scholarly journals Modification of the x-ray diffraction efficiency of lithium fluoride crystals by surface treatment

1976 ◽  
Author(s):  
B.O. Sellick
Keyword(s):  
Surface Treatment ◽  
Diffraction Efficiency ◽  
Lithium Fluoride ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fluoride Crystals

THE STUDY ON GRANTING BIOACTIVITY OF Ti ALLOY BY SURFACE TREATMENT

2010 ◽  
Vol 17 (02) ◽  
pp. 153-157 ◽  
Author(s):  
N. R. HA ◽  
Z. X. YANG ◽  
G. C. KIM ◽  
K. H. HWANG ◽  
D. S. SEO ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Body Fluid ◽  
Surface Effect ◽  
In Vitro Test ◽  
Ti Alloy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Surface ◽  
Vitro Test

Titanium alloys are superior of biocompatibility, mechanical properties and chemical stability. The biocompatibility of Ti alloy is related to the surface effect between human tissue and implant. Therefore, the purpose of this study is to investigate the bioactivity of Ti alloy by alkali and acid chemical surface treatment; and the biocompatibility of Ti alloy was evaluated by in vitro test. Higher bone-bonding ability and bioactivity of the substrate were obtained by the formation of apatite layers on the Ti alloy in simulated body fluid. The microstructures of apatite layer were investigated by scanning electron microscope (SEM) and the formed phases were analyzed with X-ray diffraction (XRD).

X-ray diffraction efficiency of bent GaAs mosaic crystals for the Laue project

2014 ◽  
Vol 53 (4) ◽  
pp. 047104 ◽  
Author(s):  
Claudio Ferrari ◽  
Elisa Buffagni ◽  
Elisa Bonnini ◽  
Andrea Zappettini
Keyword(s):  
Diffraction Efficiency ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mosaic Crystals

Effect of Detector Width and Peak Location Technique on Residual Stress Determination in Case of Work-Hardened Materials

2006 ◽  
Vol 524-525 ◽  
pp. 755-760 ◽  
Author(s):  
M. Belassel ◽  
Eliane Bocher ◽  
J. Pineault
Keyword(s):  
Residual Stress ◽  
Surface Treatment ◽  
Work Hardening ◽  
Peak Position ◽  
X Ray Diffraction ◽  
Analytical Treatment ◽  
Near Surface ◽  
X Ray ◽  
Treatment Processes ◽  
High Level

To enhance the fatigue resistance of mechanical components, different surface treatment processes are often applied to put the near surface layer into compression. Surface treatment processes are typically associated with deformation and work-hardening of the material. When applying x-ray diffraction techniques to the characterization of such surfaces, the work-hardening will cause the x-ray diffraction peak width to increase. When peak widths reach high values, the peak tail may extend beyond the active area or window of the multichannel x-ray detector, in which case the peak is truncated. Subsequent analytical treatment of broad diffraction peaks is troublesome and advanced numerical methods are required to accurately determine the peak position. The following work indicates that when a wider detector is used it is possible to collect the full, non-truncated peak, determine the peak position with a high level of confidence and subsequently, to calculate the residual stress with much improved repeatability and reproducibility.

Effect of HCl+LiF Etching Process on Electrochemical Performance of Ti3C2

NANO ◽  
2020 ◽  
Vol 15 (05) ◽  
pp. 2050058
Author(s):  
Yuhua Huang ◽  
Weiwei Li ◽  
Bingchu Mei ◽  
Yu Yang ◽  
Zuodong Liu
Keyword(s):  
Electrochemical Performance ◽  
Photoelectron Spectroscopy ◽  
Lithium Fluoride ◽  
Specific Capacity ◽  
Etching Process ◽  
X Ray Diffraction ◽  
In Situ Oxidation ◽  
X Ray ◽  
Scanning Electron

In this paper, the effects of etching temperature and concentrations of hydrochloric acid (HCl) on the exfoliating process and the electrochemical performance of LIBs were systematically explored. The transformation from Ti3AlC2 to Ti3C2 was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Raman spectra. The suitable conditions of preparing Ti3C2 MXene though HCl and lithium fluoride (LiF) were obtained. Besides, the in-situ oxidation conditions of Ti3C2 during the etching process were studied. The TiO2/Ti3C2 was beneficial to improve the specific capacity from 125[Formula: see text]mAh[Formula: see text]g[Formula: see text] to 150[Formula: see text]mAh[Formula: see text]g[Formula: see text] at 1 C.

Evolution of X-ray rocking curves for paratellurite and lithium fluoride crystals under intense ultrasound

2017 ◽  
Vol 59 (5) ◽  
pp. 973-976 ◽  
Author(s):  
A. E. Blagov ◽  
Yu. V. Pisarevskii ◽  
A. V. Targonskii ◽  
Ya. A. Eliovich ◽  
M. V. Koval’chuk
Keyword(s):  
Lithium Fluoride ◽  
X Ray ◽  
Fluoride Crystals
Sign in / Sign up

Export Citation Format

Share Document