scholarly journals Machine tool accuracy characterization workshops. Final report, May 5, 1992--November 5 1993

1995 ◽  
Author(s):  
Keyword(s):  
Machine Tool ◽  
Final Report ◽  
Machine Tool Accuracy

The Coupling Characteristic of HSK Tool-Holder/Spindle Interface for High-Speed NC Machine Tool

2014 ◽  
Vol 590 ◽  
pp. 121-125 ◽  
Author(s):  
Wen Kai Jie ◽  
Jian Chen ◽  
Deng Sheng Zheng ◽  
Gui Cheng Wang
Keyword(s):  
Machine Tool ◽  
Rotational Speed ◽  
High Speed ◽  
Nonlinear Finite Element Method ◽  
High Rotational Speed ◽  
Tool Holder ◽  
Nc Machine Tool ◽  
Machine Tool Accuracy ◽  
Nc Machine ◽  
Coupling Characteristic

The coupling characteristic of the tool-holder/spindle interface in high speed NC machine has significant influence on machine tool accuracy and process stability. With the example of HSK-E63, based on nonlinear finite element method (FEM), the coupling characteristic of the tool-holder/spindle interface under high rotational speed was investigated, the influence of interference, clamping force and rotational speed on the contact stress and the sectional area of clearance were discussed in detail. The results can be used as theoretical consideration to design and optimize the high speed tool-holder/spindle interface.

scholarly journals Effect of Supply Cooling Oil Temperature in Structural Cooling Channels on the Positioning Accuracy of Machine Tools

2019 ◽  
Vol 35 (6) ◽  
pp. 887-900 ◽  
Author(s):  
K.-Y. Li ◽  
W.-J. Luo ◽  
M.-H. Yang ◽  
X.-H. Hong ◽  
S.-J. Luo ◽  
...  
Keyword(s):  
Machine Tool ◽  
Thermal Deformation ◽  
Thermal Error ◽  
Machining Accuracy ◽  
Feed System ◽  
Positioning Accuracy ◽  
Cooling Channels ◽  
Position Accuracy ◽  
Machine Tool Accuracy ◽  
Volume Method

ABSTRACTIn this study, the thermal deformation of a machine tool structure due to the heat generated during operation was analyzed, and embedded cooling channels were applied to exchange the heat generated during the operation to achieve thermal error suppression. Then, the finite volume method was used to simulate the effect of cooling oil temperature on thermal deformation, and the effect of thermal suppression was experimentally studied using a feed system combined with a cooler to improve the positioning accuracy of the machine tool. In this study, the supply oil temperature in the structural cooling channels was found to significantly affect the position accuracy of the moving table and moving carrier. If the supply oil temperature in the cooling channels is consistent with the operational ambient temperature, the position accuracy of the moving table in the Y direction and the moving carrier in the X and Z directions has the best performance under different feed rates. From the thermal suppression experiments of the embedded cooling channels, the positioning accuracy of the feed system can be improved by approximately 25.5 % during the dynamic feeding process. Furthermore, when the hydrostatic guideway is cooled and dynamic feeding is conducted, positioning accuracy can be improved by up to 47.8 %. The machining accuracy can be improved by approximately 60 % on average by using the embedded cooling channels in this study. Therefore, thermal suppression by the cooling channels in this study can not only effectively improve the positioning accuracy but also enhance machining accuracy, proving that the method is effective for enhancing machine tool accuracy.

Analysis on Effect of Cooling Oil Temperature on Cutting Stability of Gear Shaping Machine

2014 ◽  
Vol 651-653 ◽  
pp. 647-650
Author(s):  
Hai Tao Yu ◽  
Lie Chen ◽  
Chang Bing Zhou ◽  
Rui Wen Guo
Keyword(s):  
Machine Tool ◽  
Processing System ◽  
Cutting Stability ◽  
Capability Index ◽  
Cutting Test ◽  
Machine Tool Accuracy ◽  
The Stability ◽  
Gear Shaping ◽  
Accuracy And Stability

With the demands of machine tool accuracy and stability for manufacturing are getting higher and higher, the effect of cooling oil is increasingly evident. And it is proved that cooling oil temperature is an important factor for machine cutting precision and stability. Continuous cutting test was carried on and values of over pin dial (M) were measured. The results show that it has large effect of cooling oil temperature on the stability of M-value. Subsequently, test of machine capability index (CMK) was carried on. And it was verified that the CMK of gear shaping machine is larger than 1.67. And the results show that the fluctuation of M values is the smallest when cooling oil temperature is 33°C. Lowest time costing for adjusting the processing system, highest cutting accuracy, and smallest value of stable amplitude for Gear Shaping Machine could be obtained at this condition.

Machine Tool Accuracy and Metrology

2015 ◽  
pp. 95-111
Author(s):  
Steven Y. Liang ◽  
Albert J. Shih
Keyword(s):  
Machine Tool ◽  
Machine Tool Accuracy

scholarly journals Virtual machining system simulator: analysis of machine tool accuracy

2018 ◽  
Vol 25 ◽  
pp. 338-343 ◽  
Author(s):  
Nikolas Theissen ◽  
Theodoros Laspas ◽  
Károly Szipka ◽  
Andreas Archenti
Keyword(s):  
Machine Tool ◽  
Virtual Machining ◽  
Machine Tool Accuracy ◽  
Machining System

scholarly journals Adaptive decision support for suggesting a machine tool maintenance strategy

2018 ◽  
Vol 24 (3) ◽  
pp. 376-399 ◽  
Author(s):  
Abubaker Shagluf ◽  
Simon Parkinson ◽  
Andrew Peter Longstaff ◽  
Simon Fletcher
Keyword(s):  
Decision Support ◽  
Machine Tool ◽  
Cost Estimation ◽  
Expert Knowledge ◽  
Production Costs ◽  
Maintenance Cost ◽  
Maintenance Strategy ◽  
Content Type ◽  
Machine Tool Accuracy

Purpose The purpose of this paper is to produce a decision support aid for machine tool owners to utilise while deciding upon a maintenance strategy. Furthermore, the decision support tool is adaptive and capable of suggesting different strategies by monitoring for any change in machine tool manufacturing accuracy. Design/methodology/approach A maintenance cost estimation model is utilised within the research and development of this decision support system (DSS). An empirical-based methodology is pursued and validated through case study analysis. Findings A case study is provided where a schedule of preventative maintenance actions is produced to reduce the need for the future occurrences of reactive maintenance actions based on historical machine tool accuracy information. In the case study, a 28 per cent reduction in predicted accuracy-related expenditure is presented, equating to a saving of £14k per machine over a five year period. Research limitations/implications The emphasis on improving machine tool accuracy and reducing production costs is increasing. The presented research is pioneering in the development of a software-based tool to help reduce the requirement on domain-specific expert knowledge. Originality/value The paper presents an adaptive DSS to assist with maintenance strategy selection. This is the first of its kind and is able to suggest a preventative strategy for those undertaking only reactive maintenance. This is of value for both manufacturers and researchers alike. Manufacturers will benefit from reducing maintenance costs, and researchers will benefit from the development and application of a novel decision support technique.

A general methodology for machine tool accuracy enhancement by error compensation

1986 ◽  
Vol 8 (4) ◽  
pp. 187-196 ◽  
Author(s):  
M.A. Donmez ◽  
D.S. Blomquist ◽  
R.J. Hocken ◽  
C.R. Liu ◽  
M.M. Barash
Keyword(s):  
Machine Tool ◽  
Error Compensation ◽  
Accuracy Enhancement ◽  
General Methodology ◽  
Machine Tool Accuracy
Sign in / Sign up

Export Citation Format

Share Document