scholarly journals Engineering evaluation/cost analysis for the proposed decontamination of properties in the vicinity of the Hazelwood Interim Storage Site, Hazelwood, Missouri -- environment assessment

1991 ◽  
Author(s):  
M H Picel ◽  
J M Peterson ◽  
M J Williams
Keyword(s):  
Cost Analysis ◽  
Storage Site ◽  
Environment Assessment ◽  
Interim Storage

Waste Handling and Storage in the Decontamination Pilot Projects of JAEA for Environments of Fukushima

2013 ◽  
Author(s):  
S. Nakayama ◽  
K. Kawase ◽  
K. Iijima ◽  
M. Kato
Keyword(s):  
Mechanical Stability ◽  
Storage Site ◽  
Pilot Projects ◽  
Energy Agency ◽  
Temporary Storage ◽  
Site Monitoring ◽  
Radiation Monitors ◽  
Waste Handling ◽  
Interim Storage ◽  
Storage Structures

After the Fukushima Daiichi nuclear accident, Japan Atomic Energy Agency (JAEA) was chosen by the national government to conduct decontamination pilot projects at selected sites in Fukushima prefecture. Despite tight boundary conditions in terms of timescale and resources, the projects served their primary purpose to develop a knowledge base to support more effective planning and implementation of stepwise regional remediation of the evacuated zone. A range of established, modified and newly developed techniques were tested under realistic field conditions and their performance characteristics were determined. The results of the project can be summarized in terms of site characterization, cleanup and waste management. A range of options were investigated to reduce the volumes of waste produced and to ensure that decontamination water could be cleaned to the extent that it could be discharged to normal drainage. Resultant solid wastes were packaged in standard flexible containers, labelled and stored at the remediation site (temporary storage until central interim storage becomes available). The designs of such temporary storage facilities were tailored to available sites, but all designs included measures to ensure mechanical stability (e.g., filling void spaces between containers with sand, graded cover with soil) and prevent releases to groundwater (impermeable base and cap, gravity flow drainage including radiation monitors and catch tanks). Storage site monitoring was also needed to check that storage structures would not be perturbed by external events that could include typhoons, heavy snowfalls, freeze/thaw cycles and earthquakes.

Influence of Impact Angle and Real Target Properties on Drop Test Results of Cubic Containers

2017 ◽  
Author(s):  
Uwe Zencker ◽  
Linan Qiao ◽  
Holger Völzke
Keyword(s):  
Free Fall ◽  
Impact Angle ◽  
Drop Test ◽  
Storage Site ◽  
Flat Bottom ◽  
Energy Agency ◽  
Accident Scenarios ◽  
Interim Storage ◽  
The Impact ◽  
Real Target

Drop test scenarios with cubic containers without impact limiters at interim storage sites or in a final repository have been investigated by numerical simulations. An ideally flat drop is impossible to conduct as a free fall of a container even under laboratory conditions. Dynamic stresses and strains inside the container structure are sensitive to the impact angle. Even very small impact angles cause remarkable changes in the experimental or numerical results when a flat bottom or wall of a container hits a flat target. For drop tests with transport packages the International Atomic Energy Agency (IAEA) regulations define an essentially unyielding target. In contrast, potential accident scenarios for storage containers are derived from site-specific safety analyses or acceptance criteria in Germany. Each interim storage site or repository has a yielding or so-called real target with individual structural and material properties. The real target acts as a kind of impact limiter. A more conservative container design is required if the impact limiting effect of the target is not considered.

Long Term Storage of Nuclear Spent Fuel as Key Role of Japan’s Nuclear Fuel Cycle Until 2100: Cost and Benefit

2010 ◽  
Author(s):  
Tadahiro Katsuta
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Nuclear Fuel Cycle ◽  
Storage Site ◽  
Spent Fuel ◽  
Final Disposal ◽  
Enriched Uranium ◽  
Interim Storage ◽  
Reprocessing Plant

Political and technical advantages to introduce spent nuclear fuel interim storage into Japan’s nuclear fuel cycle are examined. Once Rokkasho reprocessing plant starts operation, 80,000 tHM of spent Low Enriched Uranium (LEU) fuel must be stored in an Away From Reactor (AFR) interim storage site until 2100. If a succeeding reprocessing plant starts operating, the spent LEU will reach its peak of 30,000 tHM before 2050, and then will decrease until the end of the second reprocessing plant operation. Throughput of the second reprocessing plant is assumed as twice of that of Rokassho reprocessing plant, indeed 1,600tHM/year. On the other hand, tripled number of final disposal sites for High Level Nuclear Waste (HLW) will be necessary with this condition. Besides, large amount of plutonium surplus will occur, even if First Breeder Reactors (FBR)s consume the plutonium. At maximum, plutonium surplus will reach almost 500 tons. These results indicate that current nuclear policy does not solve the spent fuel problems but rather complicates them. Thus, reprocessing policy could put off the problems in spent fuel interim storage capacity and other issues could appear such as difficulties in large amount of HLW final disposal management or separated plutonium management. If there is no reprocessing or MOX use, the amount of spent fuel will reach over 115,000 tones at the year of 2100. However, the spent fuel management could be simplified and also the cost and the security would be improved by using an interim storage primarily.

Sign in / Sign up

Export Citation Format

Share Document