scholarly journals Condensation of Indole with Isatin over AlCl3/Mesoporous Aluminosilicate

2015 ◽  
Vol 15 (1) ◽  
pp. 56-63
Author(s):  
Tri Esti Purbaningtias ◽  
Didik Prasetyoko ◽  
Hasliza Bahruji ◽  
Yusuf Muhammad Zein ◽  
Sugeng Triwahyono ◽  
...  

Aluminium chloride immobilized on mesoporous aluminosilicate was investigated as catalysts in the condensation of isatin with indole. AlCl3/mesoporous aluminosilicate (AlCl3/AM) catalysts were prepared by impregnation of 1, 5, 10 and 15 wt% AlCl3 on the surface of mesoporous aluminosilicate. A maximum conversion of isatin was achieved using 15% AlCl3/AM catalyst whereas the highest selectivity of 68.97% towards trisindoline was obtained using pure AM. The activity of the catalysts was depended on their acid site number and surface area. The number of Brønsted acid and the surface area affected to the conversion of isatin while the total acidity and the number of Lewis acid influenced the selectivity.

2019 ◽  
Vol 4 (2) ◽  
pp. 100
Author(s):  
Deasi Adhiani Farida ◽  
Abdulloh Abdulloh ◽  
Ahmadi Jaya Permana

ABSTRACT          Aluminosilicate can be used for cracking reaction. In this study, catalyst of H-aluminosilicate has been synthesized by hydrothermal method with ratio molar Si/Al is 20. The characterizations has been performed by XRD, FTIR and acidity test. Characterization by XRD showed that catalyst of H-aluminosilicate have structure amorphous, while FTIR showed Si-O-Al bond at 457 cm-1. The acidity test showed that catalyst of H-aluminosilicate have Brønsted acid site 0.0272 mmol/g and Lewis acid site 0.0005 mmol/g. Oleic acid was cracking at 340 oC for 3 and 5 hours. The product has been analyzed by GC-MS not showed compound forming biogasoline.Keywords: H-aluminosilicate, biogasoline, oleic acid ABSTRAK          Aluminosilikat dapat digunakan sebagai katalis dalam reaksi prengkahan. Pada penelitian ini telah dilakukan sintesis katalis H-aluminosilikat melalui metode hidrotermal dengan rasio Si/Al sebesar 20. Karakterisasi yang telah dilakukan meliputi uji XRD, FTIR, dan keasaman.Hasil XRD menunjukkan katalis H-aluminosilikat berbentuk amorf, sedangkan pada FTIR menunjukkan ikatan Si-O-Al pada bilangan gelombang 457 cm-1. Uji situs asam menunjukkan katalis H-aluminosilikat memiliki jumlah asam Brønsted sebesar 0.0272 mmol/g dan jumlah sisi asam Lewis sebesar 0.0005 mmol/g. Proses perengkahan asam oleat telah dilakukan pada suhu 340oC selama 3 jam dan 5 jam. Produk cracking yang diuji dengan GC-MS tidak menunjukkan pembentukan senyawa biogasoline.Kata kunci: H-aluminosilikat, biogasoline, asam oleat


2008 ◽  
Vol 470 (1-2) ◽  
pp. 36-39 ◽  
Author(s):  
Yonnathan Osorio Pérez ◽  
Liliam Alexandra Palomeque Forero ◽  
Diana Vanessa Cristiano Torres ◽  
Carlos Alexander Trujillo

2021 ◽  
Author(s):  
Sergio Rojas-Buzo ◽  
Benjamin Bohigues ◽  
Christian W. Lopes ◽  
Débora M. Meira ◽  
Mercedes Boronat ◽  
...  

The Brønsted/Lewis acid properties of Hf-MOF-808 can be tuned by simply controlling the solvent employed in its synthesis, with direct catalytic implications on the activity and selectivity of organic reactions sensitive to the active site nature.


2021 ◽  
Vol 395 ◽  
pp. 210-226
Author(s):  
Philip M. Kester ◽  
Jerry T. Crum ◽  
Sichi Li ◽  
William F. Schneider ◽  
Rajamani Gounder

Fuel ◽  
2021 ◽  
Vol 305 ◽  
pp. 121509
Author(s):  
Baikai Zhang ◽  
Wenzhi Li ◽  
Tingwei Zhang ◽  
Xu Li ◽  
Ajibola T. Ogunbiyi ◽  
...  

2021 ◽  
pp. 1-11
Author(s):  
Debasree Chanda ◽  
Gangothri M. Venkataswamy ◽  
Lagamawwa V. Hipparagi ◽  
Nanishankar V. Harohally

2005 ◽  
Vol 226 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Satoshi Kamiguchi ◽  
Satoru Nishida ◽  
Hideki Kurokawa ◽  
Hiroshi Miura ◽  
Teiji Chihara

Sign in / Sign up

Export Citation Format

Share Document