scholarly journals COLFTAR: a real-time electro-optical system for two-dimensional Fourier transforms

1973 ◽  
Author(s):  
Douglas Stuart Sand
Keyword(s):  
Real Time ◽  
Optical System ◽  
Fourier Transforms ◽  
Two Dimensional

CALCULATION OF THE DEPENDENCE OF THE DISTANCE TO THE LOCATED OBJECT FROM THE CORNER POSITION OF THE VEHICLE LINE

2018 ◽  
pp. 14-18
Author(s):  
V. V. Artyushenko ◽  
A. V. Nikulin
Keyword(s):  
Real Time ◽  
Statistical Physics ◽  
Angular Position ◽  
Three Dimensional ◽  
Line Of Sight ◽  
Two Dimensional ◽  
Radar Station ◽  
Flight Mode ◽  
Vector Algebra ◽  
Analytical Expressions

To simulate echoes from the earth’s surface in the low flight mode, it is necessary to reproduce reliably the delayed reflected sounding signal of the radar in real time. For this, it is necessary to be able to calculate accurately and quickly the dependence of the distance to the object being measured from the angular position of the line of sight of the radar station. Obviously, the simplest expressions for calculating the range can be obtained for a segment or a plane. In the text of the article, analytical expressions for the calculation of range for two-dimensional and three-dimensional cases are obtained. Methods of statistical physics, vector algebra, and the theory of the radar of extended objects were used. Since the calculation of the dependence of the range of the object to the target from the angular position of the line of sight is carried out on the analytical expressions found in the paper, the result obtained is accurate, and due to the relative simplicity of the expressions obtained, the calculation does not require much time.

Accelerating laser processes with a smart two-dimensional polygon mirror scanner for ultra-fast beam deflection

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Florian Roessler ◽  
André Streek
Keyword(s):  
Energy Distribution ◽  
Real Time ◽  
Laser Processing ◽  
High Speed ◽  
Beam Deflection ◽  
Two Dimensional ◽  
Heat Accumulation ◽  
Field Programmable ◽  
Drill Holes ◽  
Average Laser

Abstract In laser processing, the possible throughput is directly scaling with the available average laser power. To avoid unwanted thermal damage due to high pulse energy or heat accumulation during MHz-repetition rates, energy distribution over the workpiece is required. Polygon mirror scanners enable high deflection speeds and thus, a proper energy distribution within a short processing time. The requirements of laser micro processing with up to 10 kW average laser powers and high scan speeds up to 1000 m/s result in a 30 mm aperture two-dimensional polygon mirror scanner with a patented low-distortion mirror configuration. In combination with a field programmable gate array-based real-time logic, position-true high-accuracy laser switching is enabled for 2D, 2.5D, or 3D laser processing capable to drill holes in multi-pass ablation or engraving. A special developed real-time shifter module within the high-speed logic allows, in combination with external axis, the material processing on the fly and hence, processing of workpieces much larger than the scan field.

Real-time superresolution optical system using multiple lasers and a TV system

1976 ◽  
Vol 15 (4) ◽  
pp. 851
Author(s):  
Takuso Sato ◽  
Mitsuhiro Ueda ◽  
Ichiro Ogasawara
Keyword(s):  
Real Time ◽  
Optical System

scholarly journals High-Bandpass Filters in Electrocardiography: Source of Error in the Interpretation of the ST Segment

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
F. Buendía-Fuentes ◽  
M. A. Arnau-Vives ◽  
A. Arnau-Vives ◽  
Y. Jiménez-Jiménez ◽  
J. Rueda-Soriano ◽  
...  
Keyword(s):  
Real Time ◽  
Fourier Transforms ◽  
Pass Filter ◽  
Discrete Fourier Transforms ◽  
Real Time Mode ◽  
Asymptomatic Patients ◽  
St Segment ◽  
Coronary Syndromes ◽  
Clinically Significant ◽  
High Pass

Introduction. Artifactual variations in the ST segment may lead to confusion with acute coronary syndromes. Objective. To evaluate how the technical characteristics of the recording mode may distort the ST segment. Material and Method. We made a series of electrocardiograms using different filter configurations in 45 asymptomatic patients. A spectral analysis of the electrocardiograms was made by discrete Fourier transforms, and an accurate recomposition of the ECG signal was obtained from the addition of successive harmonics. Digital high-pass filters of 0.05 and 0.5 Hz were used, and the resulting shapes were compared with the originals. Results. In 42 patients (93%) clinically significant alterations in ST segment level were detected. These changes were only seen in “real time mode” with high-pass filter of 0.5 Hz. Conclusions. Interpretation of the ST segment in “real time mode” should only be carried out using high-pass filters of 0.05 Hz.

scholarly journals Strong second harmonic generation in SiC, ZnO, GaN two-dimensional hexagonal crystals from first-principles many-body calculations

2015 ◽  
Vol 17 (14) ◽  
pp. 9533-9540 ◽  
Author(s):  
C. Attaccalite ◽  
A. Nguer ◽  
E. Cannuccia ◽  
M. Grüning
Keyword(s):  
Second Harmonic Generation ◽  
Real Time ◽  
Harmonic Generation ◽  
First Principles ◽  
Function Theory ◽  
Second Harmonic ◽  
Two Dimensional ◽  
Many Body ◽  
Ti:Sapphire Laser ◽  
Hexagonal Crystals

By using a real-time approach based on Green's function theory we predict a strong second-harmonic generation (SHG) for frequencies at which Ti:sapphire laser operates and for which the materials are transparent.

Sign in / Sign up

Export Citation Format

Share Document