scholarly journals Dynamic simulation of multi-pass pressurized water nuclear power plants by analog computer techniques

1961 ◽  
Author(s):  
J. O. Brondel
Keyword(s):  
Dynamic Simulation ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Analog Computer ◽  
Pressurized Water

scholarly journals Calculation of Potential Radiation Doses Associated with Predisposal Management of Dismantled Steam Generators from Nuclear Power Plants

2020 ◽  
Vol 12 (12) ◽  
pp. 5149
Author(s):  
Ga Hyun Chun ◽  
Jin-ho Park ◽  
Jae Hak Cheong
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Radiation Doses ◽  
Steam Generators ◽  
Pressurized Water ◽  
Water Reactor ◽  
General Pathway ◽  
Heavy Water Reactor ◽  
Past Experiences

Although the generation of large components from nuclear power plants is expected to gradually increase in the future, comprehensive studies on the radiological risks of the predisposal management of large components have been rarely reported in open literature. With a view to generalizing the assessment framework for the radiological risks of the processing and transport of a representative large component—a steam generator—12 scenarios were modeled in this study based on past experiences and practices. In addition, the general pathway dose factors normalized to the unit activity concentration of radionuclides for processing and transportation were derived. Using the general pathway dose factors, as derived using the approach established in this study, a specific assessment was conducted for steam generators from a pressurized water reactor (PWR) or a pressurized heavy water reactor (PHWR) in Korea. In order to demonstrate the applicability of the developed approach, radiation doses reported from actual experiences and studies are compared to the calculated values in this study. The applicability of special arrangement transportation of steam generators assumed in this study is evaluated in accordance with international guidance. The generalized approach to assessing the radiation doses can be used to support optimizing the predisposal management of large components in terms of radiological risk.

scholarly journals Small nuclear power plants for power supply in arctic regions: assessment of spent nuclear fuel radioactivity

2018 ◽  
Vol 4 (2) ◽  
pp. 119-125
Author(s):  
Vadim Naumov ◽  
Sergey Gusak ◽  
Andrey Naumov
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fuel Cycle ◽  
Mass Composition ◽  
Published Data ◽  
Pressurized Water ◽  
Fuel Cycles ◽  
Reactor Cores

The purpose of the present study is the investigation of mass composition of long-lived radionuclides accumulated in the fuel cycle of small nuclear power plants (SNPP) as well as long-lived radioactivity of spent fuel of such reactors. Analysis was performed of the published data on the projects of SNPP with pressurized water-cooled reactors (LWR) and reactors cooled with Pb-Bi eutectics (SVBR). Information was obtained on the parameters of fuel cycle, design and materials of reactor cores, thermodynamic characteristics of coolants of the primary cooling circuit for reactor facilities of different types. Mathematical models of fuel cycles of the cores of reactors of ABV, KLT-40S, RITM-200M, UNITERM, SVBR-10 and SVBR-100 types were developed. The KRATER software was applied for mathematical modeling of the fuel cycles where spatial-energy distribution of neutron flux density is determined within multi-group diffusion approximation and heterogeneity of reactor cores is taken into account using albedo method within the reactor cell model. Calculation studies of kinetics of burnup of isotopes in the initial fuel load (235U, 238U) and accumulation of long-lived fission products (85Kr, 90Sr, 137Cs, 151Sm) and actinoids (238,239,240,241,242Pu, 236U, 237Np, 241Am, 244Cm) in the cores of the examined SNPP reactor facilities were performed. The obtained information allowed estimating radiation characteristics of irradiated nuclear fuel and implementing comparison of long-lived radioactivity of spent reactor fuel of the SNPPs under study and of their prototypes (nuclear propulsion reactors). The comparison performed allowed formulating the conclusion on the possibility in principle (from the viewpoint of radiation safety) of application of SNF handling technology used in prototype reactors in the transportation and technological process layouts of handling SNF of SNPP reactors.

AFCEN RCC-F: A New Standard for the Fire Protection Design of New Built Light Water Nuclear Power Plants

2018 ◽  
Author(s):  
Bernard Gautier ◽  
Mickael Cesbron ◽  
Richard Tulinski
Keyword(s):  
Fire Protection ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fire Hazard ◽  
Pressurized Water ◽  
Light Water ◽  
Protection Scheme ◽  
Safety Case ◽  
Under Construction

Fire hazard is an important issue for the safety of nuclear power plants: the main internal hazard in terms of frequency, and probably one the most significant with regards to the design costs. AFCEN is publishing in 2018 a new code for fire protection of new built PWR nuclear plants, so-called RCC-F. This code is an evolution of the former ETC-F code which has been applied to different EPR plants under construction (Flamanville 3 (FA3, France), Hinkley Point C (HPC, United Kingdom), Taïshan (TSN, China)). The RCC-F code presents significant enhancement and evolutions resulting from eight years of work by the AFCEN dedicated sub-committee, involving a panel of contributors from the nuclear field. It is now opened to any type of PWR (Pressurized Water Reactor) type of nuclear power plants and not any longer limited to EPR (European Pressurized Reactor) plants. It can potentially be adapted to other light water concepts. Its objective is to help engineers design the fire prevention and protection scheme, systems and equipment with regards to the safety case and the defense in depth taking into account the French and European experience in the field. It deals also with the national regulations, with two appendices dedicated to French and British regulations respectively. The presentation gives an overview of the code specifications and focuses on the significant improvements.

Background on Low Temperature Overpressure Protection System Setpoints for Pressure-Temperature Curves

2020 ◽  
Author(s):  
Jeffrey C. Poehler ◽  
Gary L. Stevens ◽  
Anees A. Udyawar ◽  
Amy Freed
Keyword(s):  
Low Temperature ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Pressure Vessels ◽  
Pressurized Water Reactors ◽  
Documentation System ◽  
Pressurized Water ◽  
System Pressure ◽  
Water Reactors

Abstract ASME Code, Section XI, Nonmandatory Appendix G (ASME-G) provides a methodology for determining pressure and temperature (P-T) limits to prevent non-ductile failure of nuclear reactor pressure vessels (RPVs). Low-Temperature Overpressure Protection (LTOP) refers to systems in nuclear power plants that are designed to prevent inadvertent challenges to the established P-T limits due to operational events such as unexpected mass or temperature additions to the reactor coolant system (RCS). These systems were generally added to commercial nuclear power plants in the 1970s and 1980s to address regulatory concerns related to LTOP events. LTOP systems typically limit the allowable system pressure to below a certain value during plant operation below the LTOP system enabling temperature. Major overpressurization of the RCS, if combined with a critical size crack, could result in a brittle failure of the RPV. Failure of the RPV could make it impossible to provide adequate coolant to the reactor core and result in a major core damage or core melt accident. This issue affected the design and operation of all pressurized water reactors (PWRs). This paper provides a description of an investigation and technical evaluation regarding LTOP setpoints that was performed to review the basis of ASME-G, Paragraph G-2215, “Allowable Pressure,” which includes provisions to address pressure and temperature limitations in the development of P-T curves that incorporate LTOP limits. First, high-level summaries of the LTOP issue and its resolution are provided. LTOP was a significant issue for pressurized water reactors (PWRs) starting in the 1970s, and there are many reports available within the U.S. Nuclear Regulatory Commission’s (NRC’s) documentation system for this topic, including Information Notices, Generic Letters, and NUREGs. Second, a particular aspect of LTOP as related to ASME-G requirements for LTOP is discussed. Lastly, a basis is provided to update Appendix G-2215 to state that LTOP setpoints are based on isothermal (steady-state) conditions. This paper was developed as part of a larger effort to document the technical bases behind ASME-G.

Comparison of Nuclear Fitness for Service Codes: ASME Section XI and RSE-M AFCEN Codes

2014 ◽  
Author(s):  
Claude Faidy
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Light Water Reactors ◽  
Pressurized Water ◽  
Term Operation ◽  
Mechanical Components ◽  
Water Reactors ◽  
Test Requirements ◽  
Service Inspection

Two major Codes are used for Fitness for Service of Nuclear Power Plants: one is the ASME B&PV Code Section XI and the other one is the French RSE-M Code. Both of them are largely used in many countries, partially or totally. The last 2013 RSE-M covers “Mechanical Components of Pressurized Water Reactors (PWRs): - Pre-service and In-service inspection - Surveillance in operation or during shutdown - Flaw evaluation - Repairs-Replacements parts for plant in operation - Pressure tests The last 2013 ASME Section XI covers “Mechanical components and containment of Light Water Reactors (LWRs)” and has a larger scope with similar topics: more types of plants (PWR and Boiling Water Reactor-BWR), other components like metallic and concrete containments… The paper is a first comparison covering the scope, the jurisdiction, the general organization of each section, the major principles to develop In Service Inspection, Repair-Replacement activities, the flaw evaluation rules, the pressure test requirements, the surveillance procedures (monitoring…) and the connections with Design Codes… These Codes are extremely important for In-service inspection programs in particular and essential tools to justify long term operation of Nuclear Power Plants.

Sign in / Sign up

Export Citation Format

Share Document