scholarly journals Low Wind Speed Technology Phase I: Prototype Multi-Megawatt Low Wind Speed Turbine; General Electric Wind Energy, LLC

2006 ◽  
Author(s):  
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Phase I ◽  
General Electric ◽  
Electric Wind ◽  
Low Wind Speed

Creating the Wind Energy for Operating the 3-C-Section Blades Wind Car

2012 ◽  
Vol 622-623 ◽  
pp. 1188-1193 ◽  
Author(s):  
Hüseyin Çamur ◽  
Youssef Kassem
Keyword(s):  
Wind Speed ◽  
Angular Velocity ◽  
Wind Energy ◽  
Drag Force ◽  
Mechanical Energy ◽  
Main Shaft ◽  
Airflow Velocity ◽  
Low Speed ◽  
Low Wind Speed

The purpose of this work is to determine the drag characteristics and the torque of three C-section blades wind car. Three C-section blades are directly connected to wheels by using of various kinds of links. Gears are used to convert the wind energy to mechanical energy to overcome the load exercised on the main shaft under low speed. Previous work on three vertical blades wind car resulted in discrepancies when compared to this work. Investigating these differences was the motivation for this series of work. The calculated values were compared to the data of three vertical blades wind car. The work was conducted in a low wind speed. The drag force acting on each model was calculated with an airflow velocity of 4 m/s and angular velocity of the blade of 13.056 rad/s.

Calculation of Weibull Distribution parameters at low wind speed and performance analysis

2021 ◽  
pp. 1-24
Author(s):  
Yusuf Alper Kaplan
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Weibull Distribution ◽  
Energy Potential ◽  
Average Wind Speed ◽  
Statistical Indicator ◽  
Low Wind Speed ◽  
Distribution Parameters ◽  
Wind Energy Potential ◽  
And Performance

In this study, the compatibility of the real wind energy potential to the estimated wind energy potential by Weibull Distribution Function (WDF) of a region with low average wind speed potential was examined. The main purpose of this study is to examine the performance of six different methods used to find the coefficients of the WDF and to determine the best performing method for selected region. In this study seven-year hourly wind speed data obtained from the general directorate of meteorology of this region was used. The root mean square error (RMSE) statistical indicator was used to compare the efficiency of all used methods. Another main purpose of this study is to observe the how the performance of the used methods changes over the years. The obtained results showed that the performances of the used methods showed slight changes over the years, but when evaluated in general, it was observed that all method showed acceptable performance. Based on the obtained results, when the seven-year data is evaluated in this selected region, it can be said that the MM method shows the best performance.

scholarly journals U.S. Department of Energy Wind Energy Research Program for Low Wind Speed Technology of the Future

2002 ◽  
Vol 124 (4) ◽  
pp. 455-458 ◽  
Author(s):  
Stan Calvert ◽  
Robert Thresher, ◽  
Susan Hock, ◽  
Alan Laxson, and ◽  
Brian Smith
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Research Program ◽  
Department Of Energy ◽  
Energy Research ◽  
Low Wind Speed ◽  
The Future

scholarly journals A Techno-Economic Model for Wind Energy Costs Analysis for Low Wind Speed Areas

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1463 ◽  
Author(s):  
Kehinde A. Adeyeye ◽  
Nelson Ijumba ◽  
Jonathan S. Colton
Keyword(s):  
Renewable Energy ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Economic Model ◽  
African Continent ◽  
Financial Return ◽  
Levelized Cost Of Electricity ◽  
Low Wind Speed ◽  
Ferris Wheel

The global population is moving away from fossil fuel technologies due to their many disadvantages, such as air pollution, greenhouse gases emission, global warming, acid rain, health problems, and high costs. These disadvantages make fossil fuels unsustainable. As a result, renewable energy is becoming more attractive due to its steadily decreasing costs. Harnessing renewable energy promises to meet the present energy demands of the African continent. The enormous renewable energy potential available across the African continent remains largely untapped, especially for wind energy. However, marginal and fair wind speeds and power densities characterize African wind energy resulting in low and unsustainable power in many areas. This research develops a techno-economic model for wind energy cost analysis for a novel, Ferris wheel-based wind turbine. The model is used to techno-economically analyze the siting of wind turbine sites in low wind speed areas on the African continent. The wind turbine’s technical performance is characterized by calculating the annual energy production and the capacity factor using the wind Weibull probability distribution of the cities and theoretical power curve of the wind turbine. Its economic performance is evaluated using annualized financial return on investment, simple payback period, and levelized cost of electricity. The techno-economic model is validated for 21 African cities and shows that the Ferris wheel-based design is very competitive with four current, commercial wind turbines, as well as with other sources of energy. Hence, the new wind turbine may help provide the economical, clean, renewable energy that Africa needs.

scholarly journals A Two-Stage Wind Grid Inverter with Boost Converter

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Yanbo Che ◽  
Wen Zhang ◽  
Leijiao Ge ◽  
Jijie Zhang
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Topological Structure ◽  
Boost Converter ◽  
Superior Performance ◽  
Practical Significance ◽  
Energy Output ◽  
Low Wind Speed ◽  
And Control ◽  
Inverter Topology

At present, the conversion efficiency of commercial small wind grid inverter is low, and, in case of low wind speed, the wind energy cannot be used efficiently. In order to resolve this problem, it is necessary to improve the topological structure and control strategy, and design a new small wind grid inverter. In this paper, we apply a two-voltage stage topology with boost converter. The boost circuit is to achieve the maximum power output of the wind energy by the segmented regulation, while the improved inverter topology realizes the overall system function with the former stage circuit. The experimental results show that the new wind grid inverter has superior performance in the low wind speed, and has the high quality energy output. This research has an important practical significance to improve the utilization of renewable energy.

Wind Energy Harnessing System for Low and High Wind Speeds

2019 ◽  
Author(s):  
Majid Rashidi ◽  
Jaikrishnan R. Kadambi ◽  
Renjie Ke
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
High Speed ◽  
Power Transmission ◽  
Vertical Axis ◽  
Geographic Locations ◽  
Wind Speeds ◽  
Low Wind Speed ◽  
Energy Harnessing

Abstract This work presents the design and analysis of a novel wind energy harnessing system that makes use of wind defecting structures to increase the ambient wind speed at geographic locations with relatively low wind speed. The system however reacts to highspeed wind conditions by altering the profile of the wind defecting structure in order to eliminate wind speed amplification attribute of the system, thereby protecting the wind turbine assembly at high speed wind conditions. Although increasing the wind speed is advantageous at geographic locations that the wind speed is typically low; however, from times to time, there could be sustained high-speed wind conditions at the same locations that may damage the wind turbine systems that take advantage of the wind defecting structures. The present work disclosed a wind deflecting structure formed by at least two sail-like partial cylindrical structures that are supported atop of a tower-like foundation in a symmetric arrangement, where one or more wind turbines can be installed in the space between the two partial cylinders. The two partial cylinders, each substantially in form a quarter cylinder is made of plurality of parallel ribbed-like bars, hereafter referred to as “bars” with a flexible thin material that are mechanically supported by the bars. The bars are oriented in a direction perpendicular to the ground; allowing the wing deflecting structures to accept horizonal axis or vertical axis turbines in the space between them. The function of the bars is to allow the thin material, attached to them, to assume a curved configuration substantially in the form of a quarter cylinder. The apparatus is equipped with wind speed monitoring devices, and power source and power transmission means, such as cable-pulleys, chain-sprockets, gears, or mechanical linkages that all work in concert to deploy or stow the thin material along the vertical rods depending to the magnitude of the prevailing wind speed. Preliminary computational fluid dynamics analyses have shown that the wind deflecting structure proposed here in amplifies the wind speed by a factor of 1.65.

A methodology for improving wind energy production in low wind speed regions, with a case study application in Iraq

2019 ◽  
Vol 127 ◽  
pp. 89-102 ◽  
Author(s):  
Abdul Salam Darwish ◽  
Sabry Shaaban ◽  
Erika Marsillac ◽  
Nazar Muneam Mahmood
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Energy Production ◽  
Low Wind Speed ◽  
Study Application

scholarly journals Experimental Study of Wind Booster Addition for Savonius Vertical Wind Turbine of Two Blades Variations Using Low Wind Speed

2019 ◽  
Vol 125 ◽  
pp. 14003
Author(s):  
Eflita Yohana ◽  
MSK. Tony Suryo U ◽  
Binawan Luhung ◽  
Mohamad Julian Reza ◽  
M Badruz Zaman
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Vertical Axis ◽  
Vertical Wind ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Average Value ◽  
Low Wind Speed

The Wind turbine is a tool used in Wind Energy Conversion System (WECS). The wind turbine produces electricity by converting wind energy into kinetic energy and spinning to produce electricity. Vertical Axis Wind Turbine (VAWT) is designed to produce electricity from winds at low speeds. Vertical wind turbines have 2 types, they are wind turbine Savonius and Darrieus. This research is to know the effect of addition wind booster to Savonius vertical wind turbine with the variation 2 blades and 3 blades. Calculation the power generated by wind turbine using energy analysis method using the concept of the first law of thermodynamics. The result obtained is the highest value of blade power in Savonius wind turbine without wind booster (16.5 ± 1.9) W at wind speed 7 m/s with a tip speed ratio of 1.00 ± 0.01. While wind turbine Savonius with wind booster has the highest power (26.3 ± 1.6) W when the wind speed of 7 m/s with a tip speed ratio of 1.26 ± 0.01. The average value of vertical wind turbine power increases Savonius after wind booster use of 56%.

Sign in / Sign up

Export Citation Format

Share Document