scholarly journals Cermet high level waste forms

1978 ◽  
Author(s):  
W. S. Aaron ◽  
T. C. Quinby ◽  
E. H. Kobisk
Keyword(s):  
High Level Waste ◽  
Waste Forms ◽  
High Level

Performance of Borosilicate Glass High-Level Waste Forms in Disposal Systems

1986 ◽  
Vol 73 (2) ◽  
pp. 139-139
Author(s):  
Edward J. Hennelly ◽  
E. I. Du Pont de Nemours
Keyword(s):  
Borosilicate Glass ◽  
High Level Waste ◽  
Waste Forms ◽  
High Level

Dose-Dependence of Pb-Ion Implantation Damage in Zirconolite, Hollandite, and Zircon

1981 ◽  
Vol 11 ◽  
Author(s):  
T. J. Headley ◽  
G. W. Arnold ◽  
C. J. M. Northrup
Keyword(s):  
Radiation Damage ◽  
Structural Damage ◽  
Accelerated Aging ◽  
Dose Dependence ◽  
High Level Waste ◽  
Long Term Stability ◽  
Waste Forms ◽  
Recent Approach ◽  
High Level

The long-term stability of nuclear waste forms is an important consideration in their selection for safe disposal of radioactive waste. Stability against long-term radiation damage is particularly difficult to assess by short-term laboratory experiments. Much of the displacement damage in high-level waste forms will be generated by heavy recoil nuclei emitted during the α-decay process of long-lived actinide elements. Hence, an accelerated aging test which reliably simulates the α-recoil damage accumulated during thousands of years of storage is desirable. One recent approach to this simulation is to implant the waste form with heavy Pb-ions.I- 6 If the validity of this approach is to be fully assessed, two important questions which have not yet been investigated must be answered.(1) Is the structural damage, including cumulative effects, similar for irradiation by Pb-ions and a-recoil nuclei in a given material? (2) Is the dose-dependence of the accumulated damage similar? The purpose of this investigation was to assess the extent of these similarities in selected materials. We utilized transmission electron microscopy (TEM) to characterize the radiation damage and measure its dose-dependence.

Determination of the Corrosion Mechanisms of High-Level Waste Containing Glass

1981 ◽  
Vol 11 ◽  
Author(s):  
Horst Scholze ◽  
Reinhard Conradt ◽  
Heinrich Engelke ◽  
Hans Roggendorf
Keyword(s):  
Rock Salt ◽  
High Level Waste ◽  
Extreme Conditions ◽  
Safety Standard ◽  
Waste Forms ◽  
Corrosion Mechanisms ◽  
High Level

The German concept of high level waste final storage provides the use of certain glasses containing radioelement oxides as glass components. These waste forms are to be stored in rock salt formations in order to isolate the waste from the biosphere. The efficiency of this isolation is a most important question. The aim is to achieve a high safety standard that remains valid under extreme conditions such as the uncontrolled water entrance to the deposit.

scholarly journals Stability of High-Level Waste Forms

2004 ◽  
Author(s):  
Theodore M Besmann ◽  
John D Vienna
Keyword(s):  
High Level Waste ◽  
Waste Forms ◽  
High Level

Characterization of Mechanical Strengths for Simulated High-Level Waste Forms

1989 ◽  
Vol 176 ◽  
Author(s):  
Hiroshi Igarashi ◽  
Takeshi Takahashi
Keyword(s):  
Fracture Toughness ◽  
Glass Ceramic ◽  
Bending Strength ◽  
Liquid Waste ◽  
High Level Waste ◽  
Spent Fuel ◽  
High Level Liquid Waste ◽  
Waste Forms ◽  
High Level ◽  
Mechanical Strengths

ABSTRACTWaste forms have been developed and characterized at PNC (Power Reactor and Nuclear Fuel Development Corporation)to immobilize high-level liquid waste generated from the reprocessing of nuclear spent fuel.Mechanical strength tests were excecuted on simulated solidified highlevel waste forms which were borosilicate glass and diopside glass-ceramic. Commercial glass was tested for comparison. Measured strengths were three-point bending strength,uniaxial compressive strength,impact strength by falling weight method,and Vickers hardness. Fracture toughness and fracture surface energy were also measured by both notch-beam and indentation technique.The results show that mechanical strengths of waste glass form are similar and that the glass ceramic form has the higher fracture toughness.

Respirable Fines Produced by Impacts of Simulated Alternative High-Level Waste Materials

1981 ◽  
Vol 6 ◽  
Author(s):  
Leslie J. Jardine ◽  
Gerald T. Reedy ◽  
William J. Mecham
Keyword(s):  
Fragment Size ◽  
High Level Waste ◽  
Size Distributions ◽  
Savannah River ◽  
Waste Forms ◽  
Mass Fractions ◽  
High Silica ◽  
Weight Impact ◽  
High Level ◽  
Spinel Ceramic

ABSTRACTStandardized comparative drop weight impact tests were conducted on solid alternative waste forms under consideration for immobilizing Savannah River Laboratory (SRL) defense wastes. The fragment size distributions were measured in the size ranges of ֮5 to 8000 μm. All waste form fragment size distributions could be described accurately by lognormal plots. Respirable sizes (≤10 μm) were measured. Borosilicate glass and SYNROC specimens yielded the same mass fractions of respirable sizes; FUETAP concrete, high silica and alkoxide glass specimens yielded ֮2–3 times more mass fractions of particles of respirable sizes, whereas tailored (Spinel) ceramic specimens yielded the smallest mass fractions of respirable sizes, ֮2–1/2 times less.

The Strategy of the Belgian Nuclear Research Centre in the Area of High-Level Waste Form Compatibility Research

2007 ◽  
Author(s):  
Karel Lemmens ◽  
Christelle Cachoir ◽  
Elie Valcke ◽  
Karine Ferrand ◽  
Marc Aertsens ◽  
...  
Keyword(s):  
Nuclear Research ◽  
Waste Form ◽  
Research Centre ◽  
High Level Waste ◽  
Spent Fuel ◽  
National Agency ◽  
Waste Forms ◽  
In Situ Experiments ◽  
High Level

The Belgian Nuclear Research Centre (SCK•CEN) has a long-standing expertise in research concerning the compatibility of waste forms with the final disposal environment. For high level waste, most attention goes to two waste forms that are relevant for Belgium, namely (1) vitrified waste from the reprocessing of spent fuel, and (2) spent fuel as such, referring to the direct disposal scenario. The expertise lies especially in the study of the chemical interactions between the waste forms and the disposal environment. This is done by laboratory experiments, supported by modeling. The experiments vary from traditional leach tests, to more specific tests for the determination of particular parameters, and highly realistic experiments. This results in a description of the phenomena that are expected upon disposal of the waste forms, and in quantitative data that allow a conservative long-term prediction of the in situ life time of the waste form. The predictions are validated by in situ experiments in the underground research laboratory HADES. The final objective of these studies, is to estimate the contribution of the waste form to the overall safety of the disposal system, as part of the Safety and Feasibility Case, planned by the national agency ONDRAF/NIRAS. The recent change of the Belgian disposal concept from an engineered barrier system based on the use of bentonite clay to a system based on a concrete buffer has caused a reorientation of the research programme. The expertise in the area of clay-waste interaction will however be maintained, to develop experimental methodologies in collaboration with other countries, and as a potential support to the decision making in those countries where a clay based near field is still the reference. The paper explains the current R&D approach, and highlights some recent experimental set-ups available at SCK•CEN for this purpose, with some illustrating results.

Sign in / Sign up

Export Citation Format

Share Document