scholarly journals University of Missouri Research Reactor LEU Fuel Element Flow Test Conceptual Design

2021 ◽  
Author(s):  
Cezary Bojanowski ◽  
Guanyi Wang ◽  
Ron Kmak ◽  
Andrew Hebden ◽  
Aaron Weiss ◽  
...  
Keyword(s):  
Fuel Element ◽  
Conceptual Design ◽  
Research Reactor ◽  
University Of Missouri ◽  
Flow Test

scholarly journals University of Missouri Research Reactor LEU Fuel Element Flow Test Conceptual Design – Hydraulic Reactor Design Parameters

2021 ◽  
Author(s):  
Guanyi Wang ◽  
Cezary Bojanowski ◽  
Andrew Hebden ◽  
Dhongik Yoon ◽  
Erik Wilson ◽  
...  
Keyword(s):  
Fuel Element ◽  
Conceptual Design ◽  
Research Reactor ◽  
Reactor Design ◽  
Design Parameters ◽  
University Of Missouri ◽  
Flow Test

scholarly journals Massachusetts Institute of Technology Reactor LEU Fuel Element Flow Test Conceptual Design

2021 ◽  
Author(s):  
Cezary Bojanowski ◽  
Guanyi Wang ◽  
Ron Kmak ◽  
Andrew Hebden ◽  
Aaron Weiss ◽  
...  
Keyword(s):  
Fuel Element ◽  
Conceptual Design ◽  
Massachusetts Institute ◽  
Massachusetts Institute Of Technology ◽  
Flow Test ◽  
Institute Of Technology

Conceptual Design Analysis of 4K Irradiation Facility in Korean Hanaro Research Reactor

1996 ◽  
pp. 65-72
Author(s):  
I. S. Hwang ◽  
G. W. Hong ◽  
W. S. Park ◽  
B. J. Jun ◽  
H. M. Chang
Keyword(s):  
Conceptual Design ◽  
Research Reactor ◽  
Design Analysis

scholarly journals THE THERMOHYDRAULIC ANALYSIS OF THE BANDUNG RESEARCH REACTOR CORE WITH PLATE TYPE FUEL ELEMENTS USING THE CFD CODE

2018 ◽  
Vol 20 (3) ◽  
pp. 123
Author(s):  
Reinaldy Nazar ◽  
Sudjatmi KA ◽  
Ketut Kamajaya
Keyword(s):  
Fuel Element ◽  
Surface Temperature ◽  
Forced Convection ◽  
Flow Rate ◽  
Research Reactor ◽  
Saturation Temperature ◽  
Cooling Flow ◽  
Fuel Elements ◽  
Type Fuel ◽  
Plate Type

Due to TRIGA fuel elements are no longer produced by General Atomic, it is necessary to find a solution so that the Bandung TRIGA 2000 reactor can still be operated. One solution is to replace the type of fuel elements. Study on using the MTR plate type fuel elements as used in RSG-GAS Serpong has been done for the Bandung TRIGA 2000. Based on the results of the study using CFD computer program, it is found that Bandung TRIGA 2000 with plate type fuel elements cannot be operated up to 2000 kW power by natural convection cooling mode. Therefore, the reactor must be cooled by forced convection. The analysis using forced convection showed that for cooling flow rate of 50 kg/s and various temperatures of 35oC, 35.5 oC and 36 oC, the surface temperature of the fuel element is between 110.37 oC and 111.27 oC. Meanwhile, the cooling water temperature in the corresponding position is between 61.03 oC and 61.95 oC. In this operation condition, the surface temperatures of fuel elements can approach the saturation temperature and nucleat boiling started to occur. Hence, the use of cooling flow rate entering core less than 50 kg/s should be avoided. The surface temperature of fuel elements decreased under saturation temperature if cooling flow rate is greater than 65 kg/s. The surface temperature of fuel elements is achieved at 96.65 oC and coolant temperature in the corresponding position was 54.38 oC. Keywords: Bandung research reactor, plate type fuel element, thermohydraulic, CFD code ANALISIS TERMOHIDROLIK TERAS REAKTOR RISET BANDUNG BERELEMEN BAKAR TIPE PELAT MENGGUNAKAN PROGRAM CFD. Mengingat tidak diproduksinya lagi elemen bakar TRIGA oleh General Atomic, maka perlu diusahakan suatu solusi agar reaktor TRIGA 2000 Bandung dapat tetap beroperasi. Salah satu solusi adalah dengan melakukan penggantian tipe elemen bakar. Pada studi ini telah dianalisis penggunaan elemen bakar tipe pelat yang sejenis dengan yang digunakan di RSG-GAS Serpong, untuk digunakankan pada teras reaktor TRIGA 2000 Bandung. Berdasarkan hasil penelitian yang telah dilakukan dengan menggunakan program komputer CFD, diketahui bahwa reaktor TRIGA berelemen bakar tipe pelat tidak dapat dioperasikan pada daya 2000 kW dengan menggunakan moda pendinginan konveksi alamiah seperti yang digunakan saat ini. Untuk kondisi ini, pendinginan dilakukan dengan moda pendinginan konveksi paksa. Hasil analisis konveksi paksa menunjukkan bahwa dengan menggunakan laju alir pendingin pompa 50 kg/s dan variasi temperatur pada 35 oC, 35,5 oC dan 36 oC, diperoleh temperatur permukaan pelat elemen bakar antara 110,37 oC – 111,27 oC dan temperatur pendinginnya pada posisi terkait antara 61,03 oC – 61,95 oC. Temperatur permukaan pelat elemen bakar ini mendekati temperatur saturasi dan tentunya telah mulai terjadi pendidihan inti, sehingga penggunaan laju alir pendingin masuk teras reaktor kurang dari 50 kg/s perlu dihindari. Temperatur permukaan pelat elemen bakar mulai menurun menjauhi temperatur saturasi jika digunakan laju alir pendingin lebih besar dari 65 kg/s, dengan temperatur permukaan pelat elemen bakar 96,65 oC dan temperatur pendinginnya pada posisi terkait 54,38 oC.Kata kunci: Reaktor riset Bandung, elemen bakar tipe pelat, termohidrolik, program CFD

scholarly journals OPTIMASI DESAIN TERMOHIDROLIKA TERAS DAN SISTEM PENDINGIN REAKTOR RISET INOVATIF DAYA TINGGI

2015 ◽  
Vol 17 (3) ◽  
pp. 127 ◽  
Author(s):  
Endiah Puji Hastuti ◽  
Muhammad Subekti ◽  
Sukmanto Dibyo ◽  
M. Darwis Isnaini
Keyword(s):  
Conceptual Design ◽  
High Power ◽  
Research Reactor ◽  
Cooling System ◽  
Flow Boiling ◽  
Reactor Core ◽  
System Optimization ◽  
Hydraulic Calculation ◽  
Design System ◽  
Steady State Condition

ABSTRAK OPTIMASI DESAIN TERMOHIDROLIKA TERAS DAN SISTEM PENDINGIN REAKTOR RISET INOVATIF DAYA TINGGI. Implementasi reaktor inovasi telah diterapkan pada berbagai reaktor riset baru yang saat ini sedang dibangun.  Pada saat ini BATAN sedang merancang desain konseptual reaktor riset daya tinggi yang telah masuk pada tahap optimasi desain. Spesifikasi desain konseptual reaktor riset inovatif adalah reaktor tipe kolam berpendingin air dan reflektor D2O. Teras reaktor memiliki kisi 5x5 dengan 16 bahan bakar dan 4 batang kendali. Teras reaktor berada di dalam tabung berisi D2O yang berfungsi sebagai posisi iradiasi. Daya reaktor 50 MW didesain untuk membangkitkan fluks neutron termal sebesar 5x1014 n/cm2s. Teras reaktor berbentuk kompak dan menggunakan bahan bakar U9Mo-Al dengan tingkat muat uranium 7-9 gU/cm3. Desain termohidrolika yang mencakup pemodelan, perhitungan dan analisis kecukupan pendingin dibuat sinergi dengan desain fisika teras agar keselamatan reaktor terjamin. Makalah ini bertujuan menyampaikan hasil analisis perhitungan termohidrolika teras dan sistem reaktor riset inovatif pada kondisi tunak. Analisis dilakukan menggunakan program perhitungan yang telah tervalidasi, masing-masing adalah Caudvap, PARET-ANL, Fluent dan ChemCad 6.4.1. Hasil perhitungan menunjukkan bahwa pembangkitan panas yang tinggi dapat dipindahkan tanpa menyebabkan pendidihan dengan menerapkan desain teras reaktor bertekanan, di samping itu desain awal komponen utama sistem pembuangan panas yang terintegrasi telah dilakukan, sehingga konseptual desain termohidrolika RRI-50 dapat diselesaikan. Kata kunci : reaktor riset inovatif, Caudvap, PARET-ANL, Fluent, ChemCad 6.4.1.  ABSTRACT THERMALHYDRAULIC DESIGN AND COOLING SYSTEM OPTIMIZATION OF THE HIGH POWER INOVATIVE RESEARCH REACTOR. Reactor innovation has been implemented in a variety of new research reactors that currently are being built. At this time BATAN is designing a conceptual design of the high power research reactor which has entered the stage of design optimization. The conceptual design specifications of the innovative research reactor is a pool type reactor, water-cooled and reflected by D2O. The reactor core has a 5 x 5 grid with 16 fuels and 4 control rods, which is inserted into a tube containing D2O as an irradiation position. Reactor power of 50 MW is designed to generate thermal neutron flux of 5x1014 n/cm2s. The compact core reactor is using U9Mo-Al fuel with uranium loading of 7-9 gU/cm3. Thermal hydraulic design includes modeling, calculation and analysis of the adequacy of coolant created synergy with the physical design of reactor safety. This paper aims to deliver the results of thermal hydraulic calculation and system design analysis at steady state condition. The analysis was done using various calculation programs that have been validated, i.e. Caudvap, PARET-ANL, Fluent and ChemCad 6.4.1. The calculation results show that the heat generation can be transfered without causing a two phase flow boiling by applying pressurized reactor core design, while the main components of initial design system with an integrated heat dissipation has been done, to complete the conceptual design of the RRI-50 thermalhydraulics. Keywords : inovative research reactor, Caudvap, PARET-ANL, Fluent, ChemCad 6.4.1.

Sign in / Sign up

Export Citation Format

Share Document