TECHNICAL EVALUATION FOR NEGATIVE TANK PRESSURE AT CLOSURE FACILITIES

Pengembangan Mesin Pencacah Sampah/Limbah Plastik Dengan Sistem Crusher dan Silinder Pemotong Tipe Reel

Jurnal Ilmiah Poli Rekayasa ◽

10.30630/jipr.10.2.12 ◽

2015 ◽

Vol 10 (2) ◽

pp. 66

Author(s):

Junaidi - ◽

Ichlas Nur ◽

Nofriadi - ◽

Rusmardi -

Keyword(s):

Testing Machine ◽

Engine Performance ◽

Performance Testing ◽

Injection Molding Process ◽

Molding Process ◽

Recycling Industry ◽

Performance Improvements ◽

Plastic Recycling ◽

Technical Evaluation ◽

Lower Frame

Waste plastic mounting, but can be recycled into other products in the form of granules before further processed into pellets and seed injection molding process produces products such as buckets, plates, bottles and other beverages. To be processed into the required form of granules of plastic thrasher. Though so small plastic recycling industry is still constrained in plastic enumeration process because the machine used was not optimal ability. The purpose of this research is the development of the system thrasher plastic crusher and cutter cylinder-type reel and technical evaluation. This study was conducted over two years, the first year the design and manufacture of machinery, the second year is a technical evaluation of the engine, engine performance improvements and economic analysis of granular plastic products.From the results obtained engine design capacity of the machine ± 350 kg / h, the engine size is 50 cm x 120 cm x 30 cm, power motor of 10 HP at 1450 RPM rotation with 3 phase. Some of the major components of the engine that is, counter crusher unit consists of two counter rotating cylinders opposite, counter shaft size Ø 4 cm x 58 cm, blade chopper Ø 17 cm x 2 cm with the number of teeth / blades 7 pieces and the number of blades along shaft 7 pieces, buses retaining Ø 10 cm x 2 cm. Counter-cylinder unit consists of a reel-type cutter counter shaft size Ø 4 cm x 90 cm, the middle shaft mounted cylinder with Ø 17 cm x 40 cm as the holder of the chopper blades. Chopper blade consists of 4 pieces with a size of 40 cm x 2 cm x 4 cm with ASSAB materials. Furthermore, as the blade retaining bedknife shear force of the blade chopper, upper frame, lower frame, strainer, funnel entry, exit funnel, and the drive unit consists of an electric motor, reducer, belts, pulleys and 2 pieces of gear transmission. The results of performance testing machine crusher round cylinder 75 RPM and 1450 RPM reel-type cutting machine capacity ± 300 kg / h on the filter hole Ø 1.5 cm, with a 80% grain uniformity.

Download Full-text

Faculty Opinions recommendation of A Technical Evaluation of Wireless Connectivity from Patient Monitors to an Anesthesia Information Management System During Intensive Care Unit Surgery.

Faculty Opinions – Post-Publication Peer Review of the Biomedical Literature ◽

10.3410/f.726110417.793514038 ◽

2016 ◽

Author(s):

Yan Xiao

Keyword(s):

Intensive Care Unit ◽

Intensive Care ◽

Information Management ◽

Management System ◽

Information Management System ◽

Anesthesia Information Management System ◽

Technical Evaluation ◽

Wireless Connectivity

Download Full-text

Steam Vapor Cleaning Ejection Seat Frames and Components Technical Evaluation

10.21236/ada412405 ◽

2003 ◽

Cited By ~ 1

Author(s):

R. M. Kwan ◽

A. J. Yost ◽

J. V. Santiago ◽

A. C. Herring ◽

M. M. Conlin

Keyword(s):

Technical Evaluation

Download Full-text

To the theory analysis of tightness of tank of pressure testing

Tyumen State University Herald Physical and Mathematical Modeling Oil Gas Energy ◽

10.21684/2411-7978-2019-5-4-129-142 ◽

2019 ◽

Vol 5 (4) ◽

pp. 129-142

Author(s):

Vladislav Sh. Shagapov ◽

Ismagilyan G. Khusainov ◽

Emiliya V. Galiakbarova ◽

Zulfya R. Khakimova

Keyword(s):

Relaxation Time ◽

Three Dimensional ◽

Petroleum Products ◽

Technical Condition ◽

Excess Pressure ◽

Soil Parameters ◽

Theory Analysis ◽

Pressure Testing ◽

Tank Pressure ◽

Over Time

This article studies the process of relaxation of the pressure in a tank with the damaged area of the wall after pressure-testing. The authors use different methods for the diagnosis of the technical condition of objects of petroleum products storage. Pressure testing is one of nondestructive methods. The rate of pressure decrease is characteristic of the system tightness. This article studies the cases of ground and underground location of the tank. Pressure testing involves excess pressure inside of a tank and observing its decrease. Over time, one can assess the integrity of the system. This has required creating mathematical models to account the filtration of the liquid depending on the location of the tank. The results include the analytical solution of the task and the formulas for describing the dependence of the relaxation time of pressure in the tank from the liquid and soil parameters, geometry of the tank, and the damaged portion of the wall. The two- and three-dimensional cases of liquids filtration for the case of underground location of the tank were considered. The results of some numerical calculations of the dependence of reduction time and the time of half-life pressure from the area of the damaged portion of the wall were shown. The obtained solutions allow assessing the extent of the damaged area by the pressure testing with known values of tank, liquid, and soil.

Download Full-text