scholarly journals ROLLING AND WELDING TYPE 430M TUBES TO STAINLESS STEEL OVERLAID CARBON STEEL TUBE-SHEETS. SM-1 (APPR-1) RESEARCH AND DEVELOPMENT PROGRAM. Task No. X.

1959 ◽  
Author(s):  
R.W. Bennett ◽  
R.P. Meister ◽  
R.J. Kerton
Keyword(s):  
Stainless Steel ◽  
Carbon Steel ◽  
Research And Development ◽  
Development Program ◽  
Steel Tube

Production Process and Heat Transfer Performance of 10/316 Clad Tube

2014 ◽  
Vol 1081 ◽  
pp. 270-274
Author(s):  
Zui Xian Yu ◽  
Xue Sheng Wang ◽  
Qin Zhu Chen
Keyword(s):  
Heat Transfer ◽  
Stainless Steel ◽  
Heat Transfer Coefficient ◽  
Carbon Steel ◽  
Transfer Coefficient ◽  
Heat Transfer Performance ◽  
Steel Tube ◽  
Stainless Steel Tube ◽  
Transfer Performance ◽  
Clad Tube

A new preparation technique of carbon steel/stainless steel clad tube was introduced, and the contact surface was well combined. Meanwhile, with the using of tube heat exchanger, the experiment on the heat transfer performance of the clad tube was done. Comparing the 10/316 clad tube and the 316 stainless steel tube, the effects on the heat transfer performance of 316 stainless steel tube attached to carbon steel was evaluated. It is showed that overall heat transfer coefficient of 10/316 clad tubes is higher than that of stainless steel tube. The average heat transfer coefficient of 10/316 clad tubes is about 18.7%~34.4% higher than that of stainless steel tube. Experimental investigation indicates that, by brazing and cold drawing, the 10/316 clad tube was well combined and the thermal conductivity was better than that of stainless steel tube.

Research of the Stainless Steel-Concrete-Carbon Steel Circular Concrete-Filled Double Skin Steel Tubes under Axial Compression

2014 ◽  
Vol 1065-1069 ◽  
pp. 1349-1353
Author(s):  
Zhen Kai Duan ◽  
Rui Wang
Keyword(s):  
Stainless Steel ◽  
Carbon Steel ◽  
Fire Resistance ◽  
Steel Tube ◽  
Steel Pipe ◽  
Building Structures ◽  
Light Pressure ◽  
Structure Variation ◽  
Concrete Filled Steel Tube ◽  
The Impact

Concrete-Filled Steel Tube with high capacity, good ductility and toughness, convenient construction, good fire resistance and other advantages. Currently[1] . Concrete-Filled Steel Tube structure has been widely used in the basic components and the overall structure of behavioral research has made many achievements. There are many advantages of concrete pipe above, but it also has fatal flaws, Stainless steel steel that is the difference[2]. The stainless steel has a beautiful appearance, durability, corrosion resistance, low maintenance costs, good fire resistance and other advantages. New stainless steel pipe concrete structure has both ordinary steel concrete good mechanical properties and excellent durability of stainless steel, can be widely used in buildings and bridges of the marine environment as well as some of the high durability and aesthetic requirements important building structures. Based on the outer stainless steel hollow sandwich - the carbon steel pipe shaft of light pressure test concrete results of load and displacement of the structure, variation of load and strain, and the impact of the empty heart of these parameters.

Pyrolytic carbon filaments and associated catalytic particles formed in steel tubes

1984 ◽  
Vol 42 ◽  
pp. 662-663
Author(s):  
Y. L. Chen ◽  
J. R. Bradley
Keyword(s):  
Stainless Steel ◽  
Carbon Steel ◽  
Catalyst Particle ◽  
Pyrolytic Carbon ◽  
Plain Carbon Steel ◽  
304 Stainless Steel ◽  
Hydrocarbon Gases ◽  
Steel Tubes ◽  
Filamentous Carbon ◽  
Carbon Filaments

Considerable effort has been directed toward an improved understanding of the production of the strong and stiff ∼ 1-20 μm diameter pyrolytic carbon fibers of the type reported by Koyama and, more recently, by Tibbetts. These macroscopic fibers are produced when pyrolytic carbon filaments (∼ 0.1 μm or less in diameter) are thickened by deposition of carbon during thermal decomposition of hydrocarbon gases. Each such precursor filament normally lengthens in association with an attached catalyst particle. The subject of filamentous carbon formation and much of the work on characterization of the catalyst particles have been reviewed thoroughly by Baker and Harris. However, identification of the catalyst particles remains a problem of continuing interest. The purpose of this work was to characterize the microstructure of the pyrolytic carbon filaments and the catalyst particles formed inside stainless steel and plain carbon steel tubes. For the present study, natural gas (∼; 97 % methane) was passed through type 304 stainless steel and SAE 1020 plain carbon steel tubes at 1240°K.

Estimation of Some Mechanical Properties for Similar & Dissimilar Welded Joints

2014 ◽  
Vol 2 (1) ◽  
pp. 59-76
Author(s):  
Abdullah Daie'e Assi
Keyword(s):  
Stainless Steel ◽  
Carbon Steel ◽  
Austenitic Stainless Steel ◽  
Base Metal ◽  
Welded Joints ◽  
Plate Thickness ◽  
Low Carbon Steel ◽  
Dissimilar Metals ◽  
Low Carbon ◽  
Steel Type

This research deals with the choice of the suitable filler metal to weld the similar and dissimilar metals (Low carbon steel type A516 & Austenitic stainless steel type 316L) under constant conditions such as, plate thickness (6 mm), voltage (78 v), current (120 A), straight polarity. This research deals with three major parts. The first parts Four types of electrodes were used for welding of dissimilar metals (C.St A516 And St.St 316L) two from mild steel (E7018, E6013) and other two from austenitic stainless steel (E309L, E308L) various inspection were carried out include (Visual T., X-ray T., δ- Ferrite phase T., and Microstructures T.) and mechanical testing include (tensile T., bending T. and micro hardness T.) The second parts done by used the same parameters to welding similar metals from (C.St A516) Or (St.St 316L). The third parts deals with welding of dissimilar weldments (C.St And St.St) by two processes, gas tungsten are welding (GTAW) and shielded metal are welding (SMAW).        The results indicated that the spread of carbon from low carbon steel to the welding zone in the case of welding stainless steel elect pole (E309L) led to Configuration Carbides and then high hardness the link to high values ​​compared with the base metal. In most similar weldments showed hardness of the welding area is  higher than the hardness of the base metal. The electrode (E309L) is the most suitable to welding dissimilar metals from (C.St A516 With St.St 316L). The results also showed that the method of welding (GTAW) were better than the method of welding (SMAW) in dissimilar welded joints (St.St 316L with C.St A516) in terms of irregular shape and integrity of the welding defects, as well as characterized this weldments the high-lift and resistance ductility good when using the welding conditions are similar.

Sign in / Sign up

Export Citation Format

Share Document