scholarly journals ThermoLift – A Natural Gas Fired Air Conditioner and Heat Pump

2018 ◽  
Author(s):  
Paul Schwartz ◽  
Peter Hofbauer ◽  
Jonathan Haas ◽  
Diana Brehob
Keyword(s):  
Natural Gas ◽  
Heat Pump ◽  
Air Conditioner

A Techno-economic Analysis of Heat-Pump Entering Fluid Temperatures, and CO2 Emissions for Hybrid Ground Source Heat Pump Systems

2021 ◽  
Author(s):  
Hiep V. Nguyen ◽  
Ying Lam E. Law ◽  
Xiaoyan Zhou ◽  
Philip R. Walsh ◽  
Wey H. Leong ◽  
...  
Keyword(s):  
Natural Gas ◽  
Co2 Emissions ◽  
Heat Pump ◽  
Heat Pumps ◽  
Economic Effects ◽  
Fluid Temperature ◽  
Ground Source Heat Pump ◽  
Air Conditioner ◽  
Ground Source Heat Pumps ◽  
Ground Source

Hybrid ground-source heat pumps (GSHPs) that include a ground loop for the base heating and cooling needs, and an auxiliary system (natural gas boiler and electric air conditioner) for peak loads, are an economical and environmentally cleaner alternative to conventional systems. For a ground-source heat pump (GSHP) system, the choice of entering fluid temperature (EFT) to the heat pump plays a crucial role in determining system efficiency of and operating costs. To continue expanding the knowledge base of efficiently sizing GSHPs as a component of a hybrid system, this study explores the economic effects of choosing an EFT for a heat pump. In addition, system CO2 emissions are calculated and analyzed for a variety of building types. Using a computational approach to size hybrid GSHP systems recently published in [Alavy et al., Renewable Energy, 57 (2013) 404-412], the effects of optimizing EFT for a heat pump, and CO2 emissions were studied for a variety of commercial installations. In the present study, using ten buildings situated in Southern Ontario, Canada, by varying cooling and heating EFTs for a heat pump, savings ranging from 0.47% to 3.6% can be achieved compared to using a fixed EFT pairfor a heat pump. In addition, comparisons were made between the CO2 emissions of optimally sized (based on economic factors) hybrid GHSPs and those of non-hybridized GSHPs. Both the optimally-sized hybrid GHSPs, and the non-hybridized GSHPs significantly reduce CO2 emissions compared to the use of conventional natural gas/electrical systems. The additional environmental benefit of the non-hybridized GSHPs over that of the optimally-sized hybrid GSHPs was found to be negligible in most cases analyzed.

A Techno-economic Analysis of Heat-Pump Entering Fluid Temperatures, and CO2 Emissions for Hybrid Ground Source Heat Pump Systems

2021 ◽  
Author(s):  
Hiep V. Nguyen ◽  
Ying Lam E. Law ◽  
Xiaoyan Zhou ◽  
Philip R. Walsh ◽  
Wey H. Leong ◽  
...  
Keyword(s):  
Natural Gas ◽  
Co2 Emissions ◽  
Heat Pump ◽  
Heat Pumps ◽  
Economic Effects ◽  
Fluid Temperature ◽  
Ground Source Heat Pump ◽  
Air Conditioner ◽  
Ground Source Heat Pumps ◽  
Ground Source

Hybrid ground-source heat pumps (GSHPs) that include a ground loop for the base heating and cooling needs, and an auxiliary system (natural gas boiler and electric air conditioner) for peak loads, are an economical and environmentally cleaner alternative to conventional systems. For a ground-source heat pump (GSHP) system, the choice of entering fluid temperature (EFT) to the heat pump plays a crucial role in determining system efficiency of and operating costs. To continue expanding the knowledge base of efficiently sizing GSHPs as a component of a hybrid system, this study explores the economic effects of choosing an EFT for a heat pump. In addition, system CO2 emissions are calculated and analyzed for a variety of building types. Using a computational approach to size hybrid GSHP systems recently published in [Alavy et al., Renewable Energy, 57 (2013) 404-412], the effects of optimizing EFT for a heat pump, and CO2 emissions were studied for a variety of commercial installations. In the present study, using ten buildings situated in Southern Ontario, Canada, by varying cooling and heating EFTs for a heat pump, savings ranging from 0.47% to 3.6% can be achieved compared to using a fixed EFT pairfor a heat pump. In addition, comparisons were made between the CO2 emissions of optimally sized (based on economic factors) hybrid GHSPs and those of non-hybridized GSHPs. Both the optimally-sized hybrid GHSPs, and the non-hybridized GSHPs significantly reduce CO2 emissions compared to the use of conventional natural gas/electrical systems. The additional environmental benefit of the non-hybridized GSHPs over that of the optimally-sized hybrid GSHPs was found to be negligible in most cases analyzed.

scholarly journals A Techno-economic Analysis of Heat-Pump Entering Fluid Temperatures, and CO2 Emissions for Hybrid Ground Source Heat Pump Systems

2021 ◽  
Author(s):  
Hiep V. Nguyen ◽  
Ying Lam E. Law ◽  
Xiaoyan Zhou ◽  
Philip R. Walsh ◽  
Wey H. Leong ◽  
...  
Keyword(s):  
Natural Gas ◽  
Co2 Emissions ◽  
Heat Pump ◽  
Heat Pumps ◽  
Economic Effects ◽  
Fluid Temperature ◽  
Ground Source Heat Pump ◽  
Air Conditioner ◽  
Ground Source Heat Pumps ◽  
Ground Source

Hybrid ground-source heat pumps (GSHPs) that include a ground loop for the base heating and cooling needs, and an auxiliary system (natural gas boiler and electric air conditioner) for peak loads, are an economical and environmentally cleaner alternative to conventional systems. For a ground-source heat pump (GSHP) system, the choice of entering fluid temperature (EFT) to the heat pump plays a crucial role in determining system efficiency of and operating costs. To continue expanding the knowledge base of efficiently sizing GSHPs as a component of a hybrid system, this study explores the economic effects of choosing an EFT for a heat pump. In addition, system CO2 emissions are calculated and analyzed for a variety of building types. Using a computational approach to size hybrid GSHP systems recently published in [Alavy et al., Renewable Energy, 57 (2013) 404-412], the effects of optimizing EFT for a heat pump, and CO2 emissions were studied for a variety of commercial installations. In the present study, using ten buildings situated in Southern Ontario, Canada, by varying cooling and heating EFTs for a heat pump, savings ranging from 0.47% to 3.6% can be achieved compared to using a fixed EFT pairfor a heat pump. In addition, comparisons were made between the CO2 emissions of optimally sized (based on economic factors) hybrid GHSPs and those of non-hybridized GSHPs. Both the optimally-sized hybrid GHSPs, and the non-hybridized GSHPs significantly reduce CO2 emissions compared to the use of conventional natural gas/electrical systems. The additional environmental benefit of the non-hybridized GSHPs over that of the optimally-sized hybrid GSHPs was found to be negligible in most cases analyzed.

Experimental Investigation on Flow Characteristic of Stepped Capillary Tube for Heat Pump Type Air Conditioner with R410A

2014 ◽  
Vol 960-961 ◽  
pp. 643-647
Author(s):  
Yan Sheng Xu
Keyword(s):  
Mass Flow Rate ◽  
Heat Pump ◽  
Mass Flow ◽  
Flow Rate ◽  
Capillary Tube ◽  
Coefficient Of Performance ◽  
Tube Length ◽  
Air Conditioner ◽  
Capillary Tubes ◽  
Tube Assembly

A stepped capillary tube consisting of two serially connected capillary tubes with different diameters is invented to replace the conventional expansion device. The mass flow rate of refrigerant R410A in stepped capillary tubes with different size were tested. The model of stepped capillary tube is proposed, and its numerical algorithm for tube length and mass flow rate is developed. The experimental results show that the performance comparing between stepped capillary tube system and capillary tube assembly system, the cooling capacity is reduced by 0.3%, the energy efficiency ratio (EER) is equal to each other, the heating capacity is increased by 0.3%, the coefficient of performance (COP) is decreased by 0.3%. That is to say, the performance index of the two kinds of throttle mechanism is almost identical. It indicates that the stepped capillary tube can replace the capillary tube assembly in the R410A heat pump type air conditioner absolutely. The model is validated with experimental data, and the results show that the model can be used for sizing and rating stepped capillary tube.

Peak-Shaving Ratio Analysis of the Natural Gas Combined Heat and Power Plant With Distributed Peak-Shaving Heat Pumps

2017 ◽  
Author(s):  
Xiling Zhao ◽  
Xiaoyin Wang ◽  
Tao Sun
Keyword(s):  
Natural Gas ◽  
Heat Source ◽  
Heat Pump ◽  
Gas Turbines ◽  
Heat Load ◽  
Operating Cost ◽  
Heat Pumps ◽  
Optimized Design ◽  
Peak Shaving ◽  
Gas Price

Distributed peak-shaving heat pump technology is to use a heat pump to adjust the heat on the secondary network in a substation, with features of low initial investment, flexible adjustment, and high operating cost. The paper takes an example for the system that uses two 9F class gas turbines (back pressure steam) as the basic heat source and a distributed heat pump in the substation as the peak-shaving heat source. The peak-shaving ratio is defined as the ratio of the designed peak-shaving heat load and the designed total heat load. The economic annual cost is taken as a goal, and the optimal peak-shaving ratio of the system is investigated. The influence of natural gas price, electricity price, and transportation distance are also analyzed. It can provide the reference for the optimized design and operation of the system.

Sign in / Sign up

Export Citation Format

Share Document