scholarly journals Pipeline Structural Health Monitoring Using Macro-fiber Composite Active Sensors

2006 ◽  
Author(s):  
Andrew B. Thien
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Fiber Composite ◽  
Active Sensors ◽  
Structural Health ◽  
Macro Fiber Composite

Structural Health Monitoring With Piezoelectric Active Sensors

2000 ◽  
Author(s):  
Howard A. Winston ◽  
Fanping Sun ◽  
Balkrishna S. Annigeri
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Structural Damage ◽  
Electromechanical Coupling ◽  
Low Cost ◽  
Piezoelectric Element ◽  
Impedance Spectrum ◽  
Active Sensors ◽  
Electromechanical Impedance ◽  
Structural Health

A technology for non-intrusive real-time structural health monitoring using piezoelectric active sensors is presented. The approach is based on monitoring variations of the coupled electromechanical impedance of piezoelectric patches bonded to metallic structures in high-frequency bands. In each of these applications, a single piezoelectric element is used as both an actuator and a sensor. The resulting electromechanical coupling makes the frequency-dependent electric impedance spectrum of the PZT sensor a good mapping of the underlying structure’s acoustic signature. Moreover, incipient structural damage can be indicated by deviations of this signature from its original baseline pattern. Unique features of this technology include its high sensitivity to structural damage, non-intrusiveness to the host structure, and low cost of implementation. These features have potential for enabling on-board damage monitoring of critical or inaccessible aerospace structures and components, such as aircraft wing joints, and both internal and external jet engine components. Several exploratory applications will be discussed.

Structural Health Monitoring of Composite Plates Subjected to Impacts Using the Electromechanical Impedance Technique

2008 ◽  
Author(s):  
Karina M. Tsuruta ◽  
Leandro R. Cunha ◽  
Raquel S. L. Rade ◽  
Domingos A. Rade
Keyword(s):  
Structural Health Monitoring ◽  
Impact Energy ◽  
Health Monitoring ◽  
Fiber Composite ◽  
Composite Plates ◽  
Carbon Fiber Composite ◽  
Monitoring Method ◽  
Electromechanical Impedance ◽  
Structural Health ◽  
Functional Relations

The aim of this paper is to evaluate the use of the Structural Health Monitoring (SHM) technique based on the concept of electromechanical impedance for the assessment of low-energy impact damage in laminated carbon-fiber composite plates. The experiments were carried-out by using an especially designed pendulum, and were planned in such a way to accommodate a range of test conditions, such as impact energy and dimension of the impacting piece. Also, it was investigated the influence of the frequency band in which the impedance functions are measured. Additionally, statistical metamodels were built aiming at establishing functional relations between the values of the damage metric and impact energy for single and multiple impacts. The obtained results demonstrate the capability of the monitoring method to identify various damage levels corresponding to different impact conditions.

Design, Development, and Assembly of Space Flight Structural Health Monitoring Experiment

2012 ◽  
Author(s):  
David Siler ◽  
Ben Cooper ◽  
Chris White ◽  
Stephen Marinsek ◽  
Andrei Zagrai ◽  
...  
Keyword(s):  
Wave Propagation ◽  
Structural Health Monitoring ◽  
Data Acquisition ◽  
Health Monitoring ◽  
Space Flight ◽  
Design Development ◽  
Active Sensors ◽  
Electromechanical Impedance ◽  
Structural Health ◽  
Propagation Experiment

The paper presents the design, development, and assembly of Structural Health Monitoring (SHM) experiments intended to be launch in space on a sub-orbital rocket flight as well as a high altitude balloon flight. The experiments designed investigate the use of both piezoelectric sensing hardware in a wave propagation experiment and piezoelectric wafer active sensors (PWAS) in an electromechanical impedance experiment as active elements of spacecraft SHM systems. The list of PWAS experiments includes a bolted-joint test and an experiment to monitor PWAS condition during spaceflight. Electromechanical impedances of piezoelectric sensors will be recorded in-flight at varying input frequencies using an onboard data acquisition system. The wave propagation experiment will utilize the sensing hardware of the Metis Design MD7 Digital SHM system. The payload will employ a triggering system that will begin experiment data acquisition upon sufficient saturation of g-loading. The experiment designs must be able to withstand the harsh environment of space, intense vibrations from the rocket launch, and large shock loading upon re-entry. The paper discusses issues encountered during design, development, and assembly of the payload and aspects central to successful demonstration of the SHM system during both the sub-orbital space flight and balloon launch.

Impact Detection Using an Array of Piezoelectric Wafer Active Sensors and a Microcontroller Unit

2010 ◽  
Author(s):  
Abraham Light-Marquez ◽  
Andrei Zagrai
Keyword(s):  
Structural Health Monitoring ◽  
Sensor Network ◽  
Health Monitoring ◽  
Detection System ◽  
Active Sensors ◽  
Structural Health ◽  
Impact Detection ◽  
Piezoelectric Wafer Active Sensors ◽  
Piezoelectric Wafer ◽  
The Impact

This report discusses the development of an embeddable impact detection system utilizing an array of piezoelectric wafer active sensors (PWAS) and a microcontroller. Embeddable systems are a critical component to successfully implement a complete and robust structural health monitoring system. System capabilities include impact detection, impact location determination and digitization of the impact waveform. A custom algorithm was developed to locate the site of the impact.. The embedded system has the potential for additional capabilities including advanced signal processing and the integration of wireless functionality. For structural health monitoring applications it is essential to determine the extent of damage done to the structure. In an attempt to determine these parameters a series of impact tests were conducted using a ball drop tower on a square aluminum plate. The response of the plate to the impact event was recorded using a piezoelectric wafer sensor network attached to the surface of the plate. From this testing it was determined that several of the impact parameters are directly correlated with the features recorded by the sensor network.

Use of Time-Series Predictive Models for Piezoelectric Active-Sensing in Structural Health Monitoring Applications

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
Eloi Figueiredo ◽  
Gyuhae Park ◽  
Kevin M. Farinholt ◽  
Charles R. Farrar ◽  
Jung-Ryul Lee
Keyword(s):  
Time Series ◽  
Structural Health Monitoring ◽  
Frequency Response ◽  
Frequency Domain ◽  
Health Monitoring ◽  
Active Sensing ◽  
Response Functions ◽  
Active Sensors ◽  
Frequency Response Functions ◽  
Structural Health

In this paper, time domain data from piezoelectric active-sensing techniques is utilized for structural health monitoring (SHM) applications. Piezoelectric transducers have been increasingly used in SHM because of their proven advantages. Especially, their ability to provide known repeatable inputs for active-sensing approaches to SHM makes the development of SHM signal processing algorithms more efficient and less susceptible to operational and environmental variability. However, to date, most of these techniques have been based on frequency domain analysis, such as impedance-based or high-frequency response functions-based SHM techniques. Even with Lamb wave propagations, most researchers adopt frequency domain or other analysis for damage-sensitive feature extraction. Therefore, this study investigates the use of a time-series predictive model which utilizes the data obtained from piezoelectric active-sensors. In particular, time series autoregressive models with exogenous inputs are implemented in order to extract damage-sensitive features from the measurements made by piezoelectric active-sensors. The test structure considered in this study is a composite plate, where several damage conditions were artificially imposed. The performance of this approach is compared to that of analysis based on frequency response functions and its capability for SHM is demonstrated.

Sign in / Sign up

Export Citation Format

Share Document