scholarly journals SLIP TESTS OF HIGH STRENGTH BOLTED JOINT ON THICK PLATE USING LARGE DIAMETER BOLT

2006 ◽  
Vol 62 (2) ◽  
pp. 267-278
Author(s):  
Kuniaki MINAMI ◽  
Takeshi MORI ◽  
Hidenobu HORIKAWA
Keyword(s):  
Thick Plate ◽  
Large Diameter ◽  
High Strength ◽  
Bolted Joint

The Applications of Vibratory Stress Relief in High-Strength Aluminum Alloy Thick Plate

2012 ◽  
Vol 430-432 ◽  
pp. 881-885
Author(s):  
Cai Jun Gan ◽  
Kai Liao
Keyword(s):  
Aluminum Alloy ◽  
Residual Stresses ◽  
Dimensional Stability ◽  
Strain Energy ◽  
Thick Plate ◽  
High Strength ◽  
Stress Relief ◽  
High Strength Aluminum Alloy ◽  
Mechanical Stretching ◽  
Stretching Process

The level and distribution of residual stresses have great impact on dimensional stability, while Vibratory Stress Relief (VSR) is an effective technology to relax or homogenize residual stresses. Experimental study on residual stresses distribution, residual strain energy and machining deformation of 7075 high-strength aluminum alloy thick plate under different aging process status shows that VSR can effectively decrease the amplitude and strain energy density, and enhance stability of dislocation structures and phase states in metal microscopic volume, then internal residual stresses are homogenized to enhance components’ anti-deformation capacity. In addition, the capability in maintaining dimensional stability from VSR is better than that from traditional mechanical stretching process

The Design, Development and Validation of an Innovative High Strength, Self Monitoring, Composite Pipe Liner for the Restoration of Energy Transmission Pipelines

2006 ◽  
Author(s):  
Kyle Bethel ◽  
Steven C. Catha ◽  
Melvin F. Kanninen ◽  
Randall B. Stonesifer ◽  
Ken Charbonneau ◽  
...  
Keyword(s):  
High Pressures ◽  
Large Diameter ◽  
Cylindrical Tube ◽  
High Strength ◽  
Design Development ◽  
Energy Transmission ◽  
Engineering Research ◽  
Wide Range ◽  
Transmission Pipelines

The research described in this paper centers on a composite of thermoplastic materials that can be inserted in a degraded steel pipe to completely restore its strength. Through the use of fabrics consisting of ultra high strength fibers that are co-helically wrapped over a thin walled thermoplastic cylindrical tube that serves as a core, arbitrarily high pressures can be achieved. This paper first outlines the design, manufacturing and installation procedures developed for this unique material to provide a context for the engineering research. Based on this outline, the technological basis that has been developed for assuring the strength and long term durability of this concept during its insertion, and in its very long term service as a liner in energy transmission pipelines, is presented in detail. The research that is described includes burst testing of the material in stand alone pipe form, load/elongation testing of ultra high strength fabrics, and linear and nonlinear elastic and viscoelastic analysis models. This body of work indicates that the concept is fundamentally feasible for restoring a wide range of large diameter natural gas and liquid transmission pipelines to be able to carry arbitrarily high pressures over very long lifetimes. It also indicates that liners can be safely installed in long lengths even in lines with severe bends in a continuous manner. With further research the concept has the potential for eliminating hydro testing and smart pigging during service, and could possibly be installed in some lines that are currently unpiggable.

Environmental effects on large diameter high-strength rods for structural applications

2018 ◽  
Vol 83 ◽  
pp. 230-238 ◽  
Author(s):  
Mihaela Iordachescu ◽  
Mariángel Pérez-Guerrero ◽  
Andrés Valiente ◽  
Manuel Elices
Keyword(s):  
Environmental Effects ◽  
Large Diameter ◽  
High Strength ◽  
Structural Applications

Sour-Service Risers and Accessories for HP/HT Application in the Gulf of Mexico

2021 ◽  
Vol 73 (03) ◽  
pp. 60-61
Author(s):  
Judy Feder
Keyword(s):  
High Pressure ◽  
Yield Strength ◽  
Gulf Of Mexico ◽  
Wall Thickness ◽  
Large Diameter ◽  
High Strength ◽  
Thick Wall ◽  
Offshore Technology ◽  
Riser Pipe ◽  
Sour Service

This article, written by JPT Technology Editor Judy Feder, contains highlights of paper OTC 30558, “Development and Implementation of Heavy-Wall, High-Strength, Sour-Service Accessory and Risers for HP/HT Application in the Gulf of Mexico,” by Carine Landier, Jonathas Oliveira, and Christelle Gomes, Vallourec, et al., prepared for the 2020 Offshore Technology Conference, originally scheduled to be held in Houston, 4–7 May. The paper has not been peer reviewed. Copyright 2020 Offshore Technology Conference. Reproduced by permission. As oil and gas development in the Gulf of Mexico increasingly requires high-pressure/high-temperature (HP/HT) applications, the need for sour-service (SS) resistance also has grown. To meet these needs, continual innovation and improvement is needed in SS-grade materials from a technical and cost-effectiveness perspective. The complete paper discusses the material properties achieved with several large-diameter, heavy-wall SS pipes. The complete paper presents a detailed, illustrated discussion of the applications for the high-strength SS pipe and its manufacturing process. Applications The authors write that improved materials to meet HP/HT requirements such as those in the Gulf of Mexico are needed particularly for two applications: for risers, which require high-strength, thick-wall sour service; and as a substitute for corrosion-resistant alloy (CRA) with sour carbon material on defined accessories. Vallourec has developed high-strength [125,000-psi specified minimum yield strength (SMYS)] and resistant carbon steel pipes in sizes with outer diameter (OD) up to 23 in. and wall thickness up to 2.5 in. These sizes are common in lower-strength material, but meeting the high-pressure requirements with higher-grade material enables cost savings and eliminates some CRA components. It also enables the use of much-lighter-weight pipe than the 80,000-psi SMYS material that is standard for SS applications in oversize OD and heavy wall. Risers. Most deepwater drilling is performed with classic subsea blowout-preventer (BOP) systems. Access to the well through the BOP is accomplished with low-pressure, large-diameter (19-in. internal diameter) drilling riser pipe. Pipes are supplied in weldable grades (API 5L X65–X80). Large-diameter forged flanges are then welded onto the tubes. Connections are made by multiple bolts. High pressures, required as part of the drilling process, are supplied by small-diameter choke-and-kill lines. This system has served the industry well, but, as well pressures increase, so have cost and feasibility requirements of subsea BOP technology. These costs, driven by the complexity of redundant systems, have driven a desire to explore an alternative solution—a surface BOP with high-pressure drilling riser pipe. Using a surface BOP reduces the complexity and cost of the system significantly because of the ability to inspect it. The drilling riser then carries the pressure to the surface and must be able to contain it. The high-pressure environment that instigated a new solution was based on a 15,000-psi well pressure with NACE Region 2 SS performance. Because of the requirement for weldable grades for attaching the flange as well as SS, the maximum yield strength has been limited to 80,000 psi. At that strength, a very high wall thickness is required to meet 15,000 psi and greater. This becomes very heavy and can be limited by the rig hook-load capacity. Alternatives in weldable grades are nickel-based alloys with SS performance. A full string, however, is prohibitively expensive.

Design of a Large Diameter Steel Reinforced Plastic Pipe

2011 ◽  
Author(s):  
Jun Shi ◽  
Jing Rao ◽  
Jianfeng Shi ◽  
Ping Xu ◽  
Taiqing Shao ◽  
...  
Keyword(s):  
Structural Parameters ◽  
Steel Wire ◽  
Large Diameter ◽  
Small Diameter ◽  
High Strength ◽  
External Pressure ◽  
Wire Mesh ◽  
Plastic Pipe ◽  
Reinforced Plastic ◽  
Steel Wire Mesh

A steel reinforced plastic pipe (PSP), which is composed of two layers of high density polyethylene (HDPE) matrix and a high strength steel wire mesh skeleton, has wide applications in many industrial areas, such as gas and petroleum transportation, etc. In order to achieve higher efficency and lower costs, a large diameter PSP has been developed. However, requirements of the large diameter PSP in safety and economy are much higher, compared with those small diameter PSPs, and some potential problems should be taken into account. In this paper, relevant structural parameters of the large diameter PSP are determined, based on a previously proposed model, and a short-term burst test is carried out. The experiment results agree with the theoretical results quite well. Subsequently, the resistance of vertical pressure and uniform external pressure are evaluated by using experiment investigation and finite element method, respectively. And corresponding results indicate the large diameter PSP with determined structural parameters is qualified to use.

Application of Tensile Strain Models to Multiple Grades of Pipelines

2014 ◽  
Author(s):  
Wenwei Zhang ◽  
Zhenyong Zhang ◽  
Jinyuan Zhang ◽  
Peng Yang
Keyword(s):  
Tensile Strain ◽  
Large Diameter ◽  
High Strength ◽  
Slope Movement ◽  
Experimental Database ◽  
Mine Subsidence ◽  
The Past ◽  
Discontinuous Permafrost ◽  
China National Petroleum Corporation ◽  
Tensile Strain Capacity

China National Petroleum Corporation (CNPC) has constructed large-diameter high-strength pipelines (X70 and X80) in the past decades in areas of seismic activities, mine subsidence, and slope movement using strain-based design (SBD) technology. More pipelines being constructed now traverse regions of active seismic activities, mine subsidence, slope movement, and discontinuous permafrost. CNPC is also interested in moving to linepipe grades higher than X80. In view of the recent development of various tensile strain models, work was undertaken to evaluate those models and determine the most appropriate models for current and future applications. In this paper, selected tensile strain models are reviewed and evaluated against an experimental database. The database of 80 tests from public-domain publications contains both full-scale pipe tests and curved wide plate tests with 46 tests from high strength pipes (X80 and above). The calculated tensile strain capacity from the selected models was compared with the test data. The models were evaluated and the applicability of the models to the linepipes of different strength levels was discussed.

Sign in / Sign up

Export Citation Format

Share Document