods of waste treatment have prompted the investigation of environmentally friendly and cheaper methods of treatment using natural products. In this study, G. arborea leaves powder was investigated with a view of using it as cheap material for the biosorption of Pb2+ and Cd2+   from wastewater. The effects of operational parameters like pH, biosorbent dose [g/L], initial metal ions concentration [mg/L], contact time [minutes] and stirring speed [rpm] on the biosorption efficiency [%] were determined. The optimum solution pH for Pb2+ and Cd2+adsorption was 5.0 and peak adsorption of 91.33% and 82.53% for Pb2+ and Cd2+, respectively. 5 g/L Melina leaves were enough to achieve peak removal of both metal ions. The removal of the metal ions was comparatively quick, and stability was achieved after 30 minutes. The optimum stirring speed was 250 rpm for both metal ions. The uptake efficiency of the biosorbent was determined by Langmuir and Freundlich isotherm models. The value of Langmuir isotherm separation parameter [RL] of Pb2+ ion [0.0446 - 0.78125] and Cd2+ [0.1005- 0.9482] were within range of 0 -1 indicating favorable biosorption for both metal ions. The degree of non-linearity [n] values between Pb2+ [12.79] and Cd2+ [11.79] solution concentration and biosorption in Freundlich equation were greater than 1, indicating physical biosorption of Pb2+ and Cd2+ on to G. arborea leaves. G. arborea can serve as efficient biosorbent not only for Pb2+ and Cd2+ ions but also for other heavy metal ions in a wastewater stream

Adsorptive Removal of Pb(II) Ion from Aqueous Solution Using Rice Husk-Based Activated Carbon

2014 ◽  
Vol 875-877 ◽  
pp. 196-201 ◽  
Author(s):  
Mohd Faisal Taha ◽  
Ahmad S. Rosman ◽  
Maizatul S. Shaharun
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Rice Husk ◽  
Low Cost ◽  
Chemical Activation ◽  
Textural Properties ◽  
Activation Process ◽  
Adsorption Studies ◽  
Three Samples ◽  
Equilibrium Data

The potential of rice husk-based activated carbon as an alternative low-cost adsorbent for the removal of Pb (II) ion from aqueous solution was investigated. Rice husk-based activated carbon was preparedviachemical activation process using NaOH followed by the carbonization process at 500°C. Morphological analysis was conducted using field-emission scanning electron microscope /energy dispersive X-ray (FESEM/EDX) on three samples, i.e. raw rice husk, rice husk treated with NaOH and rice husk-based activated carbon. These three samples were also analyzed for their C, H, N, O and Si contents using CHN elemental analyzer and FESEM/EDX. The textural properties of rice husk-based activated carbon, i.e. surface area (253 m2/g) and pore volume (0.17 cm2/g), were determined by N2adsorption. The adsorption studies using rice husk-based activated carbon as an adsorbent to remove Pb (II) ion from aqueous solution were carried out at a fixed initial concentration of Pb (II) ion (150 ppm) with varying adsorbent dose as a function of contact time at room temperature. The concentration of Pb (II) ion was determined by atomic absorption spectrophotometer (AAS). The removal of Pb (II) ion from aqueous solution increased from 35 % to 82 % when the amount of rice husk-based activated carbon was increased from 0.05 g to 0.30 g. The equilibrium data obtained from adsorption studies was found to fit both Langmuir and Freundlich adsorption isotherms.

scholarly journals Characterization of Residual Biomasses and Its Application for the Removal of Lead Ions from Aqueous Solution

2019 ◽  
Vol 9 (21) ◽  
pp. 4486 ◽  
Author(s):  
Candelaria Tejada-Tovar ◽  
Angel Darío Gonzalez-Delgado ◽  
Angel Villabona-Ortiz
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
High Surface ◽  
High Surface Area ◽  
Freundlich Isotherm ◽  
Mesoporous Structure ◽  
Isotherm Models ◽  
Solution Ph ◽  
Batch Mode ◽  
Suitable Alternative

The removal of water pollutants has been widely addressed for the conservation of the environment, and novel materials are being developed as adsorbent to address this issue. In this work, different residual biomasses were employed to prepare biosorbents applied to lead (Pb(II)) ion uptake. The choice of cassava peels (CP), banana peels (BP), yam peels (YP), and oil palm bagasse (OPB) was made due to the availability of such biomasses in the Department of Bolivar (Colombia), derived from agro-industrial activities. The materials were characterized by ultimate and proximate analysis, Fourier Transform Infrared Spectroscopy (FTIR), Brunauer-Emmett-Teller analysis (BET), Scanning Electron Microscopy (SEM), and Energy Dispersive X-Ray Spectroscopy (EDS) in order to determine the physicochemical properties of bioadsorbents. The adsorption tests were carried out in batch mode, keeping the initial metal concentration at 100 ppm, temperature at 30 °C, particle size at 1 mm, and solution pH at 6. The experimental results were adjusted to kinetic and isotherm models to determine the adsorption mechanism. The remaining concentration of Pb(II) in solution was measured by atomic absorption at 217 nm. The functional groups identified in FTIR spectra are characteristic of lignocellulosic materials. A high surface area was found for all biomaterials with the exception of yam peels. A low pore volume and size, related to the mesoporous structure of these materials, make these bioadsorbents a suitable alternative for liquid phase adsorption, since they facilitate the diffusion of Pb(II) ions onto the adsorbent structure. Both FTIR and EDS techniques confirmed ion precipitation onto adsorbent materials after the adsorption process. The adsorption tests reported efficiency values above 80% for YP, BP, and CP, indicating a good uptake of Pb(II) ions from aqueous solution. The results reported that Freundlich isotherm and pseudo-second order best fit experimental data, suggesting that the adsorption process is governed by chemical reactions and multilayer uptake. The future prospective of this work lies in the identification of alternatives to reuse Pb(II)-contaminated biomasses after heavy metal adsorption, such as material immobilization.

scholarly journals Uptake of Cationic Dyes from Aqueous Solution by Biosorption onto GranularMuntingia calabura

2009 ◽  
Vol 6 (3) ◽  
pp. 737-742 ◽  
Author(s):  
T. Santhi ◽  
S. Manonmani ◽  
S. Ravi
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Cationic Dyes ◽  
Isotherm Models ◽  
Experimental Conditions ◽  
Experimental Parameters ◽  
Initial Ph ◽  
Rate Kinetics ◽  
Muntingia Calabura

A new, low cost, locally available biomaterial was tested for its ability to remove cationic dyes from aqueous solution. A granule prepared from a mixture of leafs, fruits and twigs ofMuntingia calaburahad been utilized as a sorbent for uptake of three cationic dyes, methylene blue (MB), methylene red (MR) and malachite green (MG). The effects of various experimental parameters (e.g.,contact time, dye concentration, adsorbent dose and pH) were investigated and optimal experimental conditions were ascertained. Above the value of initial pH 6, three dyes studied could be removed effectively. The isothermal data fitted the Langmuir and Freundlich isotherm models for all three dyes sorption. The biosorption processes followed the pseudo-first order rate kinetics. The results in this study indicated thatMuntingia calaburawas an attractive candidate for removing cationic dyes from the dye wastewater.

Sign in / Sign up

Export Citation Format

Share Document