scholarly journals Security during the Construction of New Nuclear Power Plants: Technical Basis for Access Authorization and Fitness-For-Duty Requirements

2009 ◽  
Author(s):  
Kristi M. Branch ◽  
Kathryn A. Baker
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fitness For Duty ◽  
Technical Basis

Allowable Flaw Size of Japanese Cast Stainless Steel Pipe Using Probabilistic Fracture Mechanics Method

2017 ◽  
Author(s):  
Shotaro Hayashi ◽  
Mayumi Ochi ◽  
Kiminobu Hojo ◽  
Takahisa Yamane ◽  
Wataru Nishi
Keyword(s):  
Stainless Steel ◽  
Fracture Mechanics ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Thermal Ageing ◽  
Probabilistic Fracture Mechanics ◽  
Stainless Steel Pipe ◽  
Technical Basis ◽  
Cast Stainless Steel

The cast austenitic stainless steel (CASS) that is used for the primary loop pipes of nuclear power plants is susceptible to thermal ageing during plant operation. The Japanese JSME rules on fitness-for-service (JSME rules on FFS)[1] for nuclear power plants specify the allowable flaw depths. However, some of these allowable flaw sizes are small compared with the smallest flaw sizes, which can be detected by nondestructive testing. ASME Section XI Code Case N-838[2] recently specified the maximum tolerable flaw depths for CASS pipes determined by probabilistic fracture mechanics (PFM). In a similar way, the allowable flaw depths of CASS pipes were calculated by PFM analysis code “PREFACE”[3] which considers uncertainty of the mechanical properties of Japanese PWR CASS materials. In order to confirm the validity of PREFACE, the allowable flaw depths calculated by PREFACE were compared with the maximum tolerable flaw depths in the technical basis of Code Case N-838. As a result, although the J calculation method and the embrittlement prediction model of CASS are different, these were qualitatively consistent. In addition, the sensitivity of ferrite content to the allowable flaw depths was investigated.

Development of the Methodology for Application of Revised Source Term to Operating Nuclear Power Plants in Korea

2004 ◽  
Author(s):  
Moon Soo Park ◽  
Chang-Sun Kang ◽  
Joo-Hyun Moon
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Source Term ◽  
Current Trend ◽  
Fission Products ◽  
Nuclear Plants ◽  
Limited Application ◽  
Technical Basis ◽  
Release Timing

Considering the current trend in applying the revised source term proposed by NUREG-1465 to the nuclear power plants in the U. S., it is expected that the revised source term will be applied to the Korean operating nuclear power plants in the near future, even though the exact time can not be estimated. To meet the future technical demands, it is necessary to prepare the technical system including the related regulatory requirements in advance. In this research, therefore, it is intended to develop the methodology to apply the revised source term to operating nuclear power plants in Korea. Several principles were established to develop the application methodologies. First, it is not necessary to modify the existing regulations about source term (i.e., any back-fitting to operating nuclear plants is not necessary). Second, if the pertinent margin of safety is guaranteed, the revised source term suggested by NUREG-1465 may be useful to full application. Finally, a part of revised source term could be selected to application based on the technical feasibility. As the results of this research, several methodologies to apply the revised source term to the Korean operating nuclear power plants have been developed, which include 1) the selective (or limited) application to use only some of all the characteristics of the revised source term, such as release timing of fission products and chemical form of radio-iodine and 2) the full application to use all the characteristics of the revised source term. The developed methodologies are actually applied to Ulchin 9&4 units and their application feasibilities are reviewed. The results of this research are used as either a manual in establishing the plan and the procedure for applying the revised source term to the domestic nuclear plant from the utility’s viewpoint; or a technical basis of revising the related regulations from the regulatory body’s viewpoint.

Sign in / Sign up

Export Citation Format

Share Document