scholarly journals Business process development with the application of simulation technique

2017 ◽  
Vol 2 (3) ◽  
pp. 109-118
Author(s):  
László Pusztai ◽  
Balázs Kocsi ◽  
István Budai

The object of our work to increase production efficiency with the use of cost-efficient development tools at a Hungarian small enterprise. We apply data gathering techniques besides process modelling and diagnostic methods to reduce the total process time of the assembly process so as to induce cost reduction in the production. In this respect we investigate and rank root causes of wastes by cost-effective process development tools, like timebased FMEA (failure mode and effects analysis) as well as the 5 whys method. With the use of Monte-Carlo simulation companies can evaluate the change in the process, therefore, they can decide whether they want to carry out corrective measures or not. The accomplished changes can generate increasing competitive edge in the long run.

Author(s):  
A. H. Abdul Rasib Et. al.

Companies in manufacturing often find strategies to increase production efficiency and quality to be competitive in the long run. These strategies make companies remain profitable in a highly competitive market. Nonetheless, attempting to maintain a shorter production lead time is also vital as efficiency becomes a competitive priority. Whenever there are longer lead times, overtime is taken into account to meet the target. Overtime can be the most cost-effective way for companies to achieve their quality needs. Nevertheless, if poorly managed, overtime could quickly outstrip financial gains. This study aimed to establish the manufacturing industry model of non-value-added overtime (NAO) and formulate NAO equations. In this regard, the NAO equations were acquired from the critical factors of NAO. The vital aspects of NAO were then presented through the activities flow in the input/output manufacturing concept. The study results indicated that the highest critical factors contributed to the three processes: pre-process, in-process, and post-process.


2012 ◽  
Vol 628 ◽  
pp. 206-210 ◽  
Author(s):  
Jia Liang Zhang ◽  
Bei Zhi Li ◽  
Xin Chao Zhang ◽  
Qing Xia Wang

Friction stir welding processes involve many variables. Engineers and operators often find it difficult to effectively design or control it. The objective of this work is to develop a friction stir welding platform of thin plates to improve welding quality and to increase production efficiency. The study is conducted by using finite element modeling and temperature field analysis technology to obtain optimization parameters, and using virtual instrument, multi-sensor data fusion to monitor the force of the stirring spindle. Experiment results show that the developed platform can reach the requirements of processing quality and is cost-effective.


2020 ◽  
Vol 6 (3) ◽  
pp. 180-191
Author(s):  
Kavitha Chandrasekaran

Background:: In the long run, synthetic tints were found to be harmful to the chemicals. As a result natural tints have come to be used for their many intrinsic values. The main reason being, then availability of local plants as the main source of natural colorants. Their easy availability in the country being zero cost – effective and planted for other purposes are the main reasons for utilizing them as natural tints. Almost all the parts of the plants, namely stem, leaves, fruits, seeds, barks etc. are used for extracting natural colour. In addition, they are antimicrobial antifungal, insect – repellant deodorant, disinfectant having medicinal values. Methods:: Sweet Indrajao leaves were cleaned by washing with water and dried under direct sunlight and ground as fine powder. A fine strainer was used to remove the wastages. After all these processes, 1-kilogram leaves weighed 318 grams. Then, it is put in 75% ethanol 25% water and heated in a breaker which in kept over a water bath for 2 hours. After this, the contents were filtered and kept in a separate beaker. Bleached fleece draperies stained with stain extract were made to become wet and put into different stain baths which contain the required amount of stain extract and water. Acetic acid was added to it after 20 minutes. The fleece drapery was stained for about one hour at 60oC. The draperies thus stained were removed, squeezed, and put to treatment with metal salts without washing. Different metal salts were used for the treatment using 3% of any one of the chemical mordants like alum, stannous chloride, potassium dichromate, ferrous sulphate, nickel sulphate, copper sulphate and natural mordants such as myrobolan, turmeric, cow dung, Banana sap juice at 60oC for 30 minutes with MLR of 1:30. The stained draperies were washed repeatedly in all the three methods in water and dried in air. At last, the stained draperies were put to soap with soap solution at 60oC for 10 minutes. The draperies were repeatedly washed in water and dried under the sun. Results:: Sweet Indrajao leaves discharged colour easily in alcoholic water. The fleece draperies were stained with chemical and natural mordants. It was observed that the stain uptake was found to be good in post-mordanting method. Ultrasonication has clearly improved the stainability of the draperies at pH 3 and 3.5 values. The pH decreases the stain ability under both Conventional and Ultrasonic conditions. The colour strength increases with an increase in staining temperature in both cases of US and CH methods. Conclusion:: Sweet Indrajao.L has been found to have good ultrasonic potential as a stain plant. The stain uptake as well as the fastness properties of the fleece drapery were found to enhance when metal mordant was used in conjugation with ultra-sonication for the extract of Sweet Indrajao. It was also found that the enhancement of staining ability was better without mordant draperies. The dye extract showed good antibacterial activity against the three bacterial pathogens. Among the three bacterial pathogens, dye extract showed more effective against Escherichia coli pathogens and dye extract showed more effective against Aspergillus pathogens. Hence, the ultrasonic method of drapery staining may be appropriate and beneficial for society at large in future.


2021 ◽  
Vol 13 (14) ◽  
pp. 7998
Author(s):  
Maxime Binama ◽  
Kan Kan ◽  
Hui-Xiang Chen ◽  
Yuan Zheng ◽  
Daqing Zhou ◽  
...  

The utilization of pump as turbines (PATs) within water distribution systems for energy regulation and hydroelectricity generation purposes has increasingly attracted the energy field players’ attention. However, its power production efficiency still faces difficulties due to PAT’s lack of flow control ability in such dynamic systems. This has eventually led to the introduction of the so-called “variable operating strategy” or VOS, where the impeller rotational speed may be controlled to satisfy the system-required flow conditions. Taking from these grounds, this study numerically investigates PAT eventual flow structures formation mechanism, especially when subjected to varying impeller rotational speed. CFD-backed numerical simulations were conducted on PAT flow under four operating conditions (1.00 QBEP, 0.82 QBEP, 0.74 QBEP, and 0.55 QBEP), considering five impeller rotational speeds (110 rpm, 130 rpm, 150 rpm, 170 rpm, and 190 rpm). Study results have shown that both PAT’s flow and pressure fields deteriorate with the machine influx decrease, where the impeller rotational speed increase is found to alleviate PAT pressure pulsation levels under high-flow operating conditions, while it worsens them under part-load conditions. This study’s results add value to a thorough understanding of PAT flow dynamics, which, in a long run, contributes to the solution of the so-far existent technical issues.


Foods ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 28
Author(s):  
Ludmila Kalčáková ◽  
Matej Pospiech ◽  
Bohuslava Tremlová ◽  
Zdeňka Javůrková ◽  
Irina Chernukha

To increase production efficiency of meat products, milk protein additives are often used. Despite a number of advantages, use of dairy ingredients involves a certain risk, namely the allergenic potential of milk proteins. A number of methods have been developed to detect milk-origin raw materials in foodstuffs, including immunological reference methods. This study presents newly developed immunohistochemical (IHC) methods for casein detection in meat products. Casein was successfully detected directly in meat products where sensitivity was determined at 1.21 and specificity at 0.28. The results obtained from the IHC were compared with the Enzyme-Linked Immuno Sorbent Assay (ELISA) and there was no statistically significant difference between the IHC and ELISA methods (p > 0.05). The correspondence between the methods was 72% in total. The highest correspondence was reached in frankfurters (90%), the lowest in canned pâté (44%).


Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3659
Author(s):  
Andrzej Szajna ◽  
Mariusz Kostrzewski ◽  
Krzysztof Ciebiera ◽  
Roman Stryjski ◽  
Waldemar Woźniak

Industry 4.0, a term invented by Wolfgang Wahlster in Germany, is celebrating its 10th anniversary in 2021. Still, the digitalization of the production environment is one of the hottest topics in the computer science departments at universities and companies. Optimization of production processes or redefinition of the production concepts is meaningful in light of the current industrial and research agendas. Both the mentioned optimization and redefinition are considered in numerous subtopics and technologies. One of the most significant topics in these areas is the newest findings and applications of artificial intelligence (AI)—machine learning (ML) and deep convolutional neural networks (DCNNs). The authors invented a method and device that supports the wiring assembly in the control cabinet production process, namely, the Wire Label Reader (WLR) industrial system. The implementation of this device was a big technical challenge. It required very advanced IT technologies, ML, image recognition, and DCNN as well. This paper focuses on an in-depth description of the underlying methodology of this device, its construction, and foremostly, the assembly industrial processes, through which this device is implemented. It was significant for the authors to validate the usability of the device within mentioned production processes and to express both advantages and challenges connected to such assembly process development. The authors noted that in-depth studies connected to the effects of AI applications in the presented area are sparse. Further, the idea of the WLR device is presented while also including results of DCNN training (with recognition results of 99.7% although challenging conditions), the device implementation in the wire assembly production process, and its users’ opinions. The authors have analyzed how the WLR affects assembly process time and energy consumption, and accordingly, the advantages and challenges of the device. Among the most impressive results of the WLR implementation in the assembly process one can be mentioned—the device ensures significant process time reduction regardless of the number of characters printed on a wire.


Agriculture ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 564
Author(s):  
Supakorn Potijun ◽  
Chonlada Yaisamlee ◽  
Anchalee Sirikhachornkit

Microalgae have long been used for the commercial production of natural colorants such as carotenoids and chlorophyll. Due to the rising demand for carotenoids and other natural products from microalgae, strategies to increase production efficiency are urgently needed. The production of microalgal biorefineries has been limited to countries with moderate climates. For countries with cooler climates and less daylight, methodologies for the efficient production of microalgal biorefineries need to be investigated. Algal strains that can be safely consumed as whole cells are also attractive alternatives for developing as carotenoid supplements, which can also contain other compounds with health benefits. Using such strains helps to eliminate the need for hazardous solvents for extraction and several other complicated steps. In this study, the mesophilic green alga Chlamydomonas reinhardtii was employed to study the effects of cold stress on cell physiology and the production of pigments and storage compounds. The results showed that temperatures between 10 and 20 °C induced carotenoid and chlorophyll accumulation in the wild-type strain of C. reinhardtii. Interestingly, the increased level of carotenoids suggested that they might play a crucial role in cold stress acclimation. A temperature of 15 °C resulted in the highest carotenoid and chlorophyll productivity. At this temperature, carotenoid and chlorophyll productivity was 2 times and 1.3 times higher than at 25 °C, respectively. Subjecting a mutant defective in lutein and zeaxanthin accumulation to cold stress revealed that these two carotenoids are not essential for cold stress survival. Therefore, cold temperature could be used as a strategy to induce and increase the productivity of pigments in C. reinhardtii.


Author(s):  
Mohamad Taleuzzaman ◽  
Sanjay Chuhan ◽  
Sadaf Jamal Gilani ◽  
Syed Sarim Imam ◽  
Sarwar Beg

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4543
Author(s):  
Michael Spiegel ◽  
Eric Veith ◽  
Thomas Strasser

Multi-microgrids address the need for a resilient, sustainable, and cost-effective electricity supply by providing a coordinated operation of individual networks. Due to local generation, dynamic network topologies, and islanding capabilities of hosted microgrids or groups thereof, various new fault mitigation and optimization options emerge. However, with the great flexibility, new challenges such as complex failure modes that need to be considered for a resilient operation, appear. This work systematically reviews scheduling approaches which significantly influence the feasibility of mitigation options before a failure is encountered. An in-depth analysis of identified key contributions covers aspects such as the mathematical apparatus, failure models and validation to highlight the current methodical spectrum and to identify future perspectives. Despite the common optimization-based framework, a broad variety of scheduling approaches is revealed. However, none of the key contributions provides practical insights beyond lab validation and considerable effort is required until the approaches can show their full potential in practical implementations. It is expected that the great level of detail guides further research in improving and validating existing scheduling concepts as well as it, in the long run, aids engineers to choose the most suitable options regarding increasingly resilient power systems.


2002 ◽  
Vol 130 (11-12) ◽  
pp. 382-385 ◽  
Author(s):  
Ivan Ignjatovic ◽  
Branko Potic ◽  
Ivica Stojkovic ◽  
Nebojsa Markovic ◽  
Tomislav Stamenic

Renal cell carcinoma is frequently a matter of urological interest. In recent years there were significant improvements regarding the earlier diagnosis more precise preoperative staging and appropriate therapy. One hundred patients (42-78 years old) with the preoperative diagnosis of renal cell carcinoma were analyzed. Preoperative radiological evaluation included transabdominal ultrasound, intravenous urography, computer-assisted tomography, and angiography. In all patients after radical nephrectomy pathohistological diagnosis was established and patients with the confirmed renal cell carcinoma tumor staging was performed. All histological findings were compared with the preoperative results of radiological examinations. Reliability of all of them is separately determined. Our results confirmed that the most efficient method of preoperative staging was computer-assisted tomography (accuracy 93%). Diagnostic methods that were previously used like intravenous urography and angiography, were not useful for routine diagnostic purposes. Ultrasound is a precise but not an enough informative diagnostic tool (accuracy 87%). Combine used of both ultrasound and contrast computer-assisted tomography is cost-effective, and an enough precise combination for everyday use.


Sign in / Sign up

Export Citation Format

Share Document