scholarly journals Predicting UHPC Structural Response at Ultimate Limit State through Numerical Simulation Technique

2019 ◽  
Author(s):  
Mandeep Pokhrel ◽  
Matthew J. Bandelt
Keyword(s):  
Numerical Simulation ◽  
Limit State ◽  
Structural Response ◽  
Simulation Technique ◽  
Ultimate Limit State ◽  
Ultimate Limit ◽  
Numerical Simulation Technique

scholarly journals Structural Phenomenon of Cement-Based Composite Elements in Ultimate Limit State

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
I. Iskhakov ◽  
Y. Ribakov
Keyword(s):  
Limit State ◽  
Structural Response ◽  
Minimax Principle ◽  
Ultimate Limit State ◽  
Spatial Structures ◽  
Design Concepts ◽  
Dynamic Loadings ◽  
Ultimate Limit ◽  
Additional Equation ◽  
Theoretical Results

Cement-based composite materials have minimum of two components, one of which has higher strength compared to the other. Such materials include concrete, reinforced concrete (RC), and ferrocement, applied in single- or two-layer RC elements. This paper discusses experimental and theoretical results, obtained by the authors in the recent three decades. The authors have payed attention to a structural phenomenon that many design features (parameters, properties, etc.) at ultimate limit state (ULS) of a structure are twice higher (or lower) than at initial loading state. This phenomenon is evident at material properties, structures (or their elements), and static and/or dynamic structural response. The phenomenon is based on two ideas that were developed by first author: quasi-isotropic state of a structure at ULS and minimax principle. This phenomenon is supported by experimental and theoretical results, obtained for various structures, like beams, frames, spatial structures, and structural joints under static or/and dynamic loadings. This study provides valuable indicators for experiments’ planning and estimation of structural state. The phenomenon provides additional equation(s) for calculating parameters that are usually obtained experimentally and can lead to developing design concepts and RC theory, in which the number of empirical design coefficients will be minimal.

scholarly journals Ultimate Limit State Analysis of Ship Structures

2019 ◽  
Author(s):  
S Sathish Kumar
Keyword(s):  
Ultimate Load ◽  
Progressive Collapse ◽  
Limit State ◽  
Structural Response ◽  
Load Factor ◽  
Ultimate Limit State ◽  
Ship Structures ◽  
Limit State Analysis ◽  
Ultimate Limit ◽  
State Analysis

Subjective and objective uncertainties are imposed on ship structures due to the random nature of the loading environment, inadequate knowledge of physical phenomena associated with loads or deviations in material properties which make reliable predictions of structural response a difficult task. Strength criteria for ships can be established by ultimate strength studies of progressive collapse analysis of finite element models under different boundary conditions with combined geometric and material nonlinearities. Load-Displacement and/or Moment-Curvature curves can be generated and the ultimate load causing failure identified as a multiple of the design load. Ultimate limit state analysis can be carried out for various combinations of parameters to identify the ultimate load factor in each case.

scholarly journals Assessment of Buckling Behaviour on an FPSO Deck Panel

2020 ◽  
Vol 27 (3) ◽  
pp. 50-58 ◽  
Author(s):  
Ozgur Ozguc
Keyword(s):  
Finite Element ◽  
Limit State ◽  
Practical Interest ◽  
Structural Response ◽  
Ultimate Limit State ◽  
Imperfection Sensitivity ◽  
Stiffened Panels ◽  
Structural Capacity ◽  
Response Subject ◽  
Ultimate Limit

AbstractStiffened plates are the main structural building block in ship and offshore hulls and their structural response subject to loads is a topic of significant practical interest in ship and offshore structural design. To investigate the structural capacity for design and evaluation purposes, it is becoming an efficient and reliable practice to carry out non-linear finite element (FE) analysis. The present study is to assess the buckling strength of a stiffened deck panel on an FPSO vessel using the nonlinear finite element code ADVANCE ABAQUS, where imperfection sensitivity work is also accounted for. The cases studied correspond to in-plane bi-axial compression in the two orthogonal directions. The findings are compared with the DNVGL PULS (Panel Ultimate Limit State) buckling code for the stiffened panels. It is found that the strength values from the ADVANCE ABAQUS and DNVGL PULS code are very close. The results and insights developed from the present work are discussed in detail.

Combined Reinforced Concrete Columns Strengthening with Steel Clipping and Concrete Surfacing

2021 ◽  
pp. 11-22
Author(s):  
Ю. Г. Москалькова ◽  
С. В. Данилов ◽  
В. А. Ржевуцкая
Keyword(s):  
Reinforced Concrete ◽  
Load Transfer ◽  
Limit State ◽  
Concrete Columns ◽  
Ultimate Limit State ◽  
Concrete Core ◽  
Reinforced Concrete Columns ◽  
Entire Height ◽  
Complex Structural ◽  
Ultimate Limit

Постановка задачи. Исследуется метод усиления железобетонных колонн устройством стальной обоймы с обетонированием, который позволяет восстанавливать эксплуатационные показатели колонн, имеющих значительные дефекты и повреждения. Предпосылкой настоящих исследований явилось предположение о том, что усиление стальной обоймой с обетонированием является эффективным способом повышения несущей способности железобетонных колонн, причем вариант приложения нагрузки - только на бетонное ядро или ко всему сечению - существенно на эффективность усиления не влияет. В связи с этим целью исследования является определение необходимости устройства стального оголовка и включения в работу ветвей стальной обоймы при условии обетонирования стержня колонны по всей высоте. Результаты и выводы. Рациональным признан способ передачи нагрузки только на бетонное ядро усиленных колонн, поскольку устройство оголовка стальной обоймы требует применения сложных конструктивно-технологических решений, но при этом дополнительно увеличивает несущую способность незначительно (согласно проведенным исследованиям менее чем на 10 %). Ввиду отсутствия необходимости устройства конструкций стального оголовка снижаются трудоемкость и сроки производства работ по усилению колонн. Statement of the problem. The method of strengthening reinforced concrete columns with a steel clipping and the concrete surfacing is investigated. This method allows one to repair the columns with significant defects and damage. The prerequisite for this study was the assumption of strengthening with a steel clipping and the concrete surfacing is an effective way to increase the ultimate limit state of reinforced concrete columns, furthermore, the option of applying the load (only to the concrete core or to the entire section) does not significantly affect the strengthening effectiveness. In this regard, the purpose of the investigation was to identify the need to include the steel jacketing in the work, on the condition the column is coated with concrete along with the entire height. Results and conclusions. The load transfer method only to the concrete core of the strengthened columns is recognized as rational since the device of the steel clipping head requires the use of complex structural and technological solutions, but at the same time additionally increases the ultimate limit state insignificantly (according to the studies by less than 10 %). Due to the absence of the need to establish structures of the steel jacketing head, the labor intensiveness and terms of work production on strengthening the columns are reduced.

Application potential of textile reinforcement in concrete construction for infrastructure buildings: environmental performance and availability

2021 ◽  
Author(s):  
Sara Reichenbach ◽  
Benjamin Kromoser ◽  
Philipp Preinstorfer ◽  
Tobias Huber
Keyword(s):  
High Performance ◽  
Construction Material ◽  
Limit State ◽  
Carbon Dioxide Emission ◽  
Resource Consumption ◽  
Ultimate Limit State ◽  
Textile Reinforced Concrete ◽  
Potential Applications ◽  
Application Potential ◽  
Ultimate Limit

<p>With the building industry being one of the main sources of carbon dioxide emission worldwide and concrete being the main construction material, new strategies have to be developed to reduce the carbon footprint thereof. The use of high-performance materials in structural concrete, as for example textile-reinforced concrete (TRC), seems to allow for a reduction of the resource consumption and the carbon emissions. The present paper addresses potential applications of TRC examining the global warming potential (GWP) of a rail platform barrier. The resource consumption is depicted in a parametrical study in terms of the necessary component height and reinforcement area considering both the serviceability limit state (SLS) as well as the ultimate limit state (ULS). The results clearly indicate an achievable reduction of the GWP during construction when using textile reinforcement made of high-performance fibres. Furthermore, an analysis of the European market was conducted to prove the availability of this new reinforcement type. </p>

Sign in / Sign up

Export Citation Format

Share Document