scholarly journals Use of Sandia's Central Receiver Test Facility as a high-intensity heat source for testing missile nose-cone (Radome) radar systems

1981 ◽  
Author(s):  
D. Porter
Keyword(s):  
Heat Source ◽  
High Intensity ◽  
Test Facility ◽  
Radar Systems ◽  
Central Receiver ◽  
Nose Cone

Heliostat Operation at the Central Receiver Test Facility, 1978–1980

1982 ◽  
Vol 104 (3) ◽  
pp. 133-138 ◽  
Author(s):  
J. T. Holmes
Keyword(s):  
Test Facility ◽  
Total Power ◽  
Peak Intensity ◽  
Central Receiver ◽  
Operations And Maintenance ◽  
Solar Noon ◽  
Mirror Reflectance ◽  
Targeting Accuracy

The operations and maintenance data and conclusions presented in this report are for the 222 heliostats that have been in use at the Central Receiver Test Facility (CRTF) from 1978 through 1980. The CRTF beam produces a total power of 5.5 MWth and a peak intensity of 2250 kW/m2 near solar noon. Improvements in the targeting accuracy have been made. The mirror reflectance is maintained near 80 percent by cleaning with rain or snow. The CRTF heliostats logged almost 300,000 operating hrs by the end of 1980.

The Design and Testing of a Molten Salt Steam Generator for Solar Application

1988 ◽  
Vol 110 (1) ◽  
pp. 38-44 ◽  
Author(s):  
W. A. Allman ◽  
D. C. Smith ◽  
C. R. Kakarala
Keyword(s):  
Molten Salt ◽  
Steam Generator ◽  
Test Facility ◽  
Process Conditions ◽  
Test Results ◽  
Overall Design ◽  
Central Receiver ◽  
And Performance ◽  
Design And Testing ◽  
Solar Application

This paper describes the design and testing of the Steam Generator Subsystem (SGS) for the Molten Salt Electric Experiment at Sandia Laboratories in Albuquerque, New Mexico. The Molten Salt Electric Experiment (MSEE) has been established at the Department of Energy’s five megawatt thermal Solar Central Receiver Test Facility, to demonstrate the feasibility of the molten salt central receiver concept. The experiment is capable of generating 0.75 megawatts of electric power from solar energy, with the capability of storing seven megawatt-hours of thermal energy. The steam generator subsystem transfers sensible heat from the solar-heated molten nitrate salt to produce steam to drive a conventional turbine. This paper discusses the design requirements dictated by the steam generator application and also reviews the process conditions. Details of each of the SGS components are given, featuring the aspects of the design and performance unique to the solar application. The paper concludes with a summary of the test results confirming the overall design of the subsystem.

scholarly journals A Flux Mapping Method for Central Receiver Systems

2011 ◽  
Author(s):  
Clifford K. Ho ◽  
Siri S. Khalsa
Keyword(s):  
Ccd Camera ◽  
Mapping Method ◽  
Test Facility ◽  
The Novel ◽  
Additional Information ◽  
Thermal Test ◽  
Central Receiver ◽  
Direct Normal Irradiance ◽  
Beam Characterization ◽  
Pixel Value

A new method is described to determine irradiance distributions on receivers and targets from heliostats or other collectors for concentrating solar power applications. The method uses a CCD camera, and, unlike previous beam characterization systems, it does not require additional sensors, calorimeters, or flux gauges on the receiver or target. In addition, spillage can exist (the beam does not need to be contained within the target). The only additional information required besides the digital images recorded from the CCD camera is the direct normal irradiance and the reflectivity of the receiver. Methods are described to calculate either an average reflectivity or a reflectivity distribution for the receiver using the CCD camera. The novel feature of this new PHLUX method is the use of recorded images of the sun to scale both the magnitude of each pixel value and the subtended angle of each pixel. A test was performed to evaluate the PHLUX method using a heliostat beam on the central receiver tower at the National Solar Thermal Test Facility in Albuquerque, NM. Results showed that the PHLUX method was capable of producing an accurate flux map of the heliostat beam with a relative error in the peak flux of 2%.

Operation of Large-Scale Pumps and Valves in Molten Salt

1994 ◽  
Vol 116 (3) ◽  
pp. 137-141 ◽  
Author(s):  
D. C. Smith ◽  
E. E. Rush ◽  
C. W. Matthews ◽  
J. M. Chavez ◽  
P. A. Bator
Keyword(s):  
Molten Salt ◽  
Power Plants ◽  
Large Scale ◽  
Solar Power ◽  
Test Facility ◽  
Plant Design ◽  
Thermal Test ◽  
Central Receiver ◽  
Solar Power Plants ◽  
Careful Design

The molten salt pump and valve (P&V) test loops at Sandia National Laboratories (SNL) National Solar Thermal Test Facility (NSTTF) operated between Jan. 1988 and Oct. 1990. The purpose of the P&V test was to demonstrate the performance, reliability, and service life of full-scale hot and cold salt pumps and valves for use in commercial central receiver solar power plants. The P&V test hardware consists of two pumped loops; the “Hot Loop” to simulate the hot (565°C) side of the receiver and the “Cold Loop” to simulate the receiver’s cold (285°C) side. Each loop contains a pump and five valves sized to be representative of a conceptual 60-MWe commercial solar power plant design. The hot loop accumulated over 6700 hours of operation and the cold loop over 2500 hours of operation. This project has demonstrated that standard commercial scale pump and valve designs will work in molten salt. The test also exposed some pitfalls that must be avoided in specifying such equipment. Although certainly not all of the pitfalls were discovered, careful design and specification should result in reliable or at least workable equipment.

CO2-shielded arc as a high-intensity heat source

Vacuum ◽  
2006 ◽  
Vol 80 (11-12) ◽  
pp. 1195-1198 ◽  
Author(s):  
Manabu Tanaka ◽  
Shinichi Tashiro ◽  
Masao Ushio ◽  
Tsuneo Mita ◽  
Anthony B. Murphy ◽  
...  
Keyword(s):  
Heat Source ◽  
High Intensity
Sign in / Sign up

Export Citation Format

Share Document