scholarly journals Assessing Uncertainty and Repeatability in Time-Lapse VSP Monitoring of CO2 Injection in a Brine Aquifer, Frio Formation, Texas (A Case Study)

2013 ◽  
Author(s):  
Siamak Nazari ◽  
Thomas M. Daley
Keyword(s):  
Time Lapse ◽  
Co2 Injection ◽  
Frio Formation ◽  
Brine Aquifer

Time-lapse VSP monitoring for CO2 injection: A case study in ordos, China

2018 ◽  
Vol 75 ◽  
pp. 41-51 ◽  
Author(s):  
Qiang Luo ◽  
Yibo Wang ◽  
Yongsheng Wang ◽  
Maoshan Chen ◽  
Yikang Zheng ◽  
...  
Keyword(s):  
Time Lapse ◽  
Co2 Injection

scholarly journals Evaluating the utility of time-lapse imaging in the estimation of post-mortem interval: An Australian case study

2019 ◽  
Vol 1 ◽  
pp. 204-210 ◽  
Author(s):  
Alyson Wilson ◽  
Stanley Serafin ◽  
Dilan Seckiner ◽  
Rachel Berry ◽  
Xanthé Mallett
Keyword(s):  
Time Lapse ◽  
Post Mortem ◽  
Post Mortem Interval ◽  
Australian Case ◽  
Time Lapse Imaging

scholarly journals The Effect of Carbonyl and Hydroxyl Compounds on Swelling Factor, Interfacial Tension, and Viscosity in CO2 Injection: A Case Study on Aromatic Oils

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 94
Author(s):  
Asep Kurnia Permadi ◽  
Egi Adrian Pratama ◽  
Andri Luthfi Lukman Hakim ◽  
Doddy Abdassah
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Viscosity Reduction ◽  
Co2 Injection ◽  
Minimum Miscibility Pressure ◽  
Lower Viscosity ◽  
Hydroxyl Compounds ◽  
Swelling Factor

A factor influencing the effectiveness of CO2 injection is miscibility. Besides the miscible injection, CO2 may also contribute to oil recovery improvement by immiscible injection through modifying several properties such as oil swelling, viscosity reduction, and the lowering of interfacial tension (IFT). Moreover, CO2 immiscible injection performance is also expected to be improved by adding some solvent. However, there are a lack of studies identifying the roles of solvent in assisting CO2 injection through observing those properties simultaneously. This paper explains the effects of CO2–carbonyl and CO2–hydroxyl compounds mixture injection on those properties, and also the minimum miscibility pressure (MMP) experimentally by using VIPS (refers to viscosity, interfacial tension, pressure–volume, and swelling) apparatus, which has a capability of measuring those properties simultaneously within a closed system. Higher swelling factor, lower viscosity, IFT and MMP are observed from a CO2–propanone/acetone mixture injection. The role of propanone and ethanol is more significant in Sample A1, which has higher molecular weight (MW) of C7+ and lower composition of C1–C4, than that in the other Sample A9. The solvents accelerate the ways in which CO2 dissolves and extracts oil, especially the extraction of the heavier component left in the swelling cell.

Time-lapse full waveform inversion based on curvelet transform: Case study of CO2 storage monitoring

2021 ◽  
Vol 110 ◽  
pp. 103417
Author(s):  
Dong Li ◽  
Suping Peng ◽  
Xingguo Huang ◽  
Yinling Guo ◽  
Yongxu Lu ◽  
...  
Keyword(s):  
Co2 Storage ◽  
Waveform Inversion ◽  
Curvelet Transform ◽  
Time Lapse ◽  
Full Waveform Inversion ◽  
Full Waveform

Estimating saturation and density changes caused by CO2 injection at Sleipner — Using time-lapse seismic amplitude-variation-with-offset and time-lapse gravity

2017 ◽  
Vol 5 (2) ◽  
pp. T243-T257 ◽  
Author(s):  
Martin Landrø ◽  
Mark Zumberge
Keyword(s):  
Gravity Data ◽  
Time Lapse ◽  
Co2 Injection ◽  
Injection Point ◽  
Amplitude Variation With Offset ◽  
Seismic Method ◽  
Seismic Amplitude ◽  
Gravity Measurements ◽  
Measured Time ◽  
Best Fit

We have developed a calibrated, simple time-lapse seismic method for estimating saturation changes from the [Formula: see text]-storage project at Sleipner offshore Norway. This seismic method works well to map changes when [Formula: see text] is migrating laterally away from the injection point. However, it is challenging to detect changes occurring below [Formula: see text] layers that have already been charged by some [Formula: see text]. Not only is this partly caused by the seismic shadow effects, but also by the fact that the velocity sensitivity for [Formula: see text] change in saturation from 0.3 to 1.0 is significantly less than saturation changes from zero to 0.3. To circumvent the seismic shadow zone problem, we combine the time-lapse seismic method with time-lapse gravity measurements. This is done by a simple forward modeling of gravity changes based on the seismically derived saturation changes, letting these saturation changes be scaled by an arbitrary constant and then by minimizing the least-squares error to obtain the best fit between the scaled saturation changes and the measured time-lapse gravity data. In this way, we are able to exploit the complementary properties of time-lapse seismic and gravity data.

Time-Lapse Seismic for Reservoir Management: Case Studies From Offshore Niger Delta, Nigeria

2016 ◽  
Vol 19 (03) ◽  
pp. 391-402
Author(s):  
Sunday Amoyedo ◽  
Emmanuel Ekut ◽  
Rasaki Salami ◽  
Liliana Goncalves-Ferreira ◽  
Pascal Desegaulx
Keyword(s):  
Case Studies ◽  
Niger Delta ◽  
Reservoir Management ◽  
Time Lapse ◽  
Seismic Survey ◽  
Elastic Model ◽  
Field Development ◽  
4D Seismic ◽  
The Impact

Summary This paper presents case studies focused on the interpretation and integration of seismic reservoir monitoring from several fields in conventional offshore and deepwater Niger Delta. The fields are characterized by different geological settings and development-maturity stages. We show different applications varying from qualitative to quantitative use of time-lapse (4D) seismic information. In the first case study, which is in shallow water, the field has specific reservoir-development challenges, simple geology, and is in phased development. On this field, 4D seismic, which was acquired several years ago, is characterized by poor seismic repeatability. Nevertheless, we show that because of improvements from seismic reprocessing, 4D seismic makes qualitative contributions to the ongoing field development. In the second case study, the field is characterized by complex geological settings. The 4D seismic is affected by overburden with strong lateral variations in velocity and steeply dipping structure (up to 40°). Prestack-depth-imaging (PSDM) 4D seismic is used in a more-qualitative manner to monitor gas injection, validate the geologic/reservoir models, optimize infill injector placement, and consequently, enhance field-development economics. The third case study presents a deep offshore field characterized by a complex depositional system for some reservoirs. In this example, good 4D-seismic repeatability (sum of source- and receiver-placement differences between surveys, dS+dR) is achieved, leading to an increased quantitative use of 4D monitoring for the assessment of sand/sand communication, mapping of oil/water (OWC) front, pressure evolution, and dynamic calibration of petro-elastic model (PEM), and also as a seismic-based production-logging tool. In addition, 4D seismic is used to update seismic interpretation, provide a better understanding of internal architecture of the reservoirs units, and, thereby, yield a more-robust reservoir model. The 4D seismic in this field is a key tool for field-development optimization and reservoir management. The last case study illustrates the need for seismic-feasibility studies to detect 4D responses related to production. In addition to assessing the impact of the field environment on the 4D- seismic signal, these studies also help in choosing the optimum seismic-survey type, design, and acquisition parameters. These studies would possibly lead to the adoption of new technologies such as broad-band streamer or nodes acquisition in the near future.

Sign in / Sign up

Export Citation Format

Share Document