scholarly journals Non-nuclear qualification testing of improved design of physical sciences pressure transducers

1975 ◽  
Author(s):  
M.V. Simoncini
Keyword(s):  
Physical Sciences ◽  
Pressure Transducers ◽  
Qualification Testing ◽  
Improved Design

An improved design for an Scanning Tunnelling Microscope (STM) for use in a Transmission Electron Microscope (TEM)

1991 ◽  
Vol 49 ◽  
pp. 384-385
Author(s):  
W.K. Lo ◽  
J.C.H. Spence
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Mechanical Stability ◽  
Scanning Tunnelling Microscope ◽  
Reflection Mode ◽  
Specimen Holder ◽  
Transmission Electron ◽  
Scanning Tunnelling ◽  
Improved Design

An improved design for a combination Scanning Tunnelling Microscope/TEM specimen holder is presented. It is based on earlier versions which have been used to test the usefulness of such a device. As with the earlier versions, this holder is meant to replace the standard double-tilt specimen holder of an unmodified Philips 400T TEM. It allows the sample to be imaged simultaneously by both the STM and the TEM when the TEM is operated in the reflection mode (see figure 1).The resolution of a STM is determined by its tip radii as well as its stability. This places strict limitations on the mechanical stability of the tip with respect to the sample. In this STM the piezoelectric tube scanner is rigidly mounted inside the endcap of the STM holder. The tip coarse approach to the sample (z-direction) is provided by an Inchworm which is located outside the TEM vacuum.

Advances in ultramicrotomy for physical sciences applications

1993 ◽  
Vol 51 ◽  
pp. 710-711
Author(s):  
G. McMahon ◽  
T. Malis
Keyword(s):  
Particle Surface ◽  
Zeolite Catalysts ◽  
Physical Sciences ◽  
Pull Out ◽  
Large Particles ◽  
Novel Applications ◽  
Metal Wires ◽  
Frequent Problem ◽  
Specific Orientation ◽  
Diamond Knife

As with all techniques which are relatively new and therefore underutilized, diamond knife sectioning in the physical sciences continues to see both developments of the technique and novel applications.Technique Developments Development of specific orientation/embedding procedures for small pieces of awkward shape is exemplified by the work of Bradley et al on large, rather fragile particles of nuclear waste glass. At the same time, the frequent problem of pullout with large particles can be reduced by roughening of the particle surface, and a proven methodology using a commercial coupling agent developed for glasses has been utilized with good results on large zeolite catalysts. The same principle (using acid etches) should work for ceramic fibres or metal wires which may only partially pull out but result in unacceptably thick sections. Researchers from the life sciences continue to develop aspects of embedding media which may be applicable to certain cases in the physical sciences.

Sign in / Sign up

Export Citation Format

Share Document