scholarly journals Idaho National Laboratory Lead or Lead-Bismuth Eutectic (LBE) Test Facility - R&D Requirements, Design Criteria, Design Concept, and Concept Guidance

2005 ◽  
Author(s):  
Eric P. Loewen ◽  
Paul Demkowicz
Keyword(s):  
National Laboratory ◽  
Design Concept ◽  
Test Facility ◽  
Design Criteria ◽  
Idaho National Laboratory ◽  
Lead Bismuth Eutectic

scholarly journals Test Results From the Idaho National Laboratory 15kW High Temperature Electrolysis Test Facility

2009 ◽  
Author(s):  
Carl M. Stoots ◽  
Keith G. Condie ◽  
James E. O’Brien ◽  
J. Stephen Herring ◽  
Joseph J. Hartvigsen
Keyword(s):  
High Temperature ◽  
National Laboratory ◽  
The United States ◽  
Solid Oxide ◽  
Test Facility ◽  
United States Department ◽  
Idaho National Laboratory ◽  
Production Of Hydrogen ◽  
Heat Recuperation ◽  
High Temperature Electrolysis

A 15 kW high temperature electrolysis test facility has been developed at the Idaho National Laboratory under the United States Department of Energy Nuclear Hydrogen Initiative. This facility is intended to study the technology readiness of using high temperature solid oxide cells for large scale nuclear powered hydrogen production. It is designed to address larger-scale issues such as thermal management (feedstock heating, high temperature gas handling, heat recuperation), multiple-stack hot zone design, multiple-stack electrical configurations, etc. Heat recuperation and hydrogen recycle are incorporated into the design. The facility was operated for 1080 hours and successfully demonstrated the largest scale high temperature solid-oxide-based production of hydrogen to date.

scholarly journals Recent Progress at the Idaho National Laboratory in High Temperature Electrolysis for Hydrogen and Syngas Production

2008 ◽  
Author(s):  
C. Stoots ◽  
J. O’Brien ◽  
J. Herring ◽  
J. Hartvigsen
Keyword(s):  
Salt Lake ◽  
National Laboratory ◽  
Salt Lake City ◽  
H2 Production ◽  
Test Facility ◽  
Operating Voltage ◽  
Idaho National Laboratory ◽  
Syngas Production ◽  
Lake City ◽  
Stack Testing

This paper presents the most recent results of experiments conducted at the Idaho National Laboratory (INL) studying electrolysis of steam and coelectrolysis of steam / carbon dioxide in solid-oxide electrolysis stacks. Single button cell tests as well as multi-cell stack testing have been conducted. Multi-cell stack testing used 10 × 10 cm cells (8 × 8 cm active area) supplied by Ceramatec, Inc (Salt Lake City, Utah, USA) and ranged from 10 cell short stacks to 240 cell modules. Tests were conducted either in a bench-scale test apparatus or in a newly developed 5 kW Integrated Laboratory Scale (ILS) test facility. Gas composition, operating voltage, and operating temperature were varied during testing. The tests were heavily instrumented, and outlet gas compositions were monitored with a gas chromatograph. The ILS facility is currently being expanded to 15 kW testing capacity (H2 production rate based upon lower heating value).

scholarly journals Idaho National Laboratory Experimental Research in High Temperature Electrolysis for Hydrogen and Syngas Production

2008 ◽  
Author(s):  
Carl M. Stoots ◽  
James E. O’Brien ◽  
J. Stephen Herring ◽  
Keith G. Condie ◽  
Joseph J. Hartvigsen
Keyword(s):  
High Temperature ◽  
Large Scale ◽  
Salt Lake ◽  
National Laboratory ◽  
Salt Lake City ◽  
Test Facility ◽  
Operating Voltage ◽  
Idaho National Laboratory ◽  
Syngas Production ◽  
Stack Testing

The Idaho National Laboratory (Idaho Falls, Idaho, USA), in collaboration with Ceramatec, Inc. (Salt Lake City, Utah, USA), is actively researching the application of solid oxide fuel cell technology as electrolyzers for large scale hydrogen and syngas production. This technology relies upon electricity and high temperature heat to chemically reduce a steam or steam / CO2 feedstock. Single button cell tests, multi-cell stack, as well as multi-stack testing has been conducted. Stack testing used 10 × 10 cm cells (8 × 8 cm active area) supplied by Ceramatec and ranged from 10 cell short stacks to 240 cell modules. Tests were conducted either in a bench-scale test apparatus or in a newly developed 5 kW Integrated Laboratory Scale (ILS) test facility. Gas composition, operating voltage, and operating temperature were varied during testing. The tests were heavily instrumented, and outlet gas compositions were monitored with a gas chromatograph. The ILS facility is currently being expanded to ∼15 kW testing capacity (H2 production rate based upon lower heating value).

Lifetimes of 214Po and 212Po measured with Counting Test Facility at Gran Sasso National Laboratory

2014 ◽  
Vol 138 ◽  
pp. 444-446
Author(s):  
L. Miramonti ◽  
G. Bellini ◽  
J. Benziger ◽  
D. Bick ◽  
G. Bonfini ◽  
...  
Keyword(s):  
National Laboratory ◽  
Test Facility

scholarly journals Idaho National Laboratory Cultural Resource Management Annual Report FY 2006

2007 ◽  
Author(s):  
Clayton F. Marler ◽  
Julie Braun ◽  
Hollie Gilbert ◽  
Dino Lowrey ◽  
Brenda Ringe Pace
Keyword(s):  
Resource Management ◽  
Annual Report ◽  
National Laboratory ◽  
Cultural Resource Management ◽  
Cultural Resource ◽  
Idaho National Laboratory
Sign in / Sign up

Export Citation Format

Share Document