scholarly journals HIGH EFFICIENCY STRUCTURAL FLOWTHROUGH ROTOR WITH ACTIVE FLAP CONTROL: VOLUME ZERO: OVERVIEW AND COMMERCIAL PATH

2015 ◽  
Author(s):  
Michael D. Zuteck ◽  
Kevin L. Jackson ◽  
Richard A. Santos
Keyword(s):  
High Efficiency ◽  
Control Volume ◽  
Active Flap

scholarly journals HIGH EFFICIENCY STRUCTURAL FLOWTHROUGH ROTOR WITH ACTIVE FLAP CONTROL: VOLUME ONE: PRELIMINARY DESIGN REPORT

2015 ◽  
Author(s):  
Michael D. Zuteck ◽  
Kevin L. Jackson ◽  
Richard A. Santos ◽  
Ray Chow ◽  
Thomas R. Nordenholz ◽  
...  
Keyword(s):  
High Efficiency ◽  
Control Volume ◽  
Preliminary Design ◽  
Active Flap

scholarly journals HIGH EFFICIENCY STRUCTURAL FLOWTHROUGH ROTOR WITH ACTIVE FLAP CONTROL: VOLUME THREE: MARKET & TEAM

2015 ◽  
Author(s):  
Michael D. Zuteck ◽  
Kevin L. Jackson ◽  
Richard A. Santos
Keyword(s):  
High Efficiency ◽  
Control Volume ◽  
Active Flap

scholarly journals Efficiency analysis of hydrodynamic calculations on GPU and CPU clusters

2016 ◽  
pp. 329-338
Author(s):  
А.В. Сентябов ◽  
А.А. Гаврилов ◽  
М.А. Кривов ◽  
А.А. Дектерев ◽  
М.Н. Притула
Keyword(s):  
Performance Evaluation ◽  
High Efficiency ◽  
Control Volume ◽  
Flow Simulation ◽  
Efficiency Analysis ◽  
Control Volume Method ◽  
Hexahedral Meshes ◽  
Hydrodynamic Calculations ◽  
Volume Method ◽  
New Generation

Рассматривается ускорение параллельных гидродинамических расчетов на кластерах с CPU- и GPU-узлами. Для тестирования используется собственный CFD-код SigmaFlow, портированный для расчетов на графических ускорителях с помощью технологии CUDA. Алгоритм моделирования течения несжимаемой жидкости основан на SIMPLE-подобной процедуре и дискретизации с помощью метода контрольного объема на неструктурированных сетках из тексаэдральных ячеек. Сравнение скорости расчета показывает высокую производительность графических ускорителей нового поколения в GPGPU-расчетах. Speedup of parallel hydrodynamic calculations on clusters with CPUs and GPUs is considered. The CFD SigmaFlow code developed by the authors and ported for GPU by means of CUDA is used in test calculations. The incompressible flow simulation is based on a SIMPLE-like procedure and on a discretization by the control volume method on unstructured hexahedral meshes. The performance evaluation shows a high efficiency of the new generation of GPUs for GPGPU calculations.

scholarly journals BIOREMOVAL OF COPPER(II) VIA HYDROGEN FERMENTATION OF ECOLOGICALLY HAZARDOUS MULTICOMPONENT FOOD WASTE

2020 ◽  
pp. 5-14
Author(s):  
Olesia Havryliuk ◽  
Vira Hovorukha ◽  
Galina Gladka ◽  
Oleksandr Tashyrev
Keyword(s):  
Food Waste ◽  
High Efficiency ◽  
Control Volume ◽  
Lethal Effect ◽  
Culture Liquid ◽  
Final Phase ◽  
Natural Ecosystems ◽  
Potential Measurement ◽  
Gas Fermentation ◽  
Waste Destruction

The environmental pollution by copper and the increasing amount of environmentally hazardous organic waste destroy natural ecosystems and have negative and even lethal effect on living organisms. The chemical techniques of metal containing waste detoxification are expensive and hazardous being the advanced problem today. The aim was to justify theoretically and confirm experimentally the possibility of toxic Cu2+ removal by hydrogen producing microbiome (HPM) via dark hydrogen fermentation of solid multicomponent food waste (MFW). Colorimetric and potentiometric methods were used for pH and redox potential measurement. Volumetric and chromatographic methods were applied to control volume and composition of synthesized gas. Fermentation parameters were calculated with the use of mathematical and statistical ones. The high effectiveness of solid waste destruction and Cu2+ removal was shown by spore forming HPM. The MFW were fastly and effectively digested by the microbiome at the absence of Cu2+. The weight of MFW was 90 times decreased (Kd = 90). The maximum concentration of H2 was 35% and biohydrogen yield was 76 L/kg of MFW counting on absolutely dry weight (ADW). The fermentation process was inhibited by Cu2+ in the form of citrate complex. The biohydrogen yield and efficiency of waste destruction were decreased on 41% (45 L/kg of waste) and 37% (Kd = 57) consequently after addition of 50 ppm Cu2+ to the culture liquid of the bioreactor during the beginning of final phase (50 hours) of MFW fermentation. The effect of complete inhibition of H2 synthesis was obtained in the case of adding 100 ppm Cu2+ to the culture liquid sampled from bioreactor during the final phase (80 hours) of fermentation. Nonetheless, the Cu2+ was bioremoved by HPM with high efficiency up to 99.0 % and 99.5% after 5 hours and 30 hours of fermentation where initially the concentrations of Cu2+ were consequently 50 and 100 ppm. The synthesis of gas was not significantly restored after the addition of Cu2+ in both variants of the experiment. Obtained patterns will be used as a basis for the development of novel universal biotechnologies of metal-containing sewage purification with simultaneous destruction of MFW.

scholarly journals GASEOUS FUEL OBTAINING VIA FERMENTATION OF ORGANIC LANDFILL WASTE

2021 ◽  
pp. 36-48
Author(s):  
Vira Hovorukha ◽  
Olesia Havryliuk ◽  
Galyna Gladka ◽  
Bida Iryna ◽  
Yanina Danko ◽  
...  
Keyword(s):  
Organic Waste ◽  
High Efficiency ◽  
Control Volume ◽  
Industrial Biotechnology ◽  
Hydrogen Yield ◽  
Methane Fermentation ◽  
Fossil Carbon ◽  
Gas Fermentation ◽  
Low Efficiency ◽  
Fermentation Parameters

Fossil carbon-containing fuel is currently one of the most common in industry and economy. The rapid depletion of reserves of this fuel makes it necessary to search for the alternative one. Landfills are a place where methane is spontaneously synthesized due to the decay of organic waste. Controlled and regulated fermentation of the landfill organics can provide biomethane as well as environmental bioremediation. The aim of the work was to study the patterns of methane fermentation of multi component organic waste and optimize the process to increase the efficiency of biomethane synthesis and waste decomposition. Colorimetric and potentiometric methods were used for pH and Eh measurement. Volumetric and chromatographic methods were applied to control volume and composition of synthesized gas. Fermentation parameters were calculated with the use of mathematical and statistical ones. The achievement of high efficiency of methane fermentation of organic waste due to the process regulation was shown. The modeling of unregulated fermentation of organic waste in landfills showed low efficiency of the process. It took 69 days. Weight of waste decreased only 5 times. Hydrogen yield was 5 L/kg of waste. Methane was not synthesized. The regular mass transfer, regulation of the process and waste grinding showed the greatest efficiency. Weight of waste decreased 20 times during only 14 days. Hydrogen yield was 27 L/kg, methane yield was 12 L/kg of waste. Thus, the absence of regulation caused long term decay of waste. The high efficiency is achieved due to regulation of the fermentation process. The results will serve as a basis for the development of industrial biotechnology for the utilization of organic waste to reduce the volume of existing landfills and produce methane energy. This will further allow bioremediation of contaminated areas, obtaining an alternative to fossil fuel biomethane.

Microcalorimeters for X-Ray Spectroscopy

1988 ◽  
Vol 102 ◽  
pp. 41
Author(s):  
E. Silver ◽  
C. Hailey ◽  
S. Labov ◽  
N. Madden ◽  
D. Landis ◽  
...  
Keyword(s):  
High Resolution ◽  
High Efficiency ◽  
Thermal Response ◽  
Low Noise ◽  
High Resolution Spectroscopy ◽  
Superconducting Transition ◽  
Sapphire Substrates ◽  
Laboratory Plasmas ◽  
Adiabatic Demagnetization ◽  
Theoretical Predictions

The merits of microcalorimetry below 1°K for high resolution spectroscopy has become widely recognized on theoretical grounds. By combining the high efficiency, broadband spectral sensitivity of traditional photoelectric detectors with the high resolution capabilities characteristic of dispersive spectrometers, the microcalorimeter could potentially revolutionize spectroscopic measurements of astrophysical and laboratory plasmas. In actuality, however, the performance of prototype instruments has fallen short of theoretical predictions and practical detectors are still unavailable for use as laboratory and space-based instruments. These issues are currently being addressed by the new collaborative initiative between LLNL, LBL, U.C.I., U.C.B., and U.C.D.. Microcalorimeters of various types are being developed and tested at temperatures of 1.4, 0.3, and 0.1°K. These include monolithic devices made from NTD Germanium and composite configurations using sapphire substrates with temperature sensors fabricated from NTD Germanium, evaporative films of Germanium-Gold alloy, or material with superconducting transition edges. A new approache to low noise pulse counting electronics has been developed that allows the ultimate speed of the device to be determined solely by the detector thermal response and geometry. Our laboratory studies of the thermal and resistive properties of these and other candidate materials should enable us to characterize the pulse shape and subsequently predict the ultimate performance. We are building a compact adiabatic demagnetization refrigerator for conveniently reaching 0.1°K in the laboratory and for use in future satellite-borne missions. A description of this instrument together with results from our most recent experiments will be presented.

Imaging and diffraction modes in Scanning Transmission Electron Microscopy

1986 ◽  
Vol 44 ◽  
pp. 684-687
Author(s):  
J. M. Cowley ◽  
R. Glaisher ◽  
J. A. Lin ◽  
H.-J. Ou
Keyword(s):  
Scanning Transmission Electron Microscopy ◽  
High Efficiency ◽  
Fiber Optic ◽  
Image Intensifier ◽  
Detector System ◽  
Detector Plane ◽  
Secondary Electrons ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Special Detector

Some of the most important applications of STEM depend on the variety of imaging and diffraction made possible by the versatility of the detector system and the serial nature, of the image acquisition. A special detector system, previously described, has been added to our STEM instrument to allow us to take full advantage of this versatility. In this, the diffraction pattern in the detector plane may be formed on either of two phosphor screens, one with P47 (very fast) phosphor and the other with P20 (high efficiency) phosphor. The light from the phosphor is conveyed through a fiber-optic rod to an image intensifier and TV system and may be photographed, recorded on videotape, or stored digitally on a frame store. The P47 screen has a hole through it to allow electrons to enter a Gatan EELS spectrometer. Recently a modified SEM detector has been added so that high resolution (10Å) imaging with secondary electrons may be used in conjunction with other modes.

Influence of MBE Growth Conditions on Dislocation Densities of GaAs/Ge Epilayers Grown on Silicon Substrates

1985 ◽  
Vol 43 ◽  
pp. 364-365
Author(s):  
K.M. Hones ◽  
P. Sheldon ◽  
B.G. Yacobi ◽  
A. Mason
Keyword(s):  
High Efficiency ◽  
Lattice Mismatch ◽  
Low Cost ◽  
Growth Conditions ◽  
Nonradiative Recombination ◽  
Device Structure ◽  
Si Substrates ◽  
Transmission Electron ◽  
Dislocation Densities ◽  
Dislocation Type

There is increasing interest in growing epitaxial GaAs on Si substrates. Such a device structure would allow low-cost substrates to be used for high-efficiency cascade- junction solar cells. However, high-defect densities may result from the large lattice mismatch (∼4%) between the GaAs epilayer and the silicon substrate. These defects can act as nonradiative recombination centers that can degrade the optical and electrical properties of the epitaxially grown GaAs. For this reason, it is important to optimize epilayer growth conditions in order to minimize resulting dislocation densities. The purpose of this paper is to provide an indication of the quality of the epitaxially grown GaAs layers by using transmission electron microscopy (TEM) to examine dislocation type and density as a function of various growth conditions. In this study an intermediate Ge layer was used to avoid nucleation difficulties observed for GaAs growth directly on Si substrates. GaAs/Ge epilayers were grown by molecular beam epitaxy (MBE) on Si substrates in a manner similar to that described previously.

The use of high-resolution FESEM to study solid-state phase transformations and reactions

1994 ◽  
Vol 52 ◽  
pp. 1028-1029
Author(s):  
P. G. Kotula ◽  
D. D. Erickson ◽  
C. B. Carter
Keyword(s):  
Solid State ◽  
High Resolution ◽  
Phase Transformations ◽  
High Efficiency ◽  
Sol Gel ◽  
Quantitative Information ◽  
Solid State Reactions ◽  
Critical Dimensions ◽  
Backscattered Electrons ◽  
Backscattered Electron

High-resolution field-emission-gun scanning electron microscopy (FESEM) has recently emerged as an extremely powerful method for characterizing the micro- or nanostructure of materials. The development of high efficiency backscattered-electron detectors has increased the resolution attainable with backscattered-electrons to almost that attainable with secondary-electrons. This increased resolution allows backscattered-electron imaging to be utilized to study materials once possible only by TEM. In addition to providing quantitative information, such as critical dimensions, SEM is more statistically representative. That is, the amount of material that can be sampled with SEM for a given measurement is many orders of magnitude greater than that with TEM.In the present work, a Hitachi S-900 FESEM (operating at 5kV) equipped with a high-resolution backscattered electron detector, has been used to study the α-Fe2O3 enhanced or seeded solid-state phase transformations of sol-gel alumina and solid-state reactions in the NiO/α-Al2O3 system. In both cases, a thin-film cross-section approach has been developed to facilitate the investigation. Specifically, the FESEM allows transformed- or reaction-layer thicknesses along interfaces that are millimeters in length to be measured with a resolution of better than 10nm.

Sign in / Sign up

Export Citation Format

Share Document