scholarly journals Studies of low temperature, low flux radiation embrittlement of nuclear reactor structural materials. Final report

1993 ◽  
Author(s):  
G.R. Odette ◽  
G.E. Lucas
Keyword(s):  
Low Temperature ◽  
Nuclear Reactor ◽  
Structural Materials ◽  
Final Report ◽  
Radiation Embrittlement

Progress of Research on Welding for Molybdenum Alloys

2014 ◽  
Vol 33 (3) ◽  
pp. 193-200 ◽  
Author(s):  
Jiteng Wang ◽  
Juan Wang ◽  
Yajiang Li ◽  
Deshuang Zheng
Keyword(s):  
High Temperature ◽  
Elevated Temperature ◽  
Low Temperature ◽  
Welded Joint ◽  
Structural Materials ◽  
Practical Applications ◽  
Traditional Technology ◽  
Molybdenum Alloys ◽  
Resistance To Oxidation ◽  
Temperature Applications

AbstractMolybdenum and molybdenum alloys are considered to be attractive structural materials for high-temperature applications. However, molybdenum alloys are sensitive to gas impurities and have the characteristics of low temperature embrittlement and less resistance to oxidation at elevated temperature. The toughness and strength of welded joint is not easy to be ensured by traditional technology. Recently, many efforts have been made to join molybdenum and its alloys. In this paper, we present the result of investigations on welding methods of molybdenum and its alloys and overview the practical applications in engineering. The key of joining molybdenum alloys is to improve the toughness of welded joint and prevent the generation of pores and cracks.

Status of District Heating Reactor and its Development Prospects in China

2018 ◽  
Author(s):  
Jing Zhao ◽  
Fei Xie ◽  
Zhihong Liu
Keyword(s):  
Low Temperature ◽  
Nuclear Reactor ◽  
District Heating ◽  
Heating System ◽  
Inherent Safety ◽  
Nuclear Heating Reactor ◽  
New Type ◽  
Nuclear Heating ◽  
Safety Features ◽  
Temperature Heating

Nuclear heating reactor is a new type of power plant that uses nuclear energy as heat source. Low temperature nuclear heating reactor should be the forerunner and main force for developing nuclear heating plant in China. Due to the lower water temperature required by the heating system, this dedicated, non-power generating nuclear reactor works at low temperatures and pressures with inherent safety features. The design, construction and operation of the nuclear heating reactors in various countries in the world were reviewed in this paper, and China’s new demonstration nuclear heating project and NHR-200 low-temperature heating reactor which would be used was discussed in the paper. We put forward the developing route and suggestion for the development of low-temperature heating reactor in China.

Study of Phase-Structural Transformations Resulting in Low-Temperature Radiation Embrittlement in Ferritic-Martensitic Steel

Atomic Energy ◽  
2019 ◽  
Vol 126 (1) ◽  
pp. 39-45
Author(s):  
S. I. Porollo ◽  
A. M. Dvoryashin ◽  
A. A. Ivanov ◽  
Yu. V. Konobeev ◽  
S. V. Shulepin
Keyword(s):  
Low Temperature ◽  
Martensitic Steel ◽  
Structural Transformations ◽  
Radiation Embrittlement ◽  
Temperature Radiation

Hydrogen Generation Using the Modular Helium Reactor

2004 ◽  
Author(s):  
Matt Richards ◽  
Arkal Shenoy
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Chemical Reactions ◽  
Nuclear Reactor ◽  
High Efficiency ◽  
Hydrogen Generation ◽  
Hybrid Process ◽  
Thermochemical Process ◽  
Process Heat ◽  
Splitting Water

Process heat from a high-temperature nuclear reactor can be used to drive a set of chemical reactions, with the net result of splitting water into hydrogen and oxygen. For example, process heat at temperatures in the range 850°C to 950°C can drive the sulfur-iodine (SI) thermochemical process to produce hydrogen with high efficiency. Electricity can also be used to split water, using conventional, low-temperature electrolysis (LTE). An example of a hybrid process is high-temperature electrolysis (HTE), in which process heat is used to generate steam, which is then supplied to an electrolyzer to generate hydrogen. In this paper we investigate the coupling of the Modular Helium Reactor (MHR) to the SI process and HTE. These concepts are referred to as the H2-MHR. Optimization of the MHR core design to produce higher coolant outlet temperatures is also discussed.

Sign in / Sign up

Export Citation Format

Share Document