scholarly journals EXPERIMENTAL STUDY ON LOAD-CARRYING CAPACITY OF NEW REBAR CONNECTION SYSTEM BETWEEN PRECAST CONCRETE MEMBERS

2019 ◽  
Vol 75 (1) ◽  
pp. 1-18
Author(s):  
Takeshi KITAMURA ◽  
Weijian ZHAO ◽  
Manabu HOSOTANI ◽  
Ichiro IWAKI
Keyword(s):  
Experimental Study ◽  
Carrying Capacity ◽  
Precast Concrete ◽  
Load Carrying Capacity ◽  
Concrete Members ◽  
Load Carrying ◽  
Connection System

A study into the ability of SPD to restore the buckling strength and modes of rib stiffened panels with simulated stress corrosion cracks

2017 ◽  
Vol 8 (1) ◽  
pp. 63-78 ◽  
Author(s):  
Rhys Jones ◽  
Neil Matthews ◽  
Daren Peng ◽  
Nicholas Orchowski
Keyword(s):  
Experimental Study ◽  
Stress Corrosion ◽  
Carrying Capacity ◽  
Particle Deposition ◽  
Load Carrying Capacity ◽  
Load Path ◽  
Premature Failure ◽  
Content Type ◽  
Buckling Strength ◽  
Load Carrying

Purpose The purpose of this paper is to describe the results of a combined numerical and experimental study into the ability of supersonic particle deposition (SPD) to restore the load carrying capacity of rib stiffened wing planks with simulated stress corrosion cracking (SCC). Design/methodology/approach In this context the experimental results reveal that SCC can result in a dramatic reduction in the load carrying capacity of the structure and catastrophic failure via cracking that tears the length of the structure through buckling. A combined numerical and experimental study then reveals how this reduction, in the load carrying capacity can be overcome by using SPD. Findings This paper is the first to show that SPD can be used to restore the load carrying capacity of rib stiffened structures with SCC. It also shows that SPD repairs can be designed to have only a minimal effect on the local stiffness and hence on the load path. However, care should be taken to ensure that the design is such that premature failure of the SPD does not occur. Originality/value This is the first paper to show that a thin layer of SPD deposited 7,075 aluminium alloy powder on either side of the SCC-simulated stiffener has the potential to restore the load carrying capability of a rib stiffened structure. As such it represents an important first step into establishing the potential for SPD to restore the buckling strength of rib stiffened wing panels containing SCC.

Experimental Study for Single-Angle Beam-Column Members Attached by one Leg

2010 ◽  
Vol 163-167 ◽  
pp. 433-438
Author(s):  
Xian Lei Cao ◽  
Ji Ping Hao ◽  
Chun Lei Fan
Keyword(s):  
Experimental Study ◽  
Finite Element ◽  
Carrying Capacity ◽  
Model Experiment ◽  
Ultimate Load ◽  
High Strength ◽  
Load Carrying Capacity ◽  
Compression Members ◽  
Load Carrying ◽  
Ultimate Load Carrying Capacity

To obtain a better understanding of the behavior and load-carrying capacity of Q460 high-strength single-angle compression members bolted by one leg, using static loading way to 48 angles carried out experimental study. The experiments show test specimens produce biaxial bending, most small slenderness ratio members are controlled by local buckling, and slender specimens are controlled by overall buckling. In addition to these factors in model experiment, influences of residual stresses on ultimate load-carrying capacity were analyzed by finite element numerical simulation analysis, the results show the residual stresses affect the ultimate load-carrying capacity of angles by about 5％ or less. Comparison of the load-carrying capacity of experimental and theoretical results indicate the difference of experimental and finite element values ranges from -9.99％ to +9.76％, American Design of Latticed Steel Transmission Structure (ASCE10-1997) and Chinese Code for Design of Steel Structures (GB50017-2003) underestimate separately the experimental load-carrying capacity by about 2.34％～33.93％ and 1.18％～63.3％, and the agreement is somewhat good between experimental program and the finite element analysis. Based on model experiment and simulated experiment, the formula of stability coefficient of single-angle compression members was established. It provides basic data for spreading Q460 high-strength single-angles members attached by one leg.

scholarly journals Calculation Method for Load-Carrying Capacity of Circular Reinforced Con

2021 ◽  
Vol 353 ◽  
pp. 01013
Author(s):  
Tingwei Wang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Carrying Capacity ◽  
Steel Tube ◽  
Experimental Result ◽  
Load Carrying Capacity ◽  
Model Method ◽  
Concrete Members ◽  
Load Carrying

Finite element method and fiber model method were used to calculate the load-carrying capacity of the specimens. Based on the experimental and theoretical analysis, simplified calculation method of the load-carrying capacity for this kind of member is proposed. It indicates that finite element method result is relatively small, fiber model method result accords well with the experimental result. Circular reinforced concrete members covered with steel tube presents both the characteristics of reinforced concrete and concrete filled steel tube member, showing higher load-carrying capacity and greater deformability. The load-carrying capacity of circular reinforced concrete members covered with steel tube can be calculated by the means of the method of reinforced concrete member with confined concrete. The result predicted by the simplified method is in good agreement with the experimental result.

scholarly journals Experimental Study on the Static Behavior of Reinforced Warren Circular Hollow Section (CHS) Tubular Trusses

2018 ◽  
Vol 8 (11) ◽  
pp. 2237 ◽  
Author(s):  
Wenwei Yang ◽  
Jiankang Lin ◽  
Ni-na Gao ◽  
Ruhao Yan
Keyword(s):  
Experimental Study ◽  
Carrying Capacity ◽  
Truss Structures ◽  
Load Carrying Capacity ◽  
Static Behavior ◽  
Hollow Section ◽  
Surface Plasticity ◽  
Load Carrying ◽  
Circular Hollow Section ◽  
Chord Member

For truss structures, the question of whether to weld hidden welds or not has been controversial. In the actual construction process of truss structures, the members are usually spot welded in place on the assembly platform, and then welded as a whole, while the hidden welds of the truss are not welded, especially for small pipe diameter trusses. Furthermore, in this study, under hidden weld unwelded conditions, two kinds of reinforcing method (adding a half outer sleeve on each joint and filling concrete into the chord members) are adopted to achieve the purpose of strengthening the truss. Therefore, this paper presents an experimental study on the static behavior of four types of Warren tubular trusses made of CHS members. These four types are (1) T-HW: The truss with hidden welds welded; (2) T-HN: The truss with hidden welds unwelded; (3) TS-AS: The truss strengthened on the basis of T-HN by adding a half outer sleeve on each joint; (4) TS-FC: The truss strengthened on the basis of T-HN by filling concrete into the top and bottom chord members. The mechanical behavior, failure mode, bearing capacity, and load-displacement of all specimens were investigated. The surface plasticity of the bottom chord member, the weld fracture around tubular joints at the bottom chord member, and the bending deformation of the bottom chord member were observed in the tests. Compared with the T-HW specimen, the load carrying capacity of the T-HN specimen decreased by 18%. On the other hand, the T-HN specimen has better deformability than the T-HW specimen. The reinforcing method of adding a half outer sleeve on each joint and filling concrete into the chord members can effectively improve the load carrying capacity and stiffness of the truss, thus reducing the overall deformation of the truss, but the reinforcing method of filling concrete into the chord members is more efficient.

Sign in / Sign up

Export Citation Format

Share Document