scholarly journals Smart Sensor System for Structural Condition Monitoring of Wind Turbines: 30 May 2002--30 April 2006

2006 ◽  
Author(s):  
M. J. Schulz ◽  
M. J. Sundaresan
Keyword(s):  
Condition Monitoring ◽  
Wind Turbines ◽  
Structural Condition ◽  
Sensor System ◽  
Smart Sensor

scholarly journals Maintenance Planning of Offshore Wind Turbine Using Condition Monitoring Information

2009 ◽  
Author(s):  
Jose´ G. Rangel-Rami´rez ◽  
John D. So̸rensen
Keyword(s):  
Condition Monitoring ◽  
Wind Turbines ◽  
Wind Farm ◽  
Offshore Structures ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Maintenance Planning ◽  
Offshore Wind Turbines ◽  
Inspection And Maintenance ◽  
Monitoring Information

Deterioration processes such as fatigue and corrosion are typically affecting offshore structures. To “control” this deterioration, inspection and maintenance activities are developed. Probabilistic methodologies represent an important tool to identify the suitable strategy to inspect and control the deterioration in structures such as offshore wind turbines (OWT). Besides these methods, the integration of condition monitoring information (CMI) can optimize the mitigation activities as an updating tool. In this paper, a framework for risk-based inspection and maintenance planning (RBI) is applied for OWT incorporating CMI, addressing this analysis to fatigue prone details in welded steel joints at jacket or tripod steel support structures for offshore wind turbines. The increase of turbulence in wind farms is taken into account by using a code-based turbulence model. Further, additional modes t integrate CMI in the RBI approach for optimal planning of inspection and maintenance. As part of the results, the life cycle reliabilities and inspection times are calculated, showing that earlier inspections are needed at in-wind farm sites. This is expected due to the wake turbulence increasing the wind load. With the integration of CMI by means Bayesian inference, a slightly change of first inspection times are coming up, influenced by the reduction of the uncertainty and harsher or milder external agents.

scholarly journals Cost-Effective Condition Monitoring for Wind Turbines

2010 ◽  
Vol 57 (1) ◽  
pp. 263-271 ◽  
Author(s):  
Wenxian Yang ◽  
P.J. Tavner ◽  
C.J. Crabtree ◽  
M. Wilkinson
Keyword(s):  
Condition Monitoring ◽  
Wind Turbines ◽  
Cost Effective ◽  
Effective Condition

Condition monitoring and fault detection in wind turbines based on cointegration analysis of SCADA data

2018 ◽  
Vol 116 ◽  
pp. 107-122 ◽  
Author(s):  
Phong B. Dao ◽  
Wieslaw J. Staszewski ◽  
Tomasz Barszcz ◽  
Tadeusz Uhl
Keyword(s):  
Fault Detection ◽  
Condition Monitoring ◽  
Wind Turbines ◽  
Cointegration Analysis

Condition Monitoring of Wind Turbines Based on the Scattering Transform of Vibration Data

2021 ◽  
Author(s):  
Junyu Qi ◽  
Alexandre Mauricio ◽  
Konstantinos Gryllias
Keyword(s):  
Condition Monitoring ◽  
Wind Turbines ◽  
Wind Farms ◽  
Operating Conditions ◽  
Vibration Data ◽  
Bearing Diagnostics ◽  
Scattering Transform ◽  
The One ◽  
Envelope Spectrum ◽  
High Effort

Abstract As a renewable, unlimited and free resource, wind energy has been intensively deployed in the past to generate electricity. However, the maintenance of Wind Turbines (WTs) can be challengeable. On the one hand, most wind farms operate in remote areas and on the other hand, the dimension of WTs’ tip/hub/rotor are usually enormous. In order to prevent abrupt breakdowns of WTs, a number of Condition Monitoring (CM) methods have been proposed. Focusing on bearing diagnostics, Squared Envelope Spectrum is one of the most common techniques. Moreover in order to identify the optimum demodulation frequency band, fast Kurtogram, Infogram and Sparsogram are nowadays popular tools evaluating respectively the Kurtosis, the Negentropy and the Sparsity. The analysis of WTs usually requires high effort due to the complexity of the drivetrain and the varying operating conditions and therefore there is still need for research on effective and reliable CM techniques for WT monitoring. Thus the purpose of this paper is to investigate a blind and effective CM approach based on the Scattering Transform. Through the comparison with state of the art techniques, the proposed methodology is found more powerful to detect a fault on six validated WT datasets.

scholarly journals The Limpet: A ROS-Enabled Multi-Sensing Platform for the ORCA Hub

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3487 ◽  
Author(s):  
Mohammed Sayed ◽  
Markus Nemitz ◽  
Simona Aracri ◽  
Alistair McConnell ◽  
Ross McKenzie ◽  
...  
Keyword(s):  
Signal Processing ◽  
Condition Monitoring ◽  
Wind Turbines ◽  
Communication Systems ◽  
Offshore Structures ◽  
Classification Approach ◽  
Communication Techniques ◽  
Sensing Platform ◽  
Online Classification ◽  
Monitoring Process

The oil and gas industry faces increasing pressure to remove people from dangerous offshore environments. Robots present a cost-effective and safe method for inspection, repair, and maintenance of topside and marine offshore infrastructure. In this work, we introduce a new multi-sensing platform, the Limpet, which is designed to be low-cost and highly manufacturable, and thus can be deployed in huge collectives for monitoring offshore platforms. The Limpet can be considered an instrument, where in abstract terms, an instrument is a device that transforms a physical variable of interest (measurand) into a form that is suitable for recording (measurement). The Limpet is designed to be part of the ORCA (Offshore Robotics for Certification of Assets) Hub System, which consists of the offshore assets and all the robots (Underwater Autonomous Vehicles, drones, mobile legged robots etc.) interacting with them. The Limpet comprises the sensing aspect of the ORCA Hub System. We integrated the Limpet with Robot Operating System (ROS), which allows it to interact with other robots in the ORCA Hub System. In this work, we demonstrate how the Limpet can be used to achieve real-time condition monitoring for offshore structures, by combining remote sensing with signal-processing techniques. We show an example of this approach for monitoring offshore wind turbines, by designing an experimental setup to mimic a wind turbine using a stepper motor and custom-designed acrylic fan blades. We use the distance sensor, which is a Time-of-Flight sensor, to achieve the monitoring process. We use two different approaches for the condition monitoring process: offline and online classification. We tested the offline classification approach using two different communication techniques: serial and Wi-Fi. We performed the online classification approach using two different communication techniques: LoRa and optical. We train our classifier offline and transfer its parameters to the Limpet for online classification. We simulated and classified four different faults in the operation of wind turbines. We tailored a data processing procedure for the gathered data and trained the Limpet to distinguish among each of the functioning states. The results show successful classification using the online approach, where the processing and analysis of the data is done on-board by the microcontroller. By using online classification, we reduce the information density of our transmissions, which allows us to substitute short-range high-bandwidth communication systems with low-bandwidth long-range communication systems. This work shines light on how robots can perform on-board signal processing and analysis to gain multi-functional sensing capabilities, improve their communication requirements, and monitor the structural health of equipment.

Sign in / Sign up

Export Citation Format

Share Document