scholarly journals CSISAR--Complete System Integrated SAR.

2021 ◽  
Author(s):  
Laura Sowko ◽  
Ireena Erteza
Keyword(s):  
Complete System

Denitrification in a Carbon and Nitrogen Removal System for Leachate Treatment: Performance of a Upflow Sludge Blanket (USB) Reactor

1999 ◽  
Vol 40 (8) ◽  
pp. 145-151 ◽  
Author(s):  
Liliana Borzacconi ◽  
Gisela Ottonello ◽  
Elena Castelló ◽  
Heber Pelaez ◽  
Augusto Gazzola ◽  
...  
Keyword(s):  
Complete System ◽  
Carbon Sources ◽  
Uasb Reactor ◽  
Leachate Treatment ◽  
N Removal ◽  
Start Up ◽  
Aerobic Reactor ◽  
C And N ◽  
Reactor Operating ◽  
Removal System

The performance of a bench scale upflow sludge bed (USB) denitrifying reactor was evaluated in order to integrate it into a C and N removal system for Sanitary Landfill Leachate. The raw leachate used presented COD and NH4-N average values of 30000 mg/l and 1000 mg/l, respectively. The complete system comprises in addition an UASB reactor and a nitrifying RBC. A portion of the aerobic reactor effluent was recycled into the denitrification stage and some raw leachate was also added as an additional C source. In order to obtain operating parameters the denitrifying reactor was operated alone. Sludge from an aerobic reactor (RBC) treating raw leachate was used as inoculum. Shortly after the start up, good granulation of the sludge bed was observed. Using raw leachate and UASB outlet as carbon sources with COD/NO3-N ratios of 4 and 12, respectively, denitrification efficiencies of about 90% were reached. A sludge yield of 0.16 gVSS/gCODremoved was obtained operating with raw leachate. For the anoxic reactor operating in the complete system, denitrification efficiencies of 90% were also achieved. A nitrogen gas recycle was a successful way to avoid frequently observed sludge bed rising problems.

scholarly journals Interactions of C-reactive protein with the complement system. III. Complement-dependent passive hemolysis initiated by CRP.

1975 ◽  
Vol 142 (5) ◽  
pp. 1065-1077 ◽  
Author(s):  
A.P. Osmand ◽  
R.F. Mortensen ◽  
Joan Siegel ◽  
H. Gewurz
Keyword(s):  
Guinea Pig ◽  
Human Serum ◽  
Complete System ◽  
Gel Filtration ◽  
C Reactive Protein ◽  
Inflammatory Reactions ◽  
Reactive Protein ◽  
Rabbit Igg ◽  
The Complement System ◽  
Pig Serum

Interactions of CRP with various substrates in the presence of human serum have been shown to result in efficient activation of C components C1-C5. We now report the ability of CRP to initiate C-dependent hemolysis. For this purpose CRP was isolated by affinity chromatography using pneumococcal CPS and gel filtration; its purity was established by several criteria. Erythrocytes were coated with CPS (E-CPS) and passively sensitized with CRP. C-dependent lysis of these cells was observed upon the addition of suitably absorbed human serum, and the efficiency of hemolysis compared favorably with that initiated by rabbit IgG anti-CPS antibody. CRP also sensitized E-CPS for lysis by guinea pig C; partial lysis was seen when C4-deficient guinea pig serum was used, suggesting that CRP also shares with antibody the ability of CRP to fully activate the C system and provide further evidence for a role for CRP similar to that of antibody in the initiation and modulation of inflammatory reactions via the complete system.

High Energy Focused Ion Beam Nanoprobes: Design and Applications

2005 ◽  
Vol 908 ◽  
Author(s):  
Gary A. Glass ◽  
Bibhudutta Rout ◽  
Alexander D. Dymnikov ◽  
Elia V. Eschenazi ◽  
Richard Greco ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Complete System ◽  
Ion Beam ◽  
Heavy Ion ◽  
High Energy ◽  
System Technology ◽  
Independent Research ◽  
Coordinated Development ◽  
Component Systems ◽  
Research Facilities

AbstractAn overview of the present state of high energy focused ion beam (HEFIB) system technology, nanoprobe system design and specific ion beam writing applications will be presented. In particular, the combination of P-beam, heavy-ion writing and ion implantation to produce microstructures in resists and silicon will be demonstrated.Heretofore, the development of HEFIB technology worldwide has progressed through a series of developments at independent research facilities, each having relatively narrow and mostly isolated, research purposes. However, a complete, versatile HEFIB nanoprobe system capable of both analysis and modification will require the combination of several component systems, each with specialized technology, and significant advances in the design of a complete system can only be expected from an effort that includes a coordinated development of the component parts.

Atomistic Simulations of Nanoindentation on Cu (111) with a Void

2008 ◽  
Vol 33-37 ◽  
pp. 919-924
Author(s):  
Chung Ming Tan ◽  
Yeau Ren Jeng ◽  
Yung Chuan Chiou
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Indentation Depth ◽  
Equilibrium Configuration ◽  
Complete System ◽  
Internal Surface ◽  
Atomistic Simulations ◽  
Element Formulation ◽  
Variable Parameters ◽  
Deformed State

This paper employs static atomistic simulations to investigate the effect of a void on the nanoindentation of Cu(111). The simulations minimize the potential energy of the complete system via finite element formulation to identify the equilibrium configuration of any deformed state. The size and depth of the void are treated as two variable parameters. The numerical results reveal that the void disappears when the indentation depth is sufficiently large. A stress concentration is observed at the internal surface of the void in all simulations cases. The results indicate that the presence of a void has a significant influence on the nanohardness extracted from the nanoindentation tests.

scholarly journals X. Observations upon the marine barometer, made during the examination of the coasts of New Holland and New South Wales, in the years 1801, 1802, and 1803

1806 ◽  
Vol 96 ◽  
pp. 239-266
Keyword(s):  
Complete System ◽  
New South ◽  
New South Wales ◽  
Common Stock ◽  
Reasonable Expectation ◽  
South Wales ◽  
The Common ◽  
Extended View

A fore-knowledge of the wind and weather is an object so very interesting to all classes of men, and the changes in the mercurial barometer affording the means which appear most conducive to it, a system that should with certainty explain the connection between the variations of the mercury and those in the atmosphere under all circumstances, becomes greatly desirable; to seamen, more especially, whose safety and success depend so much upon being duly prepared for changes of wind, and the approaching storm, it would be an acquisition of the first importance: in a more extended view, I may say, that the patriot and the philanthropist must join with the philosopher and the mariner in desiring its comple­tion. So long and widely-extended a course of observation, however, seems requisite to form even a basis for it, that a complete system is rather the object of anxious hope than of reasonable expectation. Much has been done towards it, but so much appears to remain, that any addition to the common stock, however small, or though devoid of philosophical accuracy, I have thought would be received by the learned with candour. With this prepossession, I venture to submit to them some observations upon the movement and state of the mercury upon the coasts of New Holland and New South Wales, the Terra Australis, or Australia, of the earlier charts.

Some Trends in the Development of Aircraft Electrical and Starting Systems

1955 ◽  
Vol 59 (537) ◽  
pp. 587-603
Author(s):  
R. H. Woodall
Keyword(s):  
Power System ◽  
Complete System ◽  
Main Task ◽  
Aircraft Industry ◽  
Electrical System ◽  
Set Up

The main task of the aircraft accessory designer is to provide fully developed and type-tested equipment to meet the needs of the Aircraft Industry at the time when a new aircraft is at a stage in construction where accessories are to be fitted.But he must do more than this, particularly with equipment for multi-engined aircraft. He must endeavour to set up and test a complete aircraft ancillary power system. This is particularly important for the electrical system, where two or more generators have to operate in parallel, successfully sharing the load on the system and providing over-voltage and other protection in such a manner that failure of the complete system does not result from failure of one engine, generator or its attendant equipment.

Sign in / Sign up

Export Citation Format

Share Document