scholarly journals Performance Demonstration of Self-Powered Neutron Detectors for Steady-State Reactor Operations

2021 ◽  
Author(s):  
Kevin Tsai
Keyword(s):  
Steady State ◽  
Neutron Detectors ◽  
Self Powered ◽  
Performance Demonstration

scholarly journals THERMOCOAX rhodium SPND sensitivity dispersion and validation of the sensitivity calculation model

2020 ◽  
Vol 225 ◽  
pp. 04015
Author(s):  
L. Vermeeren ◽  
W. Leysen ◽  
L. Pichon ◽  
V. Salou ◽  
G. Helleux
Keyword(s):  
Gamma Rays ◽  
Neutron Capture ◽  
Characteristic Time ◽  
Thermal Neutron Flux ◽  
Calculation Model ◽  
Delayed Response ◽  
Neutron Detectors ◽  
Recorded Data ◽  
Self Powered ◽  
Beta Emission

This paper describes the neutron irradiation tests of 7 THERMOCOAX Self-Powered Neutron detectors (SPNDs) in the BR1 reactor at SCK•CEN. The SPNDs were fabricated according to the same specifications, but from different fabrication batches. The SPND signals were recorded during stepwise power-up of the reactor, proving the linearity of the SPND response within a wide thermal neutron flux range: from as low as 0.8·109 n/(cm2) to 2.6·1011 n/(cm2s). Intercomparison of the SPND signals shows a very small spread, confirming the repeatability of the THERMOCOAX fabrication processes. The overall neutron sensitivities of the seven SPNDs agreed within a 1% margin. The experimental data were analyzed in terms of prompt and various delayed responses. Prompt contributions to the signal are due to external gamma induced processes and to processes involving gamma rays emitted instantaneously upon neutron capture. The main contribution in a rhodium SPND is due to activation of the rhodium emitter and beta emission during decay of the activated rhodium and leads to a delayed response with a characteristic time of a few minutes. Activation and subsequent beta decay in other materials present in the SPND lead to additional minor delayed signal contributions. The partial SPND sensitivities due to all these processes were calculated using an MCNPX based model and were compared with experimental sensitivities based on the recorded data. The results were in fair agreement; for the overall SPND neutron sensitivity an agreement within a 1% margin was achieved.

scholarly journals Remote monitoring of Molten Core-Concrete Interaction experiment with Optical Fibre Sensors & perspectives to improve nuclear safety – DISCOMS project

2020 ◽  
Vol 225 ◽  
pp. 08004
Author(s):  
L. Maurin ◽  
P. Ferdinand ◽  
V. Bouyer ◽  
A. Denoix ◽  
G. Jouvin ◽  
...  
Keyword(s):  
Optical Fibre ◽  
Remote Monitoring ◽  
Electrical Power ◽  
Photon Counting ◽  
Severe Accident ◽  
Small Scale ◽  
Neutron Detectors ◽  
Optical Fibre Sensors ◽  
Self Powered ◽  
Scale Experiment

The DISCOMS project (Distributed Sensing for Corium Monitoring and Safety) aimed at providing innovative solutions not requiring local electrical power supplies, for remote monitoring of a severe nuclear accident. The solutions are based on both long length SPNDs (Self Powered Neutron Detectors) and on distributed OFSs (Optical Fibre Sensors) capable to detect the onset of a severe accident, the corium pouring on the containment building concrete basemat, and its interaction with the concrete floor under the reactor vessel, until it spreads in the core catcher (EPR case). This paper mainly focuses on these last three detection targets achievable with distributed OFSs. It is based on the results of a Molten Core & Concrete Interaction (MCCI) experiment, namely VULCANO, held in June 2018 with a concrete crucible equipped with overall ~ 180 m long optical fibre sensing cables. This small scale experiment (50 kg of prototypical corium) has demonstrated the ability of distributed OFSs to remotely provide useful data during the MCCI run: i) temperature profiles images up to about 580°C (single wavelength Raman DTS reflectometer) until cooling down to room temperature, ii) high spatial-resolution frequency shifts profiles, due to combined (non-selective) strain and temperature influences (Rayleigh OFDR and Brillouin reflectometers), and iii) cables lengths ablated by the corium on sections weakened by the temperature (Raman DTS, Rayleigh OFDR, telecom and photon counting reflectometers).

Sign in / Sign up

Export Citation Format

Share Document