scholarly journals Pengaruh Jenis Asam dan Waktu Reaksi Pemanasan terhadap Karakteristik Produk Etanolisis PKO (Palm Kernel Oil)

2017 ◽  
Vol 37 (1) ◽  
pp. 70
Author(s):  
Murhadi Murhadi ◽  
Sri Hidayati ◽  
Ridwan Kurniawan
Keyword(s):  
Escherichia Coli ◽  
Saccharomyces Cerevisiae ◽  
Organic Acids ◽  
Succinic Acid ◽  
Ph Value ◽  
Palm Kernel ◽  
Heating Time ◽  
Reaction Products ◽  
Palm Kernel Oil ◽  
Kernel Oil

Production of ethanolisis product of Palm Kernel Oil (PKO) treatment with the addition of organic acids and different heating times have conducted. Effects of organic acids used and time of heating on characteristics of PKO ethanolisis product were studied. The organic acids used are succinic acid 40 % (w/v) and lactic acid 40 % (w/v). Heating time consists of 15, 30, 45 and 60 minutes. The pH value of the reaction products ranged from 4,88 (± 0,01) to 5,27 (± 0,02). The best antimicrobial activity of product reaction is by addition of succinic acid 40% (w/v) and heating for 30 minutes with zone of inhibitions (d, mm) against Staphylococus aureus ATCC 25923, Escherichia coli ATCC 25922, mixed cultures of natural microbial and Saccharomyces cerevisiae are 20,88 (± 0,50) mm, 25,64 (± 0,81) mm, 6,46 (± 0,24) mm, and 8,84 (± 0,08) mm, respectively. The average value of the power increase emulsion stability in coconut milk (water in oil, w/o) ranged from 5,20 (± 0,65) % to 20,00 (± 2,55) %. ABSTRAKProduksi produk etanolisis dari minyak inti sawit (Palm Kernel Oil, PKO) dengan perlakuan penambahan asam organik dan lama pemanasan yang berbeda telah dilakukan. Penelitian ini dilakukan untuk melihat pengaruh penambahan jenis asam dan lama pemanasan terhadap karakteristik produk etanolisis dari PKO. Asam organik yang digunakan adalah asam suksinat 40 % (b/b) dan asam laktat 40 % (b/b) serta lama pemanasan terdiri dari 15, 30, 45, dan 60 menit. Nilai pH produk reaksi berkisar antara 4,88 (± 0,01) sampai 5,27 (± 0,02). Aktivitas anti mikroba produk reaksi terbaik adalah dengan penambahan asam suksinat 40 % (b/b) dan pemanasan 30 menit dengan diameter (d; mm) zona hambat terhadap Staphylococus aureus ATCC 25923, Escherichia coli ATCC 25922, kultur campuran mikroba alami dan Saccharomyces cerevisiae, masing-masing 20,88 (± 0,50) mm, 25,64 (± 0,81) mm, 6,46 (± 0,24) mm, dan 8,84 (± 0,08) mm. Nilai rata-rata daya peningkatan stabilitas emulsi pada santan kelapa (water in oil, w/o) berkisar antara 5,20 (± 0,65) % hingga 20,00 (± 2,55) %.

scholarly journals Quality Parameters of Palm Olein, Palm Kernel Oil and its Blends Subjected to Thermal Stress using Photometric Technology

2020 ◽  
Vol 2 (5) ◽  
Author(s):  
O. B. Imoisi ◽  
M. E. Ukhun ◽  
E. E. Ikpe
Keyword(s):  
Thermal Stress ◽  
Fatty Acid ◽  
Palm Olein ◽  
Palm Kernel ◽  
Heating Time ◽  
Quality Parameters ◽  
Partial Replacement ◽  
Palm Kernel Oil ◽  
Kernel Oil ◽  
Totox Value

There is no much information regarding the partial replacement of palm olein with palm kernel oil. Palm olein mixed with palm kernel oil is commonly sold in Nigeria market today without proper blending and without determination of their suitability to consumer also ignorant of what ratio to be blended. Therefore, blends of palm olein (POL) and palm kernel oil (PKO) were formulated to assess their stability under elevated temperature using a fast, simple and reliable CDR palm oil tester photometric technology. The results were then compared with those obtained in POL. The blends studied were to investigate the effects of palm kernel oil partial replacement on the chemical stability of palm olein. the blends as partial replacement were missed in the ratio of PKO:POL(100:0), PKO:POL(80:20), PKO:POL(60:40) and POL:PKO(100:0), POL:PKO(80:20), POL:PKO(60:40). The POL, PKO and its blends were heated at 100, 150 and 200ᵒC. The time of heating were 20, 40 and 60mins respectively, making a total of 1 hour for heating without any frying operations. The physicochemical properties of the oil samples were fatty acid composition, free fatty acid, peroxide value, iodine value, anisidine value, cloud point, colour, melting point, viscosity and totox value were evaluated over heating time. Blending palm olein (POL) unsaturated oils with saturated (PKO) generally improved the parameters comparable to those demonstrated in palm olein (POL) and palm kernel oil alone. The result showed that as PKO was increased the concentration of saturated fatty acid also increased while unsaturated fatty acid decreased. Saturated oils were generally more stable to oxidation and less sensitive to thermal stress. Increase in the amount of PKO lead to reduction in FFA.

Kinetics Studies of Epoxidation and Oxirane Cleavage-Epoxidized Palm Kernel Oil

2020 ◽  
Vol 13 (3) ◽  
pp. 232-240
Author(s):  
Mohd Jumain Jalil ◽  
Aliff Farhan Mohd Yamin ◽  
Mohd Saufi Md Zaini ◽  
Veronique Gloria V. Siduru ◽  
Norhashimah Morad ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Reference Material ◽  
Palm Kernel ◽  
High Yield ◽  
Simulation Data ◽  
Kinetic Rate ◽  
Palm Kernel Oil ◽  
Kinetics Studies ◽  
Kernel Oil ◽  
Oxirane Cleavage

Background: Studies pertaining to the epoxidation of fatty acids, garnered much interest in recent years due to the rising demand of eco-friendly epoxides derived from vegetable oils. Methods: Epoxide is an important chemical precursor for the production of alcohols, glycols and polymers, like polyesters and epoxy resin. Epoxidation is the name given to the reaction when the double bonds are converted into epoxide. Results: Temperature at 55oC was used as a reference material in the epoxide process, as it produces a high yield epoxide being 88%. The kinetic rate of epoxidized palm kernel oil, k was obtained to be k11= 0.5125, k12= 0.05045, k21= 0.03185, k41= 0.01 and k51= 0.01243. Conclusion: Hence, by fitting the result with the experimental work and simulation, the summation of error being stimulated by I-sight simulation was 0.731116428 and the correlation between the experimental and simulation data was 0.925544.

scholarly journals Production of biolubricant samples from palm kernel oil using different chemical modification approaches

2021 ◽  
Author(s):  
Samuel O. Egbuna ◽  
Ukeh J. Nwachukwu ◽  
Chinedu M. Agu ◽  
Christain O. Asadu ◽  
Bernard Okolo
Keyword(s):  
Chemical Modification ◽  
Palm Kernel ◽  
Palm Kernel Oil ◽  
Kernel Oil

Stability of whippable oil-in-water emulsions: Effect of monoglycerides on crystallization of palm kernel oil

2013 ◽  
Vol 54 (2) ◽  
pp. 1738-1745 ◽  
Author(s):  
Merete B. Munk ◽  
Alejandro G. Marangoni ◽  
Hanne K. Ludvigsen ◽  
Viggo Norn ◽  
Jes C. Knudsen ◽  
...  
Keyword(s):  
Palm Kernel ◽  
Palm Kernel Oil ◽  
Kernel Oil ◽  
Oil In Water

Preparation of ethanol and palm oil/palm kernel oil alternative biofuels based on property improvement and particle size analysis

Fuel ◽  
2021 ◽  
Vol 305 ◽  
pp. 121569
Author(s):  
Chao Jin ◽  
Xin Liu ◽  
Tianyun Sun ◽  
Jeffrey Dankwa Ampah ◽  
Zhenlong Geng ◽  
...  
Keyword(s):  
Particle Size ◽  
Palm Oil ◽  
Oil Palm ◽  
Palm Kernel ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Palm Kernel Oil ◽  
Kernel Oil

Elaeis guineensis (African oil palm).

2021 ◽  
Author(s):  
Nick Pasiecznik
Keyword(s):  
East Asia ◽  
Palm Oil ◽  
Oil Palm ◽  
Palm Kernel ◽  
South East Asia ◽  
Palm Kernel Oil ◽  
Kernel Oil ◽  
Palm Species ◽  
Oil Palms ◽  
African Oil Palm

Abstract E. guineensis, the oil palm or African oil palm, is native to equatorial Africa, although the only other species in the genus (E. oleifera) is indigenous to South and Central America. E. guineensis, however, is the major economic species: fruits of E. oleifera have a much lower oil content and are used only locally (Westphal and Jansen, 1989). However, E. guineensis was introduced into South America during the time of the slave trade, and naturalized groves are reported in coastal areas of Brazil near Bélem. In the mid-1800s it was introduced to South-East Asia via the Botanic Gardens in Bogor, Indonesia. The first oil-palm estates in Sumatra (since 1911) and Malaysia (since 1917) used plant material from second- and third-generation descendants of the original Bogor palms, from which one of the breeding populations, the Deli Dura, is derived (Westphal and Jansen, 1989). After soyabean, E. guineensis is the second most important crop worldwide for the supply of edible vegetable oil. Palm oil kernel, for example, is a major agricultural export from Malaysia, and South-East Asia is the main area of production.E. guineensis yields two types of oil: palm oil from the fleshy mesocarp, and palm-kernel oil from the kernel, in a volume ratio 10:1. Most palm oil is used in food preparation (margarines, and industrial frying oils used to prepare snack foods, etc.). Palm-kernel oil is similar in composition and properties to coconut oil, and is used in confectionery, where its higher melting point is particularly useful. It is also used in the manufacture of lubricants, plastics, cosmetics and soaps. The oil palm is a monoecious, erect, single-stemmed tree usually 20-30 m high. The root system is shallow and adventitious, forming a dense mat in the top 35 cm of the soil. The main stem is cylindrical, up to 75 cm diameter. E. guineensis palm fronds are not as suitable for thatching as other palm species, as the leaflets attach to the rachis at two angles. The oil palm is indigenous to the lowland humid tropics, and thrives on a good moisture supply and relatively open conditions. It can tolerate fluctuating water-tables with periods of standing water, although continuously flooded conditions are unsuitable. Sites often selected as suitable for oil palm are swamps, riverbanks, or sites considered too moist for tropical rain forest trees. Rainfall is often the major factor limiting production in plantations: highest yields occur where rainfall is evenly distributed throughout the year, with an optimum of 150 mm per month (Westphal and Jansen, 1989). Oil palms can grow on a variety of soil types, from sandy soils to lateritic red and yellow podzols, young volcanic soils, alluvial clays and peat soils; water-holding capacity appears to be the most important soil criterion. It is a demanding crop in terms of soil nutrients. The oil palm also has potential for incorporation into agroforestry practices. Traditional oil palm management in some areas of West Africa often incorporated both pure oil palm groves (perhaps selectively retained), scattered oil palms within temporary fields, and unexploited oil palms in mixed forest (Gupta, 1993). Harvesting of fruits usually starts about 2½ years after field planting; bunches ripen throughout the year and so harvesting usually takes place at intervals of 2 to 3 weeks in any particular area. Because oil palm is so responsive to environmental conditions, yields may vary greatly. However, over the lifetime of a palm tree, yields generally rise to a maximum in the first 6-8 years (after field planting), and will subsequently decline slowly. In Malaysia and Sumatra, well-managed plantations yield between 24 and 32 tonnes/hectare of fruit bunches; the oil yield from this will be between 4.8 and 7 tonnes/hectare. Oil palm plantations are often regarded as a better use of the land than annual food crops in humid tropical areas where soils are prone to leaching: the plantations provide continuous ground cover, and the palm canopy helps protect against soil erosion. Oil palm stems are increasingly used as a raw material for paper and composite board production. This area has big prospects in wood-based industries. It is recommended that more research is undertaken into the properties and utilization. Propagation techniques, the management of pests and diseases, and genetic resources are other areas in which studies could usefully be undertaken.

Sign in / Sign up

Export Citation Format

Share Document