scholarly journals Determination of excess reactivity and control worth for the core test reactor

1970 ◽  
Author(s):  
H. Rood ◽  
R. Roberts
Keyword(s):  
The Core ◽  
Test Reactor ◽  
And Control

Ultrastructural changes in sciatic nerve tissue: Effects of passive maternal smoking

1983 ◽  
Vol 41 ◽  
pp. 650-651
Author(s):  
Amankwah K.S. ◽  
A.D. Weberg ◽  
R.C. Kaufmann
Keyword(s):  
Sciatic Nerve ◽  
Maternal Smoking ◽  
Ultrastructural Level ◽  
Uranyl Acetate ◽  
Nerve Tissue ◽  
Ultrastructural Changes ◽  
Cacodylate Buffer ◽  
And Control ◽  
Spontaneous Delivery

Previous research has revealed that passive (involuntary inhalation) tobacco smoking during gestation can have adverse effects upon the developing fetus. These prior investigations did not concentrate on changes in fetal morphology. This study was undertaken to delineate fetal neural abnormalities at the ultrastructural level in mice pups exposed in utero to passive maternal smoking.Pregnant study animals, housed in a special chamber, were subjected to cigarette smoke daily from conception until delivery. Blood tests for determination of carbon monoxide levels were run at 15-18 days gestation. Sciatic nerve tissue from experimental and control animals were obtained following spontaneous delivery and fixed in 2.5% gluteraldehyde in 0.1M cacodylate buffer pH 7.3. The samples were post-fixed in osmium ferrocyanide (1:1 mixture of 1.5% aqueous OSO4 and 2.5% K4 Fe(CN)6). Following dehydration, the tissues were infiltrated with and embedded in Spurr. Sections were stained with uranyl acetate and lead citrate.

Imaging of ribosomal RNA-protein interactions by dark-field STEM

1989 ◽  
Vol 47 ◽  
pp. 250-251
Author(s):  
M. Boublik ◽  
V. Mandiyan ◽  
S. Tumminia ◽  
J.F. Hainfeld ◽  
J.S. Wall
Keyword(s):  
Nucleic Acid ◽  
16S Rrna ◽  
Dark Field ◽  
Radius Of Gyration ◽  
Central Domain ◽  
The Core ◽  
16S Rna ◽  
30S Subunit ◽  
Core Particles

Success in protein-free deposition of native nucleic acid molecules from solutions of selected ionic conditions prompted attempts for high resolution imaging of nucleic acid interactions with proteins, not attainable by conventional EM. Since the nucleic acid molecules can be visualized in the dark-field STEM mode without contrasting by heavy atoms, the established linearity between scattering cross-section and molecular weight can be applied to the determination of their molecular mass (M) linear density (M/L), mass distribution and radius of gyration (RG). Determination of these parameters promotes electron microscopic imaging of biological macromolecules by STEM to a quantitative analytical level. This technique is applied to study the mechanism of 16S rRNA folding during the assembly process of the 30S ribosomal subunit of E. coli. The sequential addition of protein S4 which binds to the 5'end of the 16S rRNA and S8 and S15 which bind to the central domain of the molecule leads to a corresponding increase of mass and increased coiling of the 16S rRNA in the core particles. This increased compactness is evident from the decrease in RG values from 114Å to 91Å (in “ribosomal” buffer consisting of 10 mM Hepes pH 7.6, 60 mM KCl, 2 m Mg(OAc)2, 1 mM DTT). The binding of S20, S17 and S7 which interact with the 5'domain, the central domain and the 3'domain, respectively, continues the trend of mass increase. However, the RG values of the core particles exhibit a reverse trend, an increase to 108Å. In addition, the binding of S7 leads to the formation of a globular mass cluster with a diameter of about 115Å and a mass of ∽300 kDa. The rest of the mass, about 330 kDa, remains loosely coiled giving the particle a “medusa-like” appearance. These results provide direct evidence that 16S RNA undergoes significant structural reorganization during the 30S subunit assembly and show that its interactions with the six primary binding proteins are not sufficient for 16S rRNA coiling into particles resembling the native 30S subunit, contrary to what has been reported in the literature.

Application of EDS Technique for OSP Film Thickness Measurement

2006 ◽  
Author(s):  
Prong Kongsubto ◽  
Sirarat Kongwudthiti
Keyword(s):  
Thin Film ◽  
Quantitative Analysis ◽  
Joint Strength ◽  
Critical Factor ◽  
Thickness Measurement ◽  
Ic Manufacturing ◽  
And Control ◽  
Film Thickness Measurement ◽  
Non Destructive

Abstract Organic solderability preservatives (OSPs) pad is one of the pad finishing technologies where Cu pad is coated with a thin film of an organic material to protect Cu from oxidation during storage and many processes in IC manufacturing. Thickness of OSP film is a critical factor that we have to consider and control in order to achieve desirable joint strength. Until now, no non-destructive technique has been proposed to measure OSP thickness on substrate. This paper reports about the development of EDS technique for estimating OSP thickness, starting with determination of the EDS parameter followed by establishing the correlation between C/Cu ratio and OSP thickness and, finally, evaluating the accuracy of the EDS technique for OSP thickness measurement. EDS quantitative analysis was proved that it can be utilized for OSP thickness estimation.

Nauwkeurige methode voor de aanwasbepaling van het grondvlak met behulp van de Pressler-boor

1968 ◽  
Vol 12 ◽  
Author(s):  
R. Goossens
Keyword(s):  
Basal Area ◽  
Precise Determination ◽  
Maximum Diameter ◽  
Precise Method ◽  
Maximum Radius ◽  
The Core ◽  
Two Parameters

A precise method for the determination of the increment of the  basal area using the PressIer bore. Refering to  previous research showing that the basal area of the corsica pine could be  characterized by an ellips, we present in this paper a precise method for the  determination of the increment of the basal area. In this method we determine  the direction of the maximum diameter, we measure this diameter and we take a  core in one of the points of tangency of the caliper with the measured tree.  The determination of the diameter perpendicular to the maximum diameter  finishes the work wich is to be done in the forest. From the classical  measurements effectuated on the core and from the measured diameters we can  then determine the form (V) and the excentricity (e). Substituting these two  parameters in the formula 2 or 2', we can also calculate the error of a  radius measured on the core with respect to the representative radius, This  error with them allow us to correct the measured value of the minimum or the  maximum radius and we will be able to do a precise determination of the  increment.

scholarly journals Biodegradation of Poly(Lactic Acid) Biocomposites under Controlled Composting Conditions and Freshwater Biotope

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 594
Author(s):  
Pavel Brdlík ◽  
Martin Borůvka ◽  
Luboš Běhálek ◽  
Petr Lenfeld
Keyword(s):  
Degradation Rate ◽  
Poly Lactic Acid ◽  
Screw Extruder ◽  
Flat Film ◽  
Twin Screw ◽  
Acetyl Tributyl Citrate ◽  
And Control ◽  
Aerobic Biodegradability ◽  
Qualitative Analyses

The influence of additives such as natural-based plasticiser acetyl tributyl citrate (ATBC), CaCO3 and lignin-coated cellulose nanocrystals (L-CNC) on the biodegradation of polylactic acid (PLA) biocomposites was studied by monitoring microbial metabolic activity through respirometry. Ternary biocomposites and control samples were processed by a twin-screw extruder equipped with a flat film die. Commonly available compost was used for the determination of the ultimate aerobic biodegradability of PLA biocomposites under controlled composting conditions (ISO 14855-1). In addition, the hydro-degradability of prepared films in a freshwater biotope was analysed. To determine the efficiency of hydro-degradation, qualitative analyses (SEM, DSC, TGA and FTIR) were conducted. The results showed obvious differences in the degradation rate of PLA biocomposites. The application of ATBC at 10 wt.% loading increased the biodegradation rate of PLA. The addition of 10 wt.% of CaCO3 into the plasticised PLA matrix ensured an even higher degradation rate at aerobic thermophilic composting conditions. In such samples (PLA/ATBC/CaCO3), 94% biodegradation in 60 days was observed. In contrast, neat PLA exposed to the same conditions achieved only 16% biodegradation. Slightly inhibited microorganism activity was also observed for ternary PLA biocomposites containing L-CNC (1 wt.% loading). The results of qualitative analyses of degradation in a freshwater biotope confirmed increased biodegradation potential of ternary biocomposites containing both CaCO3 and ATBC. Significant differences in the chemical and structural compositions of PLA biocomposites were found in the evaluated period of three months.

Formation of an Iron(III) Oxo Cubane Core Fe4(μ4-O)4 from FeCl3 and the Unsymmetrical Tripodal Ligand N[(CH2CH2NH2)(CH2CH2OH)(CH2CH2CH2OH)]

2004 ◽  
Vol 59 (8) ◽  
pp. 855-858 ◽  
Author(s):  
Ekkehardt Hahn ◽  
Christoph Jocher ◽  
Thomas Lügger
Keyword(s):  
Coordination Chemistry ◽  
Structure Determination ◽  
Disodium Salt ◽  
Ferrous Chloride ◽  
Tripodal Ligand ◽  
The Core ◽  
Yellow Precipitate

AbstractThe coordination chemistry of the unsymmetric, aliphatic, tetradentate tripodal ligand N[(CH2CH2NH2)(CH2CH2OH)(CH2CH2CH2OH)] H4-1 with iron chlorides was investigated. The disodium salt of the deprotonated ligand Na2(H2-1) reacts with FeCl3 to yield a yellow precipitate which upon recrystallization from DMSO/CH2Cl2 gives red crystals of the octanuclear iron(III) complex [{FeIIICl(H2-1)}4FeIII4(μ4-O)4Cl4] 2 ・ 4CH2Cl2 containing a central Fe4(μ4-O)4 cubane core. Crystals of 2 ・4DMF were obtained by slow oxidation of the green iron(II) complex obtained from ferrous chloride and Na2(H2-1) after recrystallization from DMF. The structure determination of 2 ・4CH2Cl2 also revealed the presence of the iron(III) oxo cubane core. The core is surrounded by four iron atoms each coordinated by η4-(H2-1)2- and Cl- ligands.

Quantitative Changes of the Lipid and Fatty Acid Composition of Leaves of Aleurites montana as a Consequence of Growth under 700 ppm CO2 in the Atmosphere

1996 ◽  
Vol 51 (11-12) ◽  
pp. 833-840 ◽  
Author(s):  
P He ◽  
A Radunz ◽  
K. P Bader ◽  
G. H Schmid
Keyword(s):  
Fatty Acids ◽  
Thylakoid Membrane ◽  
Saturated Fatty Acids ◽  
Phospholipid Fraction ◽  
Phospholipid Content ◽  
The Core ◽  
Glycolipid Fraction ◽  
Carbonic Acids ◽  
And Control ◽  
Β Carotene

Abstract Leaf lipids of Aleurites plants that were cultivated for 5 months in air containing 700 ppm CO2, were compared to those of control plants cultivated at 350 ppm CO2. The content of ether soluble lipids referred to dry matter is the same in CO2-and control plants. The comparison of lipids analyzed as the pigments chlorophyll and carotenoids, phospholipids and glycolipids shows that the ratio of phospholipids and glycolipids is slightly shifted in favor of phospholipids in CO2-plants. Thus, within the group of phospholipids, phosphatidylglycerol and phosphatidylinositol occur in higher concentrations in CO2-plants. Although the differences in the lipid content appear moderate in CO2-and control plants, it is the saturation degree of fatty acids that differs substantially. The fatty acids of CO2-plants contain according to the higher phospholipid content approx. 5% more saturated fatty acids. Stearic acid is three-fold increased. Whereas in the phospholipid fraction saturated fatty acids comprise one half of all fatty acids, the unsaturated fatty acids make up for 80 to 90% in the glycolipid fraction. In CO2-plants not only in the phospholipid fraction but also in the glycolipid fraction saturated fatty acids occur in a higher portion. This means that not only in the cell membrane of CO2-plants but also in the thylakoid membrane the fluidity is decreased. Also in the wax-fraction long-chained carbonic acids with 20 -26 carbon atoms occur. As the portion of these carbonic acids is twice as high in CO2-plants, it is concluded that a stronger formation of the wax layers exists in CO2-plants. By means of Western blotting and by the use of lipid and carotenoid antisera the binding of lipids onto proteins of photosystem II and photosystem I was analyzed. It is seen that besides the major amount of lipids which build up the thylakoid membrane, some lipids are also bound to membrane peptides. Whereas monogalactolipid is bound to the LHCP-complex peptides, to the OEC1 -peptide and the 43 and 47 kDa chlorophyll binding peptides, the anionic lipids sulfoquinovosyldiglyceride and phosphatidylglycerol and digalactolipid are bound to the core peptides of PS II and PS I. β-carotene and the xanthophylls were found to be bound to the core peptides and β-carotene and violaxanthin were also bound to the light-harvesting pigment complex.

Investigation of Impact Profile and Isolation Effect in Automated Impact Device Design and Control for Operational Modal Analysis

2015 ◽  
Vol 137 (9) ◽  
Author(s):  
Z. C. Ong ◽  
C. C. Lee
Keyword(s):  
Modal Analysis ◽  
Isolation Effect ◽  
Time Averaging ◽  
Impact Device ◽  
Lack Of Information ◽  
Analysis Technique ◽  
And Control ◽  
Phase Angles ◽  
Synchronous Time

A novel modal analysis technique called impact-synchronous modal analysis (ISMA) was introduced in previous research. With the utilization of impact-synchronous time averaging (ISTA), this modal analysis can be performed in presence of ambient forces whereas the conventional analysis method requires machines to be totally shut down. However, lack of information of phase angles with respect to impact in ISMA has caused it to be labor-intensive and time-consuming. An automated impact device (AID) is introduced in this study in the effort to replace the manually operated impact hammer and prepare it to be used in the current practice of ISMA on the purpose of enhancing its effectiveness and practicability. Impact profile and isolation effect are noted to be the contributing parameters in this study. This paper devoted on calibrating and controlling of the AID which gives the desired impact profiles as compared to the manual impact hammer. The AID is found effective in the determination of dynamic characteristics when the device is isolated from the boundary condition of the test structure.

Characterization and Control of Copper CMP with Optoacoustic Metrology

2001 ◽  
Vol 671 ◽  
Author(s):  
Michael Gostein ◽  
Paul Lefevre ◽  
Alex A. Maznev ◽  
Michael Joffe
Keyword(s):  
Film Thickness ◽  
Spatial Resolution ◽  
Chemical Mechanical Polishing ◽  
High Spatial Resolution ◽  
Mechanical Polishing ◽  
Length Measurement ◽  
And Control ◽  
Non Destructive

ABSTRACTWe discuss applications of optoacoustic film thickness metrology for characterization of copper chemical-mechanical polishing (CMP). We highlight areas where the use of optoacoustics for CMP characterization provides data complementary to that obtained by other techniques because of its ability to directly measure film thickness with high spatial resolution in a rapid, non-destructive manner. Examples considered include determination of planarization length, measurement of film thickness at intermediate stages of polish, and measurement of arrays of metal lines.

Sign in / Sign up

Export Citation Format

Share Document