scholarly journals Candidate glass-ceramic waste forms for immobilization of the calcines stored at the Idaho Chemical Processing Plant

1995 ◽  
Author(s):  
K. Vinjamuri
1996 ◽  
Vol 465 ◽  
Author(s):  
T. P. O'Holleran ◽  
S. G. Johnson ◽  
S. M. Frank ◽  
M. K. Meyer ◽  
M. Noy ◽  
...  

ABSTRACTResults are reported on several new glass and glass-ceramic waste formulations for plutonium disposition. The approach proposed involves employing existing calcined high level waste (HLW) present at the Idaho Chemical Processing Plant (ICPP) as an additive to: 1) aid in the formation of a durable waste form and 2) decrease the attractiveness level of the plutonium from a proliferation viewpoint. The plutonium, PuO2, loadings employed were 15 wt% (glass) and 17 wt% (glass-ceramic). Results in the form of x-ray diffraction patterns, microstructure and durability tests are presented on cerium surrogate and plutonium loaded waste forms using simulated calcined HLW and demonstrate that durable phases, zirconia and zirconolite, contain essentially all the plutonium.


1995 ◽  
Vol 412 ◽  
Author(s):  
Darryl D. Siemer ◽  
Barry E. Scheetz ◽  
Mary Lou Gougar

AbstractProperly prepared cementitious waste forms can be hot-isostatically-pressed into materials that exhibit performance equivalent to typical radwaste-type glasses. The HIPing conditions (temperature/pressure) required to “vitrify” these concretes are quite mild and therefore consistent with both safety and good productivity. This paper describes both the process and its products with reference to potential application to Idaho Chemical Processing Plant (ICPP) reprocessing wastes.


1987 ◽  
Vol 112 ◽  
Author(s):  
Roseanne S. Baker ◽  
Bruce A. Staples ◽  
Dieter A. Knecht ◽  
Julius R. Berreth

AbstractCandidate products are being evaluated to immobilize the routinely calcined waste at the Idaho Chemical Processing Plant (ICPP). A potential product with minimal volume for immobilizing ICPP high-level waste (HLW) for final disposal is a high-waste-loading and high-density glass-ceramic. Glass-ceramics are formed by Hot Isostatic Pressing (HIPing) the HLW with selected additives, such as SiO2, B2O3, Li2O, Na2O, and Y2O3. Glass-ceramic products have been formed with calcine loa ings up to 80 wt% and densities up to 3.4 g/cm3. Crystalline phases observed in the glass-ceramic products include calcium fluoride, monoclinic and cubic zirconia, calcium- and yttrium-stabilized zirconia, and zircon. An interstitial amorphous phase also exists consisting of the oxides of silicon, aluminum, boron, and alkalis. The glass-ceramic waste forms give leach rates comparable to simulated HLW glass products.


2014 ◽  
Vol 444 (1-3) ◽  
pp. 481-492 ◽  
Author(s):  
Jarrod Crum ◽  
Vince Maio ◽  
John McCloy ◽  
Clark Scott ◽  
Brian Riley ◽  
...  

2010 ◽  
Author(s):  
Jarrod V. Crum ◽  
Laura A. Turo ◽  
Brian J. Riley ◽  
Ming Tang ◽  
Anna Kossoy ◽  
...  

MRS Advances ◽  
2019 ◽  
Vol 4 (17-18) ◽  
pp. 1029-1043 ◽  
Author(s):  
John S. McCloy ◽  
José Marcial ◽  
Deepak Patil ◽  
Muad Saleh ◽  
Mostafa Ahmadzadeh ◽  
...  

ABSTRACTNuclear wastes generated from reprocessing of used nuclear fuel tend to contain a large fraction of rare earth (RE, e.g., Nd3+), transition (TM, e.g., Mo6+, Zr4+), alkali (A, e.g., Cs+), and alkaline earth cations (AE, e.g., Ba2+, Sr2+). Various strategies have been considered for immobilizing such waste streams, varying from nominally crystal-free glass to glass-ceramic to multi-phase ceramic waste forms. For glass and glass-ceramic waste forms, the added glass-forming system is generally alkali-alkaline earth-aluminoborosilicate (i.e., Na-Ca-Al-B-Si oxide). In a US-UK collaborative project, summarized here, we investigated the glass structure and crystallization dependence on compositional changes in simulated nuclear waste glasses and glass-ceramics. Compositions ranged in complexity from five – to – eight oxides. Specifically, the roles of Mo and rare earths are investigated, since a proposed glass-ceramic waste form contains crystalline phases such as powellite [(AE,A,RE)MoO4] and oxyapatite [(RE,AE,A)10Si6O26], and the precipitation of molybdenum phases is known to be affected by the rare earth concentration in the glass. Additionally, the effects of other chemical additions have been systematically investigated, including Zr, Ru, P, and Ti. A series of studies were also undertaken to ascertain the effect of the RE size on glass structure and on partitioning to crystal phases, investigating similarities and differences in glasses containing single RE oxides of Sc, Y, La, Ce, Nd, Sm, Er, Yb, or Lu. Finally, the effect of charge compensation was investigated by considering not only the commonly assessed peralkaline glass but also metaluminous and peraluminous compositions. Glass structure and crystallization studies were conducted by spectroscopic methods (i.e., Raman, X-ray absorption, nuclear magnetic resonance (NMR), optical absorption, photoluminescence, photoluminescence excitation, X-ray photoelectron spectroscopy), microscopy (i.e., scanning electron microscopy, transmission electron microscopy, electron probe microanalysis), scattering (i.e., X-ray and neutron diffraction, small angle measurements), and physical characterization (i.e., differential thermal analysis, liquidus, viscosity, density). This paper will give an overview of the research program and some example unpublished results on glass-ceramic crystallization kinetics, microstructure, and Raman spectra, as well as some examples of the effects of rare earths on the absorption, luminescence, and NMR spectra of starting glasses. The formal collaboration described here has resulted in the generation of a large number of results, some of which are still in the process of being published as separate studies.


2020 ◽  
Vol 239 ◽  
pp. 122314 ◽  
Author(s):  
Fu Wang ◽  
Mingwei Lu ◽  
Qilong Liao ◽  
Yuanlin Wang ◽  
Hanzhen Zhu ◽  
...  

1983 ◽  
Vol 26 ◽  
Author(s):  
Alan B. Harker ◽  
John F. Flintoff

ABSTRACTPolyphase ceramic and glass-ceramic forms have been consolidated from simulated Idaho Chemical Processing Plant wastes by hot isostatic pressing calcined waste and chemical additives at 1000°C or less. The ceramic forms can contain over 70 wt% waste with densities ranging from 3.5 to 3.85 g/cm3, depending upon the formulation. Major phases are CaF2, CaZrTi2O7, CaTiO3, monoclinic ZrO2, and amorphous intergranular material. The relative fraction of the phases is a function of the chemical additives (TiO2, CaO, and Si02) and consolidation temperature. Zirconolite, the major actinide host, makes the ceramic forms extremely leach resistant for the actinide simulant U238. The amorphous phase controls the leach performance for Sr and Cs which is improved by the addition of SiO2. Glass-ceramic forms were also consolidated by HIP at waste loadings of 30 to 70 wt% with densities of 2.73 to 3.1 g/cm3 using Exxon 127 borosilicate glass frit. The glass-ceramic forms contain crystalline CaF2, Al2O3, and ZrSiO4 (zircon) in a glass matrix. Natural mineral zircon is a stable host for 4+ valent actinides.


Sign in / Sign up

Export Citation Format

Share Document