scholarly journals Test series C 1: experimental determination of the pressure loss coefficient for the impedance ring in the inner reflector-outer reflector annulus

1963 ◽  
Author(s):  
V.R. Amatangelo
Keyword(s):  
Experimental Determination ◽  
Pressure Loss ◽  
Loss Coefficient ◽  
Test Series ◽  
Pressure Loss Coefficient

scholarly journals Determination of the Local Pressure Loss Coefficient Experimentally and Using CFD Methods

2020 ◽  
Vol 328 ◽  
pp. 02019
Author(s):  
Šimon Kubas ◽  
Andrej Kapjor ◽  
Martin Vantúch ◽  
Marián Pafčuga
Keyword(s):  
Pressure Loss ◽  
Air Conditioning ◽  
Loss Coefficient ◽  
Cfd Model ◽  
Acoustic Attenuation ◽  
Local Pressure ◽  
High Noise ◽  
Pressure Losses ◽  
Pressure Loss Coefficient

When choosing silencers in air conditioning, it is necessary to pay attention not only to the acoustic attenuation, but also to the pressure loss of the silencer. If the pressure loss of the damper is too high, noise will occur directly in the damper. The pressure losses of the silencers are determined mainly experimentally. Based on the performed measurement, a CFD model of the selected silencer was constructed, where the influence of various parameters on the value of the pressure loss of the selected silencer was investigated.

Determination of pressure loss coefficient of the hot duct break of the CEA ALLEGRO 2009 concept using a CFD technique

2019 ◽  
Vol 350 ◽  
pp. 234-242
Author(s):  
István Farkas ◽  
Tatiana Farkas ◽  
Attila Gábor Nagy ◽  
Gusztáv Mayer
Keyword(s):  
Pressure Loss ◽  
Loss Coefficient ◽  
Pressure Loss Coefficient

Vibration suppression investigation and parametric design of tri-axle straight heavy truck with pitch-resistant hydraulically interconnected suspension

2021 ◽  
pp. 107754632110396
Author(s):  
Fei Ding ◽  
Jie Liu ◽  
Chao Jiang ◽  
Haiping Du ◽  
Jiaxi Zhou ◽  
...  
Keyword(s):  
Surface Area ◽  
Dynamic Load ◽  
Pressure Loss ◽  
Vibration Suppression ◽  
Parametric Design ◽  
Suspension System ◽  
Loss Coefficient ◽  
The Body ◽  
Impedance Matrix ◽  
Pressure Loss Coefficient

The vibration suppression of the proposed pitch-resistant hydraulically interconnected suspension system for the tri-axle straight truck is investigated, and the vibration isolation performances are parametrically designed to achieve smaller body vibration and tire dynamic load using increased pitch stiffness and optimized pressure loss coefficient. For the hydraulic subsystem, the transfer impedance matrix method is applied to derive the impedance matrix. These hydraulic forces are incorporated into the motion equations of mechanical subsystem as external forces according to relationships between boundary flow and mechanical state vectors. In terms of the additional mode stiffness/damping and suspension performance requirements, the cylinder surface area, accumulator pressure, and damper valve’s pressure loss coefficient are comprehensively tuned with parametric design technique and modal analysis method. It is found the isolation capacity is heavily dependent on installation scheme and fluid physical parameters. Especially, the surface area can be designed for the oppositional installation to separately raise pitch stiffness without increasing bounce stiffness. The pressure loss coefficients are tuned with design of experiment approach and evaluated using all conflict indexes with normalized dimensionless evaluation factors. The obtained numerical results indicate that the proposed pitch-resistant hydraulically interconnected suspension system can significantly inhibit both the body and tire vibrations with decreased suspension deformation, and the tire dynamic load distribution among wheel stations is also improved.

The Characteristics Study of Helium-Xenon Mixture in Closed Brayton Cycle for Space Nuclear Reactor Power

2018 ◽  
Author(s):  
Xie Yang ◽  
Lei Shi
Keyword(s):  
Physical Properties ◽  
Pressure Loss ◽  
Nuclear Reactor ◽  
Reactor Power ◽  
Loss Coefficient ◽  
Working Fluid ◽  
System Efficiency ◽  
Pressure Loss Coefficient ◽  
Molar Weight ◽  
Xenon Mixture

Differing from the adoption of helium as working fluid of closed Brayton cycle (CBC) for terrestrial high temperature gas cooled reactor (HTGR) power plants, helium-xenon mixture with a proper molar weight was recommended as working fluid for space nuclear reactor power with CBC conversion. It is essential to figure out how the component of helium-xenon mixture affects the net system efficiency, in order to provide reference for the selection of appropriate cycle working fluid. After a discussion of the physical properties of different helium-xenon mixtures, the related physical properties are studied to analyze their affection on the key parameters of CBC, including adiabatic coefficient, recuperator effectiveness and normalized pressure loss coefficient. Then the comprehensive thermodynamics of CBC net system efficiency is studied in detail considering different helium-xenon mixtures. The physical properties study reveals that at 0.7 MPa and 400 K, the adiabatic coefficient of helium-xenon mixture increases with increased molar weight, from 0.400 (pure helium) to 0.414 (pure xenon), while recuperator effectiveness firstly increases and then decreases with the increase of molar weight, and the normalized pressure loss coefficient increases monotonically with molar weight increases. The thermodynamic analysis results show that the adiabatic coefficient has less effect on the net system efficiency, while the net system efficiency increases with increased recuperator effectiveness, and the net system efficiency decreases with normalized pressure loss coefficient increases. Finally, the mixture of helium-8.6% xenon was adopted as working fluid, instead of pure helium, for ensuring less turbine mechanicals (turbine and compressor) stages, and resulting maximum recuperator effectiveness. At the given cold / hot side temperature of 400 / 1300 K, the net system efficiency can reach 29.18% theoretically.

Rotating Annulus Component Performance Characterisation Based on CFD Analyses

2018 ◽  
Author(s):  
Youming Yuan ◽  
David Hunt
Keyword(s):  
Test Data ◽  
Pressure Loss ◽  
Model Performance ◽  
Internal Flow ◽  
Loss Coefficient ◽  
Performance Data ◽  
Pressure Loss Coefficient ◽  
1D Model ◽  
Torque Coefficient ◽  
Secondary Air

FloMASTER is a 1-D thermo-fluids system simulation tool and its component models depend on the characterisation data of the component performance. Such performance data is mainly based on data banks established from extensive tests exemplified by the books like “Internal Flow” by Miller [1] and “Handbook of Hydraulic Resistance” by Idelchik [2]. One of the key components of the gas turbine secondary air system is the rotating annulus. However, reliable data and correlations for performance characteristics like pressure loss coefficient, torque coefficient, windage and heat transfer for this component are rare and non-existent in the open literature for the case of both walls rotating simultaneously, which is becoming more common in today’s multi-spool military aero engines. To overcome this challenge of lack of reliable performance data and correlations, in this paper the Mentor Graphics 3D CFD tool “FloEFD” is used to model both inner wall rotating and outer wall rotating annulus flow, and to verify the 3D CFD results of performance data in terms of pressure loss coefficient and torque coefficient versus some published test data in the open literature. It is shown that the CFD gives results on pressure loss and torque coefficients that are in good agreement with test data based correlations used in FloMASTER. This demonstrates that 3D CFD can be used as a powerful tool for verifying the existing 1D model, extending the 1D model performance data range and generating new performance data for developing new components where such data is not available from open literature. A future project is to extend this approach to provide performance data for rotating annuli with both walls rotating. Such data will form the basis for developing a new component model for a rotating annulus with both walls rotating.

Sign in / Sign up

Export Citation Format

Share Document