scholarly journals EFFECT OF PILE LENGTH ON SEISMIC RESPONSE OF CAISSON TYPE QUAY WALL RESTING ON PILE FOUNDATION

1999 ◽  
Vol 15 ◽  
pp. 285-290
Author(s):  
Tomiya TAKATANI ◽  
Yoshi-hiko MAENO
Keyword(s):  
Seismic Response ◽  
Pile Foundation ◽  
Quay Wall ◽  
Pile Length

scholarly journals REVIEW OF BEARING CAPACITY AND SETTLEMENT OF PILE FOUNDATION IN PORT INFRASTRUCTURE

Pondasi ◽  
2020 ◽  
Vol 23 (2) ◽  
pp. 1
Author(s):  
Adi Sunarno ◽  
Rinda Karlinasari ◽  
Abdul Rochim
Keyword(s):  
Bearing Capacity ◽  
Pile Foundation ◽  
Pile Group ◽  
Standard Penetration Test ◽  
Infrastructure Development ◽  
Lateral Deflection ◽  
Economic Progress ◽  
Port Infrastructure ◽  
Pile Length ◽  
Group Pile

ABSTRACTThe rapid infrastructure development is one of the indicators on the country economic progress. Indonesia as one of the largest archipelagic countries in the world, should be prioritized the port infrastructure to support the maritime. One of the government’s solutions is infrastructure development of Kuala Tanjung port. This research analyzed bearing capacity and settlement of single and group pile foundation on port infrastructure of Kuala Tanjung so it is known that the port is safe to use. The data used are Standard Penetration Test data with soil stratigraphy that is clay and sand. The type of foundation used is Concrete Spun Pile 1000 mm and 600 mm with a pile length of 36 meters. The data are then analyzed by manual calculation and Allpile 6.5E program based on Reese method and methods such as Vesic and Converse-Labarre. The results showed that single pile foundations of 1000 mm and 600 mm each had allowable capacity (Qall) 492.78-538.81 ton and 110.65-128.31 ton, with vertical load (Q) of 330.90 ton, settlement 0.56-1.17 cm and 3.32-3.64 cm, lateral deflection 27.50 cm and 94.90 cm. While the 1000 mm and 600 mm pile group foundations respectively have Qall 8717.31-10796.29 tons and 2059.25-2566.32 tons, with Q of 6618 tons, settlement 0.56-1.68 cm and 3.32-3.64 cm, lateral deflection of 2.49 cm and 19.49 cm. The conclusion of the research indicates that the safe pile foundation used is 1000 mm group pile foundation. Keywords: Bearing Capacity; Foundations; Pile Foundation; Port Infrastructure; Settlement

scholarly journals Bearing Characteristics of Composite Pile Group Foundations with Long and Short Piles under Lateral Loading in Loess Areas

2018 ◽  
Vol 2018 ◽  
pp. 1-17 ◽  
Author(s):  
Tianzhong Ma ◽  
Yanpeng Zhu ◽  
Xiaohui Yang ◽  
Yongqiang Ling
Keyword(s):  
Bearing Capacity ◽  
Pile Foundation ◽  
Horizontal Displacement ◽  
Pile Group ◽  
Lateral Load ◽  
Test Model ◽  
Pile Head ◽  
Load Bearing ◽  
Composite Pile ◽  
Pile Length

It is very necessary to research the bearing characteristics of composite pile group foundations with long and short piles under lateral load in loess areas, because these foundations are used widely. But few people researched this problem in loess areas up to now worldwide. In this paper, firstly, an indoor test model of a composite pile foundation with long and short piles is designed and then employed to explore the vertical load bearing characteristics and load transfer mechanisms of a single pile, a four-pile group, and a nine-pile group under different lateral loads. Secondly, ANSYS software is employed to analyze the load-bearing characteristics of the test model, and for comparison with the experimental results. The results demonstrate the following. (1) The lateral force versus pile head displacement curves of the pile foundation exhibit an obvious steep drop in section, which is a typical feature of piercing damage. A horizontal displacement limit of the pile foundation is 10 mm and 6mm for the ones sensitive to horizontal displacement. (2) The axial force along a pile and frictional resistance do not coincide, due to significant variations and discontinuities in the collapsibility of loess; a pile body exhibits multiple neutral points. Therefore, composite pile groups including both long and short piles could potentially maximize the bearing capacity and reduce pile settlement. (3) The distribution of stress and strain along the pile length is mainly concentrated from the pile head to a depth of about 1/3 of the pile length. If the lateral load is too large, short piles undergo rotation about their longitudinal axis and long piles undergo flexural deformation. Therefore, the lateral bearing capacity mainly relies on the strength of the soil at the interface with the pile or the horizontal displacement of the pile head.

scholarly journals Seismic Behavior of a Caisson Type Quay Wall Resting on Pile Foundation with Expanded Base

1998 ◽  
Vol 14 ◽  
pp. 71-76
Author(s):  
Tomiya Takatani ◽  
Yoshihiko Maeno ◽  
Hirosuke Kodama
Keyword(s):  
Pile Foundation ◽  
Seismic Behavior ◽  
Quay Wall

Dynamic and Static Study on Bearing Capacity of Reinforced Mixing Pile Composite Foundation

2012 ◽  
Vol 256-259 ◽  
pp. 612-615
Author(s):  
Gui Lin Sheng ◽  
Ya Ge Zhang
Keyword(s):  
Bearing Capacity ◽  
Seismic Response ◽  
Axial Stress ◽  
Bending Moment ◽  
Composite Foundation ◽  
Single Pile ◽  
Ultimate Capacity ◽  
Ansys Software ◽  
Length And Area ◽  
Pile Length

The axial stress and axial displacement distribution curves of reinforced mixing single pile are researched by ANSYS software; and the differences of the single pile ultimate capacity of reinforced mixing pile between different core pile length and area replacing ratio are analyzed; It compared and analyzed envelope diagrams of bending moment and shear of reinforced mixing pile in different core pile length and area replacing ratio under seismic response. Some conclusions which may be of some value for design and construction of reinforced mixing pile composite foundation are drawn

scholarly journals A Review on Effect of Pile Stiffness on Seismic Response of Structure

2021 ◽  
Vol 9 (12) ◽  
pp. 772-774
Author(s):  
Mohit Bharat Dange
Keyword(s):  
Seismic Response ◽  
Pile Foundation ◽  
Seismic Loading ◽  
Pile Foundations ◽  
Seismic Behaviour ◽  
Foundation Design ◽  
Earthquake Loads ◽  
Pile Cap ◽  
Seismic Forces ◽  
Shaky Ground

Abstract: Pile foundations are widely employed for a variety of structures on shaky ground. The importance of seismic design in ensuring the effective operation of a structure under severe seismic loading conditions cannot be overstated. For the analysis of seismic forces on a structure, IS 1893 will be employed. This research entails the choosing of a specific form of building structure. A comparison of buildings with and without pile foundations will be shown. Because of the differences in their properties, the seismic behaviour of the various structures differs. The influence of pile stiffness on the structure's seismic response will be investigated. The rigidity of the piling foundation could have an impact on the structure.With the rise in seismic activity, there may be a need for more efficient pile foundation design to withstand earthquake loads. The major goal of this study is to compare pile stiffness with changes in diameter and zone. Keywords: Pile Foundation, STAAD-Pro, Structure, Stiffness, zone, Pile Cap, Load Estimation, Pile cap, Pattern of Pile.

scholarly journals Research on the Design of Miniature Pile Foundation for Transmission Line

2019 ◽  
Vol 136 ◽  
pp. 02022
Author(s):  
Xinmin Yu ◽  
Xianri Wang
Keyword(s):  
Transmission Line ◽  
Bearing Capacity ◽  
Pile Foundation ◽  
Small Diameter ◽  
Diameter Ratio ◽  
Pile Diameter ◽  
Working Surface ◽  
Bored Piles ◽  
Pile Length ◽  
Small Working

Micro-pile is a kind of small diameter bored piles, also known as root pile, pile diameter is generally 150-400mm, length-diameter ratio is generally greater than 30,and pile length is usually not more than 30m. Compared with ordinary pile, micro-pile has the advantages of fast construction speed, small working surface, high bearing capacity and small settlement.

Sign in / Sign up

Export Citation Format

Share Document