Atmospheric fluidized bed combustion advanced concept system

Recently, more and more attention has been paid to the removal of nickel ions due to their negative effects on the environment and human health. In this research, fly ash obtained as a result of incineration of municipal sewage sludge with the use of circulating fluidized bed combustion (CFBC) technology was used to analyze the possibility of removing Ni(II) ions in adsorption processes. The properties of the material were determined using analytical methods, such as SEM-EDS, XRD, BET, BJH, thermogravimetry, zeta potential, SEM, and FT-IR. Several factors were analyzed, such as adsorbent dose, initial pH, initial concentration, and contact time. As a result of the conducted research, the maximum sorption efficiency was obtained at the level of 99.9%. The kinetics analysis and isotherms showed that the pseudo-second order equation model and the Freundlich isotherm model best suited this process. In conclusion, sewage sludge fly ash may be a suitable material for the effective removal of nickel from wastewater and the improvement of water quality. This research is in line with current trends in the concepts of circular economy and sustainable development.

Download Full-text

NO x and N2O Emissions During Fluidized Bed Combustion of Leather Wastes

Journal of Energy Resources Technology ◽

10.1115/1.2126986 ◽

2005 ◽

Vol 128 (2) ◽

pp. 99-103 ◽

Cited By ~ 4

Author(s):

Alberto Bahillo ◽

Lourdes Armesto ◽

Andrés Cabanillas ◽

Juan Otero

Keyword(s):

Nitrogen Content ◽

Fluidized Bed ◽

Oxygen Content ◽

N2o Emission ◽

N2o Emissions ◽

Fluidized Bed Combustion ◽

High Nitrogen Content ◽

High Nitrogen ◽

Leather Wastes ◽

Leather Waste

Transformation of hide (animal skins) into leather is a complicated process during which significant amounts of wastes are generated. Fluidized bed combustion has been extended to burn different wastes that have problems with their disposal showing its technical feasibility. Considering the characteristics of the leather waste, especially the heating value (12.5-21MJ∕kg), it is a fairly good fuel. Moreover, leather waste has a high volatile matter, 65%, similar to other biomasses and unusual high nitrogen content, 14%. The aim of this work was to study leather wastes combustion in fluidized bed presenting experimental results regarding NOx and N2O emissions. A series of experiments were carried out in a fluidized bed pilot plant to understand the importance of operating parameters such as furnace temperature, oxygen content in gases, staged combustion and residence time on the NOx and N2O emission level. Despite having high nitrogen content, low conversion of N-fuel to NOx and N2O was measured during the combustion of leather waste in BFB. Bed temperature and oxygen content were found as the most important single parameters on N2O emission and only oxygen content has a significant influence on NOx emission. Leather waste exhibits a great NOx∕O2 trend; NOx emission decreases as the oxygen concentration decreases while the effect of combustion temperature on NOx is insignificant. Staged combustion does not give a reduction in NOx.

Download Full-text

97/04894 Pulse enhanced fluidized bed combustion

Fuel and Energy Abstracts ◽

10.1016/s0140-6701(97)82172-8 ◽

1997 ◽

Vol 38 (6) ◽

pp. 424

Keyword(s):

Fluidized Bed ◽

Fluidized Bed Combustion

Download Full-text