scholarly journals Stress-relief displacements induced by drilling--applications to holographic measurements of in situ stress. Final technical report, August 15, 1988--August 14, 1990

1992 ◽  
Author(s):  
T.J. Ahrens ◽  
C.L. Smither
Keyword(s):  
Stress Relief ◽  
In Situ Stress ◽  
Technical Report

Integrated Application of Three In Situ Stress Measurement Techniques

2011 ◽  
Vol 301-303 ◽  
pp. 949-953
Author(s):  
Yuan Li ◽  
Lan Qiao ◽  
Zhi Li Sui
Keyword(s):  
Acoustic Emission ◽  
Hydraulic Fracturing ◽  
Stress Measurement ◽  
Stress Relief ◽  
In Situ Stress ◽  
In Situ Stresses ◽  
In Situ Stress Measurement ◽  
Iron Mine ◽  
Acoustic Emission Test

The CSIRO overcoring stress relief and hydraulic fracturing methods are the most popular methods used for the measurement of in-situ stress at depth. One major advantage of the CSIRO overcoring stress relief method is that the three dimensional state of stress can be obtained, but the measurement must be done in an excavated tunnel[1]. Hydraulic fracturing method can be carried out on the ground surface, but it assumed that one of the principal stresses direction is vertical[2,3]. In terms of the disadvantages of the two methods, the techniques based on core orientation and acoustic emission behavior of rocks are incorporated in the in-situ stress measurement in order to obtain the in-situ stress conditions at depth in Shuichang Iron Mine. According to the comparison of the measurement data obtained from the acoustic emission test in the laboratory and CSIRO overcoring stress relief measurement in the field, effectiveness of the acoustic emission test is confirmed. In addition, the relationships between in-situ stresses and tectonic settings are analyzed. Finally, the distribution of in-situ stresses in Shuichang Iron Mine is given, which provides a meaningful guideline for the following mining and design.

scholarly journals Geological Core Ground Reorientation Technology Application on In Situ Stress Measurement of an Over-Kilometer-Deep Shaft

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Chunde Ma ◽  
Xibing Li ◽  
Jiangzhan Chen ◽  
Yanan Zhou ◽  
Sen Gao
Keyword(s):  
Principal Stress ◽  
Stress Measurement ◽  
Stress Relief ◽  
Maximum Principal Stress ◽  
In Situ Stress ◽  
Vertical Stress ◽  
Geometry Model ◽  
In Situ Stress Measurement ◽  
Stress Changes

As mining progresses to depth, engineering activities face the extreme challenge of high in situ stress. To efficiently measure the deep in situ stress before engineering excavation, an innovative deep in situ stress measurement method capable of the geological core ground reorientation technology and acoustic emission (AE) technology was proposed. With this method, nonorientation geological cores collected from the thousand-meter-deep borehole were reoriented based on the spatial spherical geometry model and borehole bending measurement principle. The distribution of deep in situ stress of an over-kilometer-deep shaft in the Xiangxi gold mine was investigated with real-time synchronized MTS 815 material testing machine and PCI-II AE instrument. The results show that the in situ stress changes from being dominated by horizontal stress to being dominated by vertical stress with depth. The horizontal maximum principal stress and vertical stress gradually increase with depth and reach a high-stress level (greater than 25 MPa) at a depth of 1000 m. The direction of the maximum principal stress is near the north. Meanwhile, to analyze the accuracy of the measured in situ stress comparatively, the stress relief measurements were performed at a depth of 655–958 m in the mine, using the Swedish LUT rock triaxial in situ stress measurement system. The distribution of deep in situ stress obtained by the stress relief method agrees well with that by the AE method, which proves the reliability of the AE in situ stress testing method based on the geological core ground reorientation technology.

scholarly journals In-situ stress project, Technical Report Number 9; Interpretation of hydraulic fracturing data from Yongping, western Yunnan, China

1987 ◽  
Author(s):  
J.E. Springer ◽  
Zhai Qingshan ◽  
B.C. Haimson ◽  
M.D. Zoback ◽  
M.Y. Lee ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
In Situ Stress ◽  
Technical Report ◽  
Western Yunnan
Sign in / Sign up

Export Citation Format

Share Document