scholarly journals EFFECT OF SODIUM HYDROXIDE CONCENTRATION AND SODIUM SILICATE TO SODIUM HYDROXIDE RATIO ON PROPERTIES OF CALCINED KAOLIN-WHITE PORTLANDCEMENT GEOPOLYMER

2018 ◽  
Vol 14 (46) ◽  
Author(s):  
Saengsuree Pangdaeng
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Sodium Hydroxide Concentration ◽  
Calcined Kaolin

Study on the Chemical Modification Process of Jute Fiber

TAPPI Journal ◽  
2010 ◽  
Vol 9 (2) ◽  
pp. 23-29 ◽  
Author(s):  
Wei-ming Wang ◽  
Zai-sheng Cai ◽  
Jian-yong Yu
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Treatment Time ◽  
Jute Fiber ◽  
Process Conditions ◽  
Silicate Concentration ◽  
Sodium Hydroxide Concentration ◽  
Liquor Ratio ◽  
Degumming Process ◽  
Selection Of

Degumming of pre-chlorite treated jute fiber was studied in this paper. The effects of sodium hydroxide concentration, treatment time, temperature, sodium silicate concentration, fiber-to-liquor ratio, penetrating agent TF-107B concentration, and degumming agent TF-125A concentration were the process conditions examined. With respect to gum decomposition, fineness and mechanical properties, sodium hydroxide concentration, sodium silicate concentration, and treatment time were found to be the most important parameters. An orthogonal L9(34) experiment designed to optimize the conditions for degumming resulted in the selection of the following procedure: sodium hydroxide of 12g/L, sodium silicate of 3g/L, TF-107B of 2g/L, TF-125A of 2g/L, treatment time of 105 min, temperature of 100°C and fiber to liquor ratio of 1:20. The effect of the above degumming process on the removal of impurities was also examined and the results showed that degumming was an effective method for removing impurities, especially hemicellulose.

scholarly journals Bleaching Flax Roving With Poly(Acrylic Acid) Magnesium Salt As Oxygen Bleaching Stabilizer For Hydrogen Peroxide

2021 ◽  
Author(s):  
Jie Liu ◽  
Wenqi Jiang ◽  
Ling Sun ◽  
Chun Lv
Keyword(s):  
Hydrogen Peroxide ◽  
Acrylic Acid ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Magnesium Salt ◽  
Capillary Effect ◽  
Sodium Hydroxide Concentration ◽  
Silicon Oxygen ◽  
Oxygen Bleaching ◽  
Poly Acrylic Acid

Abstract Alkali-oxygen one-bath scouring and bleaching process of the flax roving was studied by using a new type of synthesized non-silicon oxygen bleaching stabilizer Poly(acrylic acid) magnesium instead of sodium silicate. Based on the analysis of the effects of single factors such as sodium hydroxide concentration, hydrogen peroxide concentration, temperature, time and the amount of the synthesized non-silicon oxygen bleaching stabilizer poly(acrylic acid) magnesium salt on the performance of the bleached flax roving, including the whiteness, the breaking tenacity, the capillary effect and the weight loss ratio. The optimal process for the application of the stabilizer was determined by orthogonal test, namely, hydrogen peroxide concentration 8.5 g/L, sodium hydroxide concentration 5 g/L, sodium bisulfite 3 g/L, sodium carbonate 3 g/L, the synthesized non-silicon oxygen bleaching stabilizer poly(acrylic acid) magnesium 5.5 g/L, scoured and bleached at 90 ℃ for 60 min, and the bath ratio was 25:1. Compared with the traditional oxygen bleaching stabilizer sodium silicate, it not only has good ability to inhibit the rapid decomposition of hydrogen peroxide, but also has the advantages of higher whiteness, higher capillary effect, good feel and breaking tenacity, and can effectively solve the "silicon scale" problem and improve the quality of flax products.

scholarly journals Effect of sodium hydroxide concentration on the compressive strength of geopolymer mortar using fly ash PLTU Tanjungjati B Jepara

2022 ◽  
Vol 955 (1) ◽  
pp. 012010
Author(s):  
A Kustirini ◽  
Antonius ◽  
P Setiyawan
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Coal Industry ◽  
Waste Materials ◽  
Geopolymer Concrete ◽  
Sodium Hydroxide Concentration ◽  
Alkaline Activator ◽  
Maximum Compressive Strength

Abstract Geopolymer concrete is concrete that uses environmentally friendly materials, using fly ash from waste materials from the coal industry as a substitute for cement. To produce geopolymer concrete, an alkaline activator is required, with a mixture of Sodium Hydroxide and Sodium Silicate. This research is an experimental study to determine the effect of variations in the concentration of sodium hydroxide (NaOH) 8 Mol, 10 Mol, 12 Mol, and 14 Mol on the compressive strength of geopolymer concrete. Mortar Geopolymer uses a mixture of 1: 3 for the ratio of fly ash and sand, 2.5: 0.45 for the ratio of sodium silicate and sodium hydroxide as an alkaline solution. The specimens used a cube mold having dimension 5 cm x 5 cm x 5 cm, then tested at 7 days and 28 days. The test resulted that concentration of NaOH 12 Mol obtained the maximum compressive strength of geopolymer concrete, that is 38.54 MPa. At concentrations of 12 Mol NaOH and exceeding 12M, the compressive strength of geopolymer concrete decreased.

scholarly journals Effect of Sodium Hydroxide Concentration on the Mechanical Property of Non Sodium Silicate Fly Ash Based Geopolymer

2014 ◽  
Vol 14 (23) ◽  
pp. 3381-3384 ◽  
Author(s):  
R.H. Abdul Rahi ◽  
K.A. Azizli ◽  
Z. Man ◽  
T. Rahmiati ◽  
M.F. Nuruddin
Keyword(s):  
Mechanical Property ◽  
Fly Ash ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Sodium Hydroxide Concentration

scholarly journals Study on the Chemical Modification Process of Jute Fiber

2008 ◽  
Vol 3 (2) ◽  
pp. 155892500800300 ◽  
Author(s):  
Wei-ming Wang ◽  
Zai-sheng Cai ◽  
Jian-yong Yu
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Treatment Time ◽  
Jute Fiber ◽  
Process Conditions ◽  
Silicate Concentration ◽  
Sodium Hydroxide Concentration ◽  
Liquor Ratio ◽  
Degumming Process ◽  
Selection Of

Degumming of pre-chlorite treated jute fiber was studied in this paper. The effects of sodium hydroxide concentration, treatment time, temperature, sodium silicate concentration, fiber-to-liquor ratio, penetrating agent TF-107B concentration and degumming agent TF-125A concentration were the process conditions examined. With respect to gum decomposition, fineness and mechanical properties, sodium hydroxide concentration, sodium silicate concentration and treatment time were found to be the most important parameters. An orthogonal L9(34) experiment designed to optimize the conditions for degumming resulted in the selection of the following procedure: sodium hydroxide of 12g/L, sodium silicate of 3g/L, TF-107B of 2g/L, TF-125A of 2g/L, treatment time of 105 min, temperature of 100°C and fiber to liquor ratio of 1:20. The effect of the above degumming process on the removal of impurities was also examined and the results showed that degumming was an effective method for removing impurities, especially hemicellulose.

The Effect of Dry Mix Sodium Hydroxide onto Workability and Compressive Strength of Geopolymer Paste

2020 ◽  
Vol 12 (9) ◽  
Author(s):  
A. Z. Mohd Ali ◽  
◽  
N. A. Jalaluddin ◽  
N. Zulkiflee ◽  
◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Alkaline Solution ◽  
High Emission ◽  
New Material ◽  
Curing Regime ◽  
Solid Form ◽  
Geopolymer Paste

The production of ordinary Portland cement (OPC) consumes considerable amount of natural resources, energy and at the same time contribute in high emission of CO2 to the atmosphere. A new material replacing cement as binder called geopolymer is alkali-activated concrete which are made from fly ash, sodium silicate and sodium hydroxide (NaOH). The alkaline solution mixed with fly ash producing alternative binder to OPC binder in concrete named geopolymer paste. In the process, NaOH was fully dissolved in water and cooled to room temperature. This study aims to eliminate this process by using NaOH in solid form together with fly ash before sodium silicate liquid and water poured into the mixture. The amount of NaOH solids were based on 10M concentration. The workability test is in accordance to ASTM C230. Fifty cubic mm of the geopolymer paste were prepared which consists of fly ash to alkaline solution ratio of 1: 0.5 and the curing regime of 80℃ for 24 hours with 100% humidity were implemented. From laboratory test, the workability of dry method geopolymer paste were decreased. The compressive strength of the dry mix of NaOH showed 55% and the workability has dropped to 58.4%, it showed strength reduction compared to the wet mix method.

Thermal Resistance of Fly Ash Geopolymers with Alumina as Additive

2018 ◽  
Vol 281 ◽  
pp. 182-188
Author(s):  
Yong Sing Ng ◽  
Yun Ming Liew ◽  
Cheng Yong Heah ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Kamarudin Hussin
Keyword(s):  
Elevated Temperature ◽  
Fly Ash ◽  
Thermal Resistance ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Room Temperature ◽  
Strength Degradation ◽  
Alumina Addition ◽  
Higher Temperature ◽  
Temperature Exposure

The present work investigates the effect of alumina addition on the thermal resistance of fly ash geopolymers. Fly ash geopolymers were synthesised by mixing fly ash with activator solution (A mixture of 12M sodium hydroxide and sodium silicate) at fly ash/activator ratio of 2.5 and sodium silicate/sodium hydroxide ratio of 2.5. The alumina (0, 2 and 4 wt %) was added as an additive. The geopolymers were cured at room temperature for 24 hours and 60°C for another 24 hours. After 28 days, the geopolymers was heated to elevated temperature (200 - 1000°C). For unexposed geopolymers, the addition of 2 wt % of alumina increased the compressive strength of fly ash geopolymers while the strength decreased when the content increased to 4 wt.%. The temperature-exposed geopolymers showed enhancement of strength at 200°C regardless of the alumina content. The strength reduced at higher temperature exposure (> 200°C). Despite the strength degradation at elevated temperature, the strength attained was relatively high in the range of 13 - 45 MPa up to 1000°C which adequately for application as structural materials.

Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer

2015 ◽  
Vol 91 ◽  
pp. 1-8 ◽  
Author(s):  
Tanakorn Phoo-ngernkham ◽  
Akihiro Maegawa ◽  
Naoki Mishima ◽  
Shigemitsu Hatanaka ◽  
Prinya Chindaprasirt
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Bond Strengths

Correlation between Na2SiO3/NaOH and NaOH Molarity to Flexural Strength of Geopolymer Ceramic

2015 ◽  
Vol 754-755 ◽  
pp. 152-156 ◽  
Author(s):  
Nur Ain Jaya ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Che Mohd Ruzaidi Ghazali ◽  
M. Binhussain ◽  
Kamarudin Hussin ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Flexural Strength ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Alkali Activation ◽  
M 12 ◽  
Alkaline Activator

Clay based geopolymer ceramic were produced through the geopolymerisation process by the alkali activation of kaolin with an activator solution which is mixture of sodium silicate and sodium hydroxide and undergoes heating at elevated temperature. The concentration of NaOH used in this study was in the range of 6 M-12 M. The ratio of kaolin to alkaline activator used is 1.0. Three different ratios of Na2SiO3/NaOH of 0.16, 0.24 and 0.32 were used to investigate the optimum flexural strength. The samples were cured at 80 °C for 24 hours and sintered at temperatures ranging from 900 °C-1200 °C. The optimum flexural strength of 86.833 MPa is obtained when the ratios of Na2SiO3/NaOH is 0.24 with the NaOH concentration of 12M at 1200 °C.

scholarly journals Central Composite Design and Desirability of RSM for Optimization of Biodiesel Production from Mixture of Animal Waste Fat Oil and used Cooking Oil

2020 ◽  
Vol 9 (4) ◽  
pp. 1565-1571
Keyword(s):  
Reaction Time ◽  
Sodium Hydroxide ◽  
Maximum Yield ◽  
Animal Waste ◽  
Sodium Hydroxide Concentration ◽  
Used Cooking Oil ◽  
Input Parameters ◽  
Desirability Approach ◽  
Central Composite ◽  
Waste Fat

In this work, central composite design(CCD) and desirability approach of Response surface methodology (RSM) has been used for optimization of biodiesel yield produced from mixture of animal waste fat oil and used cooking oil (AWO) in the ratio of 1:1through alkaline transesterification process. In this work, methanol quantity, reaction time and sodium hydroxide concentration are selected as input parameters and yield selected as response. The combined effect of methanol quantity, reaction time and sodium hydroxide concentration were investigated and optimized by using RSM. The second order model is generated to predict yield as a function of methanol quantity, reaction time and sodium hydroxide concentration. A statistical model predicted the maximum yield of 96.9779% at 35ml methanol quantity (% v/v of oil), 75 min. reaction time and 0.6g (% wt./v of oil) of sodium hydroxide. Experimentally, the maximum yield of 97% was obtained at the above optimized input parameters. The variation of 0.02% was observed between experimental and predicted values. In this work, an attempt has also made to use desirability approach of RSM to optimize the input parameters to predict maximum yield. Desirability approach predicts maximum yield (97.075%) at CH3OH (35.832% vol. /vol. of oil), NaOH (0.604 % wt./vol. of oil) and reaction time (79.054min.) was found for the AWO.

Sign in / Sign up

Export Citation Format

Share Document