scholarly journals Final report on low-cycle fatigue and creep-fatigue testing of salt-filled alloy 800 specimens

1982 ◽  
Author(s):  
J Kaae
Keyword(s):  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
Final Report ◽  
Cycle Fatigue ◽  
Alloy 800 ◽  
Creep Fatigue

Low Cycle Fatigue and Creep-Fatigue Behavior of Alloy 617 at High Temperature

2013 ◽  
Vol 135 (6) ◽  
Author(s):  
Celine Cabet ◽  
Laura Carroll ◽  
Richard Wright
Keyword(s):  
High Temperature ◽  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
Fatigue Behavior ◽  
Dominant Role ◽  
Hold Time ◽  
Outlet Temperature ◽  
Cycle Fatigue ◽  
Alloy 617 ◽  
Creep Fatigue

Alloy 617 is the leading candidate material for an intermediate heat exchanger (IHX) application of the very high temperature nuclear reactor (VHTR), expected to have an outlet temperature as high as 950 °C. Acceptance of Alloy 617 in Section III of the ASME Code for nuclear construction requires a detailed understanding of the creep-fatigue behavior. Initial creep-fatigue work on Alloy 617 suggests a more dominant role of environment with increasing temperature and/or hold times evidenced through changes in creep-fatigue crack growth mechanisms and failure life. Continuous cycle fatigue and creep-fatigue testing of Alloy 617 was conducted at 950 °C and 0.3% and 0.6% total strain in air to simulate damage modes expected in a VHTR application. Continuous cycle fatigue specimens exhibited transgranular cracking. Intergranular cracking was observed in the creep-fatigue specimens and the addition of a hold time at peak tensile strain degraded the cycle life. This suggests that creep-fatigue interaction occurs and that the environment may be partially responsible for accelerating failure.

Low Cycle Fatigue and Creep-Fatigue Interaction Behaviour of Reduced Activation Ferritic Martensitic (RAFM) Steels with Varying W and Ta Contents

2014 ◽  
Vol 891-892 ◽  
pp. 383-388 ◽  
Author(s):  
R. Sandhya ◽  
Vani Shankar ◽  
K. Mariappan ◽  
M.D. Mathew ◽  
Tammana Jayakumar ◽  
...  
Keyword(s):  
Elevated Temperatures ◽  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
Total Strain ◽  
Dynamic Strain ◽  
Total Strain Amplitude ◽  
Cycle Fatigue ◽  
Dynamic Strain Ageing ◽  
Strain Ageing ◽  
Creep Fatigue

Reduced activation ferritic/martensitic (RAFM) steels are candidate materials for the test blanket modules of ITER. Several degradation mechanisms such as thermal fatigue, low cycle fatigue, creep fatigue interaction, creep, irradiation hardening, swelling and phase instability associated irradiation embrittlement must be understood to estimate the component lifetime. The current work focuses on the effect of tungsten and tantalum on low cycle fatigue (LCF) and creep-fatigue interaction (CFI) behavior of four RAFM steels with varying W and Ta contents. Total strain controlled LCF experiments were performed under various strain amplitudes in the range +0.25% to +1% and temperatures (300 K to 873 K) in air at a constant strain rate of 3×10-3s-1 using a servo hydraulic fatigue testing system. CFI experiments were carried out at total strain amplitude of +0.6% and by applying strain hold of different durations (10 min and 30 min) in peak tension and peak compression. Both LCF and CFI life of the RAFM steels improved with the increase in tungsten and tantalum contents. Based on the amount of softening during continuous cycling, tungsten content was optimized at 1.4 wt. % and the tantalum content at 0.06 wt%. Stress relaxation obtained during creep-fatigue interaction studies showed close relation with the chemical composition of the RAFM steels. Other damaging parameters influencing fatigue life were dynamic strain ageing (DSA) occurring in the intermediate temperature regime and oxidation at elevated temperatures. Keywords: RAFM steel, low cycle fatigue, dynamic strain ageing, creep-fatigue interaction, oxidation

scholarly journals Fatigue Testing of Wearable Sensing Technologies: Issues and Opportunities

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4070
Author(s):  
Andrea Karen Persons ◽  
John E. Ball ◽  
Charles Freeman ◽  
David M. Macias ◽  
Chartrisa LaShan Simpson ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Prediction Models ◽  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
Wearable Sensors ◽  
Fatigue Tests ◽  
Proof Of Concept ◽  
Cycle Fatigue ◽  
Wearable Sensing ◽  
Failure Data

Standards for the fatigue testing of wearable sensing technologies are lacking. The majority of published fatigue tests for wearable sensors are performed on proof-of-concept stretch sensors fabricated from a variety of materials. Due to their flexibility and stretchability, polymers are often used in the fabrication of wearable sensors. Other materials, including textiles, carbon nanotubes, graphene, and conductive metals or inks, may be used in conjunction with polymers to fabricate wearable sensors. Depending on the combination of the materials used, the fatigue behaviors of wearable sensors can vary. Additionally, fatigue testing methodologies for the sensors also vary, with most tests focusing only on the low-cycle fatigue (LCF) regime, and few sensors are cycled until failure or runout are achieved. Fatigue life predictions of wearable sensors are also lacking. These issues make direct comparisons of wearable sensors difficult. To facilitate direct comparisons of wearable sensors and to move proof-of-concept sensors from “bench to bedside,” fatigue testing standards should be established. Further, both high-cycle fatigue (HCF) and failure data are needed to determine the appropriateness in the use, modification, development, and validation of fatigue life prediction models and to further the understanding of how cracks initiate and propagate in wearable sensing technologies.

Component Low Cycle Fatigue Behavior Based on Standard Calculation Procedure and Non-Linear FEA

2017 ◽  
Author(s):  
Jürgen Rudolph ◽  
Adrian Willuweit ◽  
Steffen Bergholz ◽  
Christian Philippek ◽  
Jevgenij Kobzarev
Keyword(s):  
Power Plants ◽  
Low Cycle Fatigue ◽  
Fatigue Behavior ◽  
Hybrid Approach ◽  
Combined Cycle ◽  
Cycle Fatigue ◽  
Element Analysis ◽  
Constitutive Material Model ◽  
Standard Design ◽  
Creep Fatigue

Components of conventional power plants are subject to potential damage mechanisms such as creep, fatigue and their combination. These mechanisms have to be considered in the mechanical design process. Against this general background — as an example — the paper focusses on the low cycle fatigue behavior of a main steam shut off valve. The first design check based on standard design rules and linear Finite Element Analysis (FEA) identifies fatigue sensitive locations and potentially high fatigue usage. This will often occur in the context of flexible operational modes of combined cycle power plants which are a characteristic of the current demands of energy supply. In such a case a margin analysis constitutes a logical second step. It may comprise the identification of a more realistic description of the real operational loads and load-time histories and a refinement of the (creep-) fatigue assessment methods. This constitutes the basis of an advanced component design and assessment. In this work, nonlinear FEA is applied based on a nonlinear kinematic constitutive material model, in order to simulate the thermo-mechanical behavior of the high-Cr steel component mentioned above. The required material parameters are identified based on data of the accessible reference literature and data from an own test series. The accompanying testing campaign was successfully concluded by a series of uniaxial thermo-mechanical fatigue (TMF) tests simulating the most critical load case of the component. This detailed and hybrid approach proved to be appropriate for ensuring the required lifetime period of the component.

Crack mode and life of Ti-6Al-4V under multiaxial low cycle fatigue

2015 ◽  
Author(s):  
Takamoto Itoh ◽  
Masao Sakane ◽  
Takahiro Morishita ◽  
Hiroshi Nakamura ◽  
Masahiro Takanashi
Keyword(s):  
Hollow Cylinder ◽  
Stress Ratio ◽  
Biaxial Loading ◽  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
Testing Machine ◽  
Multiaxial Fatigue ◽  
Cycle Fatigue ◽  
Loading Test ◽  
Failure Life

This paper studies multiaxial low cycle fatigue crack mode and failure life of Ti-6Al-4V. Stress controlled fatigue tests were carried out using a hollow cylinder specimen under multiaxial loadings of ?=0, 0.4, 0.5 and 1 of which stress ratio R=0 at room temperature. ? is a principal stress ratio and is defined as ?=sigmaII/sigmaI, where sigmaI and sigmaII are principal stresses of which absolute values take the largest and middle ones, respectively. Here, the test at ?=0 is a uniaxial loading test and that at ?=1 an equi-biaxial loading test. A testing machine employed is a newly developed multiaxial fatigue testing machine which can apply push-pull and reversed torsion loadings with inner pressure onto the hollow cylinder specimen. Based on the obtained results, this study discusses evaluation of the biaxial low cycle fatigue life and crack mode. Failure life is reduced with increasing ? induced by cyclic ratcheting. The crack mode is affected by the surface condition of cut-machining and the failure life depends on the crack mode in the multiaxial loading largely.

scholarly journals Low-cycle fatigue behaviour of laser welded high-strength steel DOMEX 700 MC

2018 ◽  
Vol 157 ◽  
pp. 05013 ◽  
Author(s):  
Peter Kopas ◽  
Milan Sága ◽  
František Nový ◽  
Bohuš Leitner
Keyword(s):  
Fatigue Life ◽  
Welded Joints ◽  
High Strength Steel ◽  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
High Strength ◽  
Fatigue Behaviour ◽  
Total Strain Amplitude ◽  
Cycle Fatigue ◽  
Fatigue Life Analysis

The article presents the results of research on low cycle fatigue strength of laser welded joints vs. non-welded material of high-strength steel DOMEX 700 MC. The tests were performed under load controlled using the total strain amplitude ɛac. The operating principle of the special electro-mechanic fatigue testing equipment with a suitable clamping system was working on 35 Hz frequency. Fatigue life analysis was conducted based on the Manson-Coffin-Basquin equation, which made it possible to determine fatigue parameters. Studies have shown differences in the fatigue life of original specimens and laser welded joints analysed, where laser welded joints showed lower fatigue resistance. In this article a numerical analysis of stresses generated in bending fatigue specimens has been performed employing the commercially available FEM-program ADINA.

Low-cycle fatigue testing of extruded aluminium alloy buckling-restrained braces

2013 ◽  
Vol 46 ◽  
pp. 294-301 ◽  
Author(s):  
Chun-Lin Wang ◽  
Tsutomu Usami ◽  
Jyunki Funayama ◽  
Fumiaki Imase
Keyword(s):  
Aluminium Alloy ◽  
Fatigue Testing ◽  
Low Cycle Fatigue ◽  
Cycle Fatigue ◽  
Buckling Restrained Braces ◽  
Extruded Aluminium Alloy
Sign in / Sign up

Export Citation Format

Share Document