scholarly journals Study of the possibilities to reuse construction and demolition waste

2019 ◽  
pp. 246-252 ◽  
Author(s):  
Denitsa Hvarchilkova ◽  
Margarita Filipova ◽  
Ivanka Zheleva
Keyword(s):  
Waste Management ◽  
Building Materials ◽  
Raw Materials ◽  
Road Construction ◽  
Waste Recycling ◽  
Construction And Demolition Waste ◽  
The European Union ◽  
Demolition Waste ◽  
Construction Waste ◽  
Outdoor Sports

For environment protection in the European Union (EU) it is very important the construction waste to be recycled and reused. The potential for the construction waste recycling and reuse is high, as their components have high cost. There is an opportunity for re-use of such materials in road construction, for drainage systems, for outdoor sports grounds and other construction sites. In 2012 a regulation on the management of construction waste and on the use of recycled building materials was adopted in Bulgaria, aiming to introduce a new model for the management of construction waste. This would guarantee: creation of favorable legislative and economic conditions for implementation of technologies ensuring the achievement of recycling and recovery targets but which are also financially viable in line with the country's incomes; identifying the persons responsible for covering the costs of building waste management and achieving the recycling and recovery targets; creating conditions for the production and marketing of materials from recycling of construction waste at a price that is competitive with the same new raw materials used in construction. The main effect expected from this normative document is to contribute to Bulgaria's development towards European trends, environmental protection through an integrated framework for the management of construction and demolition waste that will reduce the harmful impacts on it caused by construction waste, improving the efficiency of resource use, increasing the responsibilities of pollutants and stimulating investment in waste management.

scholarly journals A Comprehensive Summary of Available Legislation and Practices in Demolition and Construction & Demolition Waste Management in the Arctic Region

2021 ◽  
Vol 64 (1) ◽  
pp. 145-162
Author(s):  
Iveta Nováková ◽  
Tatiana Drozdyuk ◽  
Katja Ohenoja ◽  
Arcady Ayzenshtadt ◽  
Bård Arntsen ◽  
...  
Keyword(s):  
Environmental Impact ◽  
Waste Management ◽  
Building Materials ◽  
Construction And Demolition Waste ◽  
The Arctic ◽  
The European Union ◽  
Demolition Waste ◽  
Climate Conditions ◽  
Good Practices ◽  
Management Protocol

Abstract The need for better natural resource use is currently increasingly recognised, and high emphasis is given to the circularity of building materials and the reduction of activities with negative environmental impact. Legislation, guidelines, and other documentation play an important role in improving demolition activities and construction and demolition waste (CDW) management. Good practices in CDW handling is not achievable without knowledge about CDW recovery techniques described in guidelines and other documents. Demolition activities in arctic regions could be more challenging due to harsh climate conditions, and therefore the cooperation between Russia, Norway and Finland was established to boost the uptake of good practices in demolition activities and CDW management. The main subject of this article is an overview of presently used demolition practices, CDW management, and verification of areas where practices with lower environmental impact and increase of material circularity could be utilised. Two fundamental documents, namely “EU Construction & Demolition Waste Management Protocol” and “Guidelines for the waste audits before demolition and renovation works of buildings” [1, 2], were published by the European Union (EU) in 2019 and serve as a foundation for changes in demolition activities and CDW management in EU and adventitiously also in the Russian Federation and Norway.

scholarly journals Construction and Demolition Waste Management (Tehran Case Study)

2016 ◽  
Vol 6 (6) ◽  
pp. 1249-1252 ◽  
Author(s):  
B. Rouhi Broujeni ◽  
G. A. Omrani ◽  
R. Naghavi ◽  
S. S. Afraseyabi
Keyword(s):  
Waste Management ◽  
Environmental Protection Agency ◽  
Raw Materials ◽  
Construction And Demolition Waste ◽  
Hazardous Wastes ◽  
Correct Identification ◽  
Demolition Waste ◽  
Construction Waste ◽  
Building Components ◽  
Market Needs

Increasing building construction raises concerns about construction and demolition (C&D) waste management. To assess this issue the building components, the collection schemes, their recycling and disposal should be investigated. In order to manage C&D wastes, paying attention to how this kind of wastes is disposed is imperative for their correct identification. Inattention, lack of organization and proper transport and sanitary disposal of construction and demolition waste lead to problems such as accumulation of construction waste in the streets. However, more than 90 percent of the potential for recycling and re-using as raw materials is provided. Environmental Protection Agency (EPA) has classified C&D wastes into three categories: non-dangerous waste, hazardous wastes and semi-hazardous wastes. Currently in Tehran, an average of about 50,000 tons per day of construction and demolition wastes are produced from which over 30,000 tons per day are dumped in landfills. According to this research more than 57% of these wastes are placed in the first category (non-dangerous waste) and have the potential for being recycled and reused. On the other hand, items that are placed in the second category shall be managed based on the existing laws. This article provides some management solutions including proposing methods for collecting and reusing construction waste in accordance with current market needs in Iran.

scholarly journals Development of construction waste management

2019 ◽  
Vol 97 ◽  
pp. 06040
Author(s):  
Aleksandr Aleksanin
Keyword(s):  
Waste Management ◽  
Building Materials ◽  
Statistical Data ◽  
Information Resources ◽  
Environmental Benefits ◽  
Construction And Demolition Waste ◽  
Private Business ◽  
Demolition Waste ◽  
Construction Waste ◽  
Management Processes

Improvement of building materials, optimization and development of technological processes of construction production require the development of promising areas of research to improve the efficiency of management of construction waste, which will provide economic and environmental benefits. The article provides statistical data on the volumes of formation and processing of construction and demolition waste, confirming the relevance and need for attention to the area of construction waste disposal. To improve the efficiency of construction and demolition waste management processes, it is proposed to create specialized centers that perform specific functions of coordinating material and information resources, which will track and coordinate the entire life cycle of waste from the source of education to the place of disposal or recycling. To improve the efficiency of processes for optimizing the management of construction waste, it is proposed to attract to them the organizational, economic and technological capabilities of private business.

scholarly journals Crushed Bricks: Demolition Waste as a Sustainable Raw Material for Geopolymers

2021 ◽  
Vol 13 (14) ◽  
pp. 7572
Author(s):  
Gigliola D’Angelo ◽  
Marina Fumo ◽  
Mercedes del Rio Merino ◽  
Ilaria Capasso ◽  
Assunta Campanile ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Building Materials ◽  
Mechanical Performance ◽  
Raw Materials ◽  
Construction Material ◽  
Raw Material ◽  
The European Union ◽  
Total Energy Consumption ◽  
Demolition Waste ◽  
Crushed Brick

Demolition activity plays an important role in the total energy consumption of the construction industry in the European Union. The indiscriminate use of non-renewable raw materials, energy consumption, and unsustainable design has led to a redefinition of the criteria to ensure environmental protection. This article introduces an experimental plan that determines the viability of a new type of construction material, obtained from crushed brick waste, to be introduced into the construction market. The potential of crushed brick waste as a raw material in the production of building precast products, obtained by curing a geopolymeric blend at 60 °C for 3 days, has been exploited. Geopolymers represent an important alternative in reducing emissions and energy consumption, whilst, at the same time, achieving a considerable mechanical performance. The results obtained from this study show that the geopolymers produced from crushed brick were characterized by good properties in terms of open porosity, water absorption, mechanical strength, and surface resistance values when compared to building materials produced using traditional technologies.

scholarly journals Conformidade de sistemas de gerenciamento de resíduos da construção civil

2020 ◽  
Vol 9 (19) ◽  
Author(s):  
Daniela Carnasciali de Andrade Mann ◽  
André Nagalli ◽  
Karina Querne De Carvalho
Keyword(s):  
Waste Management ◽  
Construction And Demolition Waste ◽  
Legal Compliance ◽  
Demolition Waste ◽  
Environmental Certification ◽  
Construction Waste ◽  
Palabras Clave ◽  
Environmental Audits ◽  
The City ◽  
Poor Management

Resumo Normas relacionadas à gestão de Resíduos de Construção Civil (RCC) estão vigentes no Brasil há mais de uma década. O intuito dessa gestão é amenizar os impactos ambientais decorrentes do gerenciamento indevido desses resíduos. O objetivo do presente trabalho é investigar a conformidade técnica e legal de sistemas de gerenciamento de resíduos de construção civil no município de Curitiba. Para tal, elaborou-se uma lista de verificação baseada nas normas em vigor e em alguns modelos de certificações ambientais, como: LEED, AQUA, CASBEE, BREAM e HQE. 24 obras de edifícios residenciais e comerciais foram  visitadas — com ou sem certificação ambiental. Essa lista de verificação foi aplicada nas construções, para realizar um diagnóstico do setor. Apesar da gestão de resíduos ser obrigatória e restritiva à obtenção dos certificados de conclusão de obra, os resultados da pesquisa demonstraram que há problemas na segregação, acondicionamento e transporte dos resíduos. Entretanto, a falta de conscientização e a aparente conformidade documental não se traduz em efetivo gerenciamento dos RCC. Palavras-chave: Resíduos de construção e demolição. Gestão de resíduos. Resíduos sólidos. Auditorias ambientais. Abstract Standards related to the management of Construction Waste (CW) have been in force in Brazil for more than a decade. The goal of this management is to alleviate the environmental impacts resulting from the poor management of these wastes. The objective of this work is to investigate the technical and legal compliance of construction waste management systems in the city of Curitiba. To this end, a checklist was drawn up based on current standards and on some models of environmental certifications, such as: LEED, AQUA, CASBEE, BREAM and HQE. 24 works of residential and commercial buildings were visited — with or without environmental certification.  A checklist was applied, in these buildings, to promote a diagnosis of the sector. Although waste management is mandatory and restrictive to obtain building completion certificates, the research results showed that there are problems in the segregation, packaging and transport of waste. However, the lack of awareness and the apparent documentary compliance does not translate into effective management of the CW. Keywords:  Construction and demolition waste. Waste management. Solid waste. Environmental audits. Resumen Normas relativas a la gestión de Residuos Sólidos de Construcción Civil (RCC) están vigentes en Brasil hace más de una década. La intención de esa gestión es amenizar los impactos ambientales producidos por la gestión inadecuada de esos residuos. El objetivo de este trabajo es investigar la conformidad técnica y legal de sistemas de gestión de residuos de la construcción civil en el municipio de Curitiba. Para ello, se elaboró una lista de cotejo basada en las normas vigentes y en algunos modelos de certificaciones ambientales como: LEED, AQUA, CASBEE, BREAM y HQE. Se visitaron 24 obras de edificios residenciales y comerciales — con o sin permiso ambiental. Se aplicó esa lista de cotejo en las construcciones, para realizar un diagnóstico des sector. Aunque la gestión de residuos sea obligatoria y restrictiva para la obtención de las certificaciones de conclusión de obra, los resultados de la investigación demostraron que hay problemas en la segregación, acondicionamiento y trasporte de los residuos. Sin embargo, la falta de conciencia y la aparente conformidad en materia de documentos no se traduce en una gestión eficiente de los RCC. Palabras-clave: Residuos de construcción y demolición. Gestión de residuos. Residuos sólidos. Auditorías ambientales.

scholarly journals Evaluation of Rules and regulation of Construction and Demolition Waste Management (CDWM) in India

2019 ◽  
Vol 8 (2S11) ◽  
pp. 2642-2644
Keyword(s):  
Environmental Impact ◽  
Waste Management ◽  
Construction Industry ◽  
Construction And Demolition Waste ◽  
Construction Sites ◽  
Demolition Waste ◽  
Construction Waste

The rules and regulations on waste management in the construction and demolition sector are analyzed corresponding to the present scenario of C&DW in India. C&D waste from construction sites has emerged as a significant threat to India because of its severe footprint on the environment. Vast quantities of construction waste will have unfavorable consequences on the surroundings if they are not properly managed. Therefore it is necessary to manage the development of C&DW by the experts within the construction industry. The approach represented is specialized in rules and regulations on waste management so that the environmental impact of construction activities can be minimized.

A Brief Analysis of Domestic Construction and Demolition Waste Recycling Techniques

2012 ◽  
Vol 509 ◽  
pp. 1-5
Author(s):  
Su Ping Cui ◽  
Qi Dong Liu ◽  
Jian Hua Yan ◽  
Xin Du
Keyword(s):  
Natural Disaster ◽  
Waste Recycling ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Demolition Waste ◽  
Construction Waste ◽  
Healthy Development ◽  
Industrial Chain ◽  
Recycling Techniques

In this paper, the construction and demolition waste (C&D waste) recycling techniques in China is summarized, and proposed the C&D waste recycling suggestions in this foundation. The C&D waste can be divided into construction waste, decorating waste, demolition waste and natural disaster ruin waste. In addition to be buried, domestic C&D waste can be made into landscape material, roadbed material, recycled aggregate, recycled brick, recycled concrete, recycled admixture and so on. The state should establish positive promoting policies, improve the recycling industrial chain, and promote the healthy development of the C&D waste recycling.

scholarly journals Construction Waste Production in Macroeconomic Context

2021 ◽  
Vol 1203 (2) ◽  
pp. 022080
Author(s):  
Martin Marek ◽  
Jana Korytárová
Keyword(s):  
National Economy ◽  
Point Of View ◽  
Construction And Demolition Waste ◽  
Total Production ◽  
The European Union ◽  
Demolition Waste ◽  
Construction Waste ◽  
Waste Production ◽  
The Impact ◽  
The Eu

Abstract This article aims at presenting the economic impacts of implementing the basic principles of construction demolition waste management in terms of saving construction costs. Emphasis is placed on fulfilling the 3R principle, i.e. reducing waste, reusing it, and recycling resources and products. Construction and demolition waste represents the largest mass waste flow in the EU, e.g. in 2018, it represented 36% of the total waste production in the whole EU- 27. The European Union is gradually introducing measures to reduce the production of construction waste compared to the Czech Republic, where the share of construction demolition waste on the total production was up to 42% in 2018. This value exceeds the EU-27 average. The article analyses available statistical data from the national CZSO and the European statistical office EUROSTAT on the waste production classified according to EWC-STAT, which is a classification of waste according to Directive No. 2150/2002. Items monitoring the waste produced by the construction industry are listed on the 41st to 43rd place of the EWC-STAT list of all monitored waste. The data obtained allows comparing three branches of construction production, the 41st Building construction, 42nd Civil engineering, and 43rd Specialized construction activities. Another possibility to obtain data is to use a division according to the waste producer economic activity (CZ NACE). The data obtained in this way is compared with the performance indicators of the national economy. By comparing the size of the construction demolition waste production with the performance of the national economy (especially the GDP indicator), the degree of their interdependence was determined. The aim of the analysis is to assess the relation between the country’s economic performance and the production of construction and demolition waste. The next step was to perform an analysis from the point of view of the 3R principle in order to examine the impact of measures to reduce the construction demolition waste production in connection with the already initiated processes of its possible recycling or reuse.

scholarly journals GERAÇÃO DE RESÍDUOS NA CONSTRUÇÃO CIVIL

2021 ◽  
Vol 9 (209) ◽  
pp. 1-16
Author(s):  
Samira Mansur Monteiro de Barros
Keyword(s):  
Construction Industry ◽  
Raw Materials ◽  
Construction And Demolition Waste ◽  
Demolition Waste ◽  
Public Places ◽  
Construction Waste ◽  
Final Destination ◽  
Negative Impacts ◽  
The One

The problems arising from construction and demolition waste have always been in our country. The civil construction industry is the sector that generates the most waste that impacts society and is the one that consumes the most raw materials. As a result, it is necessary and extremely important that there is a sustainable management of construction waste. The irregular dispositions of these residues cause many negative impacts to the environment, since they are often thrown in vacant lots, permanent preservation areas, roads and public places, harming the quality of life of the population. Recycling can generate a significant economic advantage in relation to the final destination both in regular deposits and mainly in relation to the irregular ones that cause so much damage to the environment. This study sought to collect information on the current situation on construction waste. And in order to be developed, the present work used bibliographic research in books, specialized magazines, periodicals, and electronic media. Concluding in the final considerations, in which vital points of the research are presented followed by the stimulations the continuity of the studies and the reflections on the generation of solid residues in the civil construction.

scholarly journals Environmental Impacts and Benefits of the End-of-Life of Building Materials: Database to Support Decision Making and Contribute to Circularity

2021 ◽  
Vol 13 (22) ◽  
pp. 12659
Author(s):  
Ana Antunes ◽  
Ricardo Martins ◽  
José Dinis Silvestre ◽  
Ricardo do Carmo ◽  
Hugo Costa ◽  
...  
Keyword(s):  
Decision Making ◽  
Waste Management ◽  
End Of Life ◽  
Environmental Impacts ◽  
Building Materials ◽  
National Level ◽  
Construction And Demolition Waste ◽  
Demolition Waste ◽  
Life Phase ◽  
The Impact

This paper outlines a methodology for structuring a generic database of environmental impacts on the end-of-life phase of buildings, which can be used at the national level, in accordance with European standards. A number of different options are also considered for managing construction and demolition waste (CDW), as well as for promoting the circularity of materials in construction. The database structure has been developed for use by the main stakeholders who decide the disposal scenario for the main CDW flows, assess waste management plans, and identify the corresponding environmental aspects. The impact categories considered in this paper are global warming potential (GWP) and the abiotic depletion potential of fossil fuels (ADP (f.f.)). This lifecycle assessment (LCA) database further facilitates the identification of important information, such as possible treatments for CDW, or suppliers of recycled materials for use in new construction. Two demolition case studies were used to confirm the benefits of the proposed database. Two demolition scenarios are assessed—traditional and selective—in order to demonstrate the advantage of selective demolition in waste management. The results obtained from the environmental assessment of CDW flows demonstrate that the proposed database can be an important and useful tool for decision making about the end-of-life of construction materials, as it is designed to maximize their reuse and recycling. An innovative online platform can be created based on this database, contributing to the reduction of the environmental impacts associated with the end-of-life phase of buildings.

Sign in / Sign up

Export Citation Format

Share Document