scholarly journals Topology Optimization of Acetabular Cup by Finite Element Simulation

2020 ◽  
Vol 5 (2) ◽  
pp. 22-34
Author(s):  
Muhammad Ahmed Abdullah
Keyword(s):  
Finite Element ◽  
Hip Replacement ◽  
Acetabular Cup ◽  
Element Analysis ◽  
Potential Health ◽  
Element Simulation ◽  
Constant Friction ◽  
Wear And Tear ◽  
Hip Replacements ◽  
Computer Based

Hip replacements typically consist of a four-part piece. Our research will focus primarily on the acetabular component. Several different types of materials can be used when creating a hip replacement implant ranging from plastic to titanium. Different materials are used to accommodate for allergic reactions or circumventing potential health risks. Aside from the material, the size of the components plays a factor in terms of durability; a larger diameter head might avoid dislodgement though it could increase wear and tear on the stems through constant friction. A patient’s force applied to the hip replacement is usually measured through a number of physical assessments. Finite element analysis (FEA), a computer-based method of data observation, allows for us to accurately simulate hip forces and their impact on the hip replacements. Through this, it becomes easier to predict and calculate the performance of specific designs. Generative systems can also be used to support performance analysis and optimization through assessing a multitude of cases, many of which apply in real-world scenarios. By applying both systems, we designed and modeled an acetabular cup that when measured decreased the mass from 129 grams initially down to 52 grams, a 60% decrease in total mass. Furthermore, the design we created lessened the trauma on the piece through distributing force across the entirety of the piece rather than specific segments only. This shows an increased durability and life expectancy when compared to usual acetabular cups.

scholarly journals Mechanical Design and Finite element Analysis for Acetabular cup

2019 ◽  
Vol 4 (4) ◽  
pp. 23-35
Author(s):  
Abdullah Muhammad Admed
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Hip Replacement ◽  
Mechanical Design ◽  
Acetabular Cup ◽  
Element Analysis ◽  
Potential Health ◽  
Wear And Tear ◽  
Hip Replacements ◽  
Computer Based

Hip replacements typically consist of a four-part piece. Our research will focus primarily on the acetabular component. Several different types of materials can be used when creating a hip replacement implant ranging from plastic to titanium. Different materials are used to accommodate for allergic reactions or circumventing potential health risks. Aside from the material, the size of the components plays a factor in terms of durability; a larger diameter head might avoid dislodgement though it could increase wear and tear on the stems through constant friction. A patient’s force applied to the hip replacement is usually measured through a number of physical assessments. Finite element analysis (FEA), a computer-based method of data observation, allows for us to accurately simulate hip forces and their impact on the hip replacements. Through this, it becomes easier to predict and calculate the performance of specific designs. Generative systems can also be used to support performance analysis and optimization through assessing a multitude of cases, many of which apply in real-world scenarios. By applying both systems, we designed and modeled an acetabular cup that when measured decreased the mass from 129 grams initially down to 52 grams, a 60% decrease in total mass. Furthermore, the design we created lessened the trauma on the piece through distributing force across the entirety of the piece rather than specific segments only. This shows an increased durability and life expectancy when compared to usual acetabular cups.

scholarly journals Finite element analysis of polyethylene wear in total hip replacement: A literature review

2019 ◽  
Vol 233 (11) ◽  
pp. 1067-1088 ◽  
Author(s):  
Lin Wang ◽  
Graham Isaac ◽  
Ruth Wilcox ◽  
Alison Jones ◽  
Jonathan Thompson
Keyword(s):  
Finite Element ◽  
Literature Review ◽  
Hip Replacement ◽  
Material Selection ◽  
Polyethylene Wear ◽  
Element Analysis ◽  
Total Hip ◽  
Total Hip Replacements ◽  
Hip Replacements ◽  
Modelling Techniques

Evaluation and prediction of wear play a key role in product design and material selection of total hip replacements, because wear debris is one of the main causes of loosening and failure. Multifactorial clinical or laboratory studies are high cost and require unfeasible timeframes for implant development. Simulation using finite element methods is an efficient and inexpensive alternative to predict wear and pre-screen various parameters. This article presents a comprehensive literature review of the state-of-the-art finite element modelling techniques that have been applied to evaluate wear in polyethylene hip replacement components. A number of knowledge gaps are identified including the need to develop appropriate wear coefficients and the analysis of daily living activities.

Analysis of magnetic force and dynamic characteristic for non-contact permanent magnet linear drive device

2020 ◽  
Vol 64 (1-4) ◽  
pp. 1337-1345
Author(s):  
Chuan Zhao ◽  
Feng Sun ◽  
Junjie Jin ◽  
Mingwei Bo ◽  
Fangchao Xu ◽  
...  
Keyword(s):  
Finite Element ◽  
Permanent Magnet ◽  
Dynamic Characteristic ◽  
Driving Force ◽  
Magnetic Circuit ◽  
Response Speed ◽  
Computation Method ◽  
Element Analysis ◽  
Element Simulation ◽  
The Relationship

This paper proposes a computation method using the equivalent magnetic circuit to analyze the driving force for the non-contact permanent magnet linear drive system. In this device, the magnetic driving force is related to the rotation angle of driving wheels. The relationship is verified by finite element analysis and measuring experiments. The result of finite element simulation is in good agreement with the model established by the equivalent magnetic circuit. Then experiments of displacement control are carried out to test the dynamic characteristic of this system. The controller of the system adopts the combination control of displacement and angle. The results indicate that the system has good performance in steady-state error and response speed, while the maximum overshoot needs to be reduced.

Redrawing Operation a Star Shape from Cylindrical Shape Using Experimental and FE Analysis

2020 ◽  
Vol 38 (1A) ◽  
pp. 25-32
Author(s):  
Waleed Kh. Jawad ◽  
Ali T. Ikal
Keyword(s):  
Finite Element ◽  
Effective Strain ◽  
Element Model ◽  
Cylindrical Shape ◽  
Element Analysis ◽  
Punch Force ◽  
Maximum Value ◽  
Element Simulation ◽  
Blank Sheet ◽  
The Finite Element Model

The aim of this paper is to design and fabricate a star die and a cylindrical die to produce a star shape by redrawing the cylindrical shape and comparing it to the conventional method of producing a star cup drawn from the circular blank sheet using experimental (EXP) and finite element simulation (FES). The redrawing and drawing process was done to produce a star cup with the dimension of (41.5 × 34.69mm), and (30 mm). The finite element model is performed via mechanical APDL ANSYS18.0 to modulate the redrawing and drawing operation. The results of finite element analysis were compared with the experimental results and it is found that the maximum punch force (39.12KN) recorded with the production of a star shape drawn from the circular blank sheet when comparing the punch force (32.33 KN) recorded when redrawing the cylindrical shape into a star shape. This is due to the exposure of the cup produced drawn from the blank to the highest tensile stress. The highest value of the effective stress (709MPa) and effective strain (0.751) recorded with the star shape drawn from a circular blank sheet. The maximum value of lamination (8.707%) is recorded at the cup curling (the concave area) with the first method compared to the maximum value of lamination (5.822%) recorded at the cup curling (the concave area) with the second method because of this exposure to the highest concentration of stresses. The best distribution of thickness, strains, and stresses when producing a star shape by

Finite Element Simulation of Stable Fatigue Crack Growth Using Critical CTOD Determined by Preliminary Finite Element Analysis

2014 ◽  
Vol 891-892 ◽  
pp. 1675-1680
Author(s):  
Seok Jae Chu ◽  
Cong Hao Liu
Keyword(s):  
Finite Element ◽  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Finite Element Simulation ◽  
Crack Growth ◽  
Crack Tip ◽  
Stress Intensity Factor Range ◽  
Crack Tip Opening Displacement ◽  
Element Analysis ◽  
Element Simulation

Finite element simulation of stable fatigue crack growth using critical crack tip opening displacement (CTOD) was done. In the preliminary finite element simulation without crack growth, the critical CTOD was determined by monitoring the ratio between the displacement increments at the nodes above the crack tip and behind the crack tip in the neighborhood of the crack tip. The critical CTOD was determined as the vertical displacement at the node on the crack surface just behind the crack tip at the maximum ratio. In the main finite element simulation with crack growth, the crack growth rate with respect to the effective stress intensity factor range considering crack closure yielded more consistent result. The exponents m in the Paris law were determined.

Finite Element Analysis of the ESTELA M1 Airplane Firewall (Representative Specimen)

2011 ◽  
Author(s):  
V. Ramirez-Elias ◽  
E. Ledesma-Orozco ◽  
H. Hernandez-Moreno
Keyword(s):  
Finite Element ◽  
Federal Aviation Administration ◽  
Element Model ◽  
Maximum Load ◽  
Load Factor ◽  
Representative Specimen ◽  
Maximum Displacement ◽  
Element Analysis ◽  
Element Simulation ◽  
The Relationship

This paper shows the finite element simulation of a representative specimen from the firewall section in the AEROMARMI ESTELA M1 aircraft. This specimen is manufactured in glass and carbon / epoxy laminates. The specimen is subjected to a load which direction and magnitude are determined by a previous dynamic loads study [10], taking into account the maximum load factor allowed by the FAA (Federal Aviation Administration) for utilitarian aircrafts [11]. A representative specimen is manufactured with the same features of the firewall. Meanwhile a fix is built in order to introduce the load directions on the representative specimen. The relationship between load and displacement is plotted for this representative specimen, whence the maximum displacement at the specific load is obtained, afterwards it is compared with the finite element model, which is modified in its laminate thicknesses in order to decrease the deviation error; subsequently this features could be applied to perform the whole firewall analysis in a future model [10].

scholarly journals Strength Training Characteristics of Different Loads Based on Acceleration Sensor and Finite Element Simulation

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 647
Author(s):  
Bo Pang ◽  
Zhongqiu Ji ◽  
Zihua Zhang ◽  
Yunchuan Sun ◽  
Chunmin Ma ◽  
...  
Keyword(s):  
Finite Element ◽  
Knee Joint ◽  
Evaluation System ◽  
Bench Press ◽  
Element Analysis ◽  
Element Simulation ◽  
The Finite Element Analysis ◽  
Intensity Of Exercise ◽  
Deep Squat ◽  
Main Factor

Deep squat, bench press and hard pull are important ways for people to improve their strength. The use of sensors to measure force is rare. Measuring strength with sensors is extremely valuable for people to master the intensity of exercise to scientifically effective exercise. To this end, in this paper, we used a real-time wireless motion capture and mechanical evaluation system of the wearable sensor to measure the dynamic characteristics of 30 young men performing deep squat, bench press and hard pull maneuvers. The data of tibia were simulated with AnyBody 5.2 and ANSYS 19.2 to verify the authenticity. The result demonstrated that the appropriate force of the deep squat elbow joint, the hip joint and the knee joint is 40% 1RM, the appropriate force of the bench press is 40% 1RM and the appropriate force of the hard pull is 80% 1RM. The external force is the main factor of bone change. The mechanical characteristics of knee joint can be simulated after the Finite Element Analysis and the simulation of AnyBody model are verified.

Investigation on endurance evaluation of a portal crane: experimental, theoretical and finite element analysis

2020 ◽  
Vol 62 (4) ◽  
pp. 357-364
Author(s):  
Yusuf Aytaç Onur ◽  
Hakan Gelen
Keyword(s):  
Finite Element ◽  
Critical Points ◽  
Maximum Stress ◽  
Strain Gages ◽  
Finite Element Analyses ◽  
Element Analysis ◽  
Element Simulation ◽  
Main Girder ◽  
Stressed Component ◽  
Portal Crane

Abstract In this study, the stress on portal crane components at various payloads has been investigated theoretically, numerically and experimentally. The portal crane was computer-aided modeled and finite element analyses were performed so that the most stressed points at the each trolley position investigated on the main girder could be determined. In addition, the critical points were marked on the portal crane, and strain gages were attached to the those critical points so that stress values could be experimentally determined. The safety factor values at different payloads were determined by using finite element simulation. Results indicate that the most stressed component in the examined portal crane is the main girder. Experimental results indicate that the maximum stress value on the main girder is 3.05 times greater than the support legs and 8.99 times larger than the rail.

Sign in / Sign up

Export Citation Format

Share Document